#define GAM15 0x8C /* Gamma Curve 15th segment input end point */
#define SLOP 0x8D /* Gamma curve highest segment slope */
#define DNSTH 0x8E /* De-noise threshold */
-#define EDGE0 0x8F /* Edge enhancement control 0 */
-#define EDGE1 0x90 /* Edge enhancement control 1 */
+#define EDGE_STRNGT 0x8F /* Edge strength control when manual mode */
+#define EDGE_TRSHLD 0x90 /* Edge threshold control when manual mode */
#define DNSOFF 0x91 /* Auto De-noise threshold control */
-#define EDGE2 0x92 /* Edge enhancement strength low point control */
-#define EDGE3 0x93 /* Edge enhancement strength high point control */
+#define EDGE_UPPER 0x92 /* Edge strength upper limit when Auto mode */
+#define EDGE_LOWER 0x93 /* Edge strength lower limit when Auto mode */
#define MTX1 0x94 /* Matrix coefficient 1 */
#define MTX2 0x95 /* Matrix coefficient 2 */
#define MTX3 0x96 /* Matrix coefficient 3 */
#define VOSZ_VGA 0xF0
#define VOSZ_QVGA 0x78
+/* DSPAUTO (DSP Auto Function ON/OFF Control) */
+#define AWB_ACTRL 0x80 /* AWB auto threshold control */
+#define DENOISE_ACTRL 0x40 /* De-noise auto threshold control */
+#define EDGE_ACTRL 0x20 /* Edge enhancement auto strength control */
+#define UV_ACTRL 0x10 /* UV adjust auto slope control */
+#define SCAL0_ACTRL 0x08 /* Auto scaling factor control */
+#define SCAL1_2_ACTRL 0x04 /* Auto scaling factor control */
+
/*
* ID
*/
*/
ov772x_reset(priv->client);
+ /*
+ * Edge Ctrl
+ */
+ if (priv->info->edgectrl.strength & OV772X_MANUAL_EDGE_CTRL) {
+
+ /*
+ * Manual Edge Control Mode
+ *
+ * Edge auto strength bit is set by default.
+ * Remove it when manual mode.
+ */
+
+ ret = ov772x_mask_set(priv->client, DSPAUTO, EDGE_ACTRL, 0x00);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ ret = ov772x_mask_set(priv->client,
+ EDGE_TRSHLD, EDGE_THRESHOLD_MASK,
+ priv->info->edgectrl.threshold);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ ret = ov772x_mask_set(priv->client,
+ EDGE_STRNGT, EDGE_STRENGTH_MASK,
+ priv->info->edgectrl.strength);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ } else if (priv->info->edgectrl.upper > priv->info->edgectrl.lower) {
+ /*
+ * Auto Edge Control Mode
+ *
+ * set upper and lower limit
+ */
+ ret = ov772x_mask_set(priv->client,
+ EDGE_UPPER, EDGE_UPPER_MASK,
+ priv->info->edgectrl.upper);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
+ ret = ov772x_mask_set(priv->client,
+ EDGE_LOWER, EDGE_LOWER_MASK,
+ priv->info->edgectrl.lower);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+ }
+
/*
* set size format
*/
#define OV772X_FLAG_VFLIP 0x00000001 /* Vertical flip image */
#define OV772X_FLAG_HFLIP 0x00000002 /* Horizontal flip image */
+/*
+ * for Edge ctrl
+ *
+ * strength also control Auto or Manual Edge Control Mode
+ * see also OV772X_MANUAL_EDGE_CTRL
+ */
+struct ov772x_edge_ctrl {
+ unsigned char strength;
+ unsigned char threshold;
+ unsigned char upper;
+ unsigned char lower;
+};
+
+#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */
+#define EDGE_STRENGTH_MASK 0x1F
+#define EDGE_THRESHOLD_MASK 0x0F
+#define EDGE_UPPER_MASK 0xFF
+#define EDGE_LOWER_MASK 0xFF
+
+#define OV772X_AUTO_EDGECTRL(u, l) \
+{ \
+ .upper = (u & EDGE_UPPER_MASK), \
+ .lower = (l & EDGE_LOWER_MASK), \
+}
+
+#define OV772X_MANUAL_EDGECTRL(s, t) \
+{ \
+ .strength = (s & EDGE_STRENGTH_MASK) | OV772X_MANUAL_EDGE_CTRL,\
+ .threshold = (t & EDGE_THRESHOLD_MASK), \
+}
+
+/*
+ * ov772x camera info
+ */
struct ov772x_camera_info {
unsigned long buswidth;
unsigned long flags;
struct soc_camera_link link;
+ struct ov772x_edge_ctrl edgectrl;
};
#endif /* __OV772X_H__ */