dt-bindings: ata: rename brcm, sata-brcmstb.txt to brcm, sata-brcm.txt

Renames the dt bindings document of Broadcom STB ahci driver to
common Broadcom ahci driver bindings document

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
new file mode 100644 (file)
index 0000000..126ee13
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
@@ -0,0 +1,36 @@
+* Broadcom SATA3 AHCI Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible         : should be one or more of
+                       "brcm,bcm7425-ahci"
+                       "brcm,bcm7445-ahci"
+                       "brcm,sata3-ahci"
+- reg                : register mappings for AHCI and SATA_TOP_CTRL
+- reg-names          : "ahci" and "top-ctrl"
+- interrupts         : interrupt mapping for SATA IRQ
+
+Also see ahci-platform.txt.
+
+Example:
+
+       sata@f045a000 {
+               compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+               reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+               reg-names = "ahci", "top-ctrl";
+               interrupts = <0 30 0>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               sata0: sata-port@0 {
+                       reg = <0>;
+                       phys = <&sata_phy 0>;
+               };
+
+               sata1: sata-port@1 {
+                       reg = <1>;
+                       phys = <&sata_phy 1>;
+               };
+       };

diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
deleted file mode 100644 (file)
index 6087283..0000000
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Broadcom SATA3 AHCI Controller for STB
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible         : should be one or more of
-                       "brcm,bcm7425-ahci"
-                       "brcm,bcm7445-ahci"
-                       "brcm,sata3-ahci"
-- reg                : register mappings for AHCI and SATA_TOP_CTRL
-- reg-names          : "ahci" and "top-ctrl"
-- interrupts         : interrupt mapping for SATA IRQ
-
-Also see ahci-platform.txt.
-
-Example:
-
-       sata@f045a000 {
-               compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
-               reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
-               reg-names = "ahci", "top-ctrl";
-               interrupts = <0 30 0>;
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               sata0: sata-port@0 {
-                       reg = <0>;
-                       phys = <&sata_phy 0>;
-               };
-
-               sata1: sata-port@1 {
-                       reg = <1>;
-                       phys = <&sata_phy 1>;
-               };
-       };