drm/i915: Improve CRTDDC mapping by using VBT info
authorDavid Müller (ELSOFT AG) <d.mueller@elsoft.ch>
Sat, 29 Aug 2009 06:54:45 +0000 (08:54 +0200)
committerEric Anholt <eric@anholt.net>
Sun, 30 Aug 2009 01:23:40 +0000 (18:23 -0700)
Use VBT information to determine which DDC bus to use for CRTDCC.
Fall back to GPIOA if VBT info is not available.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)

drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/intel_crt.c

index 11fc4b66c88941c54b6e3b0265636fc92c031edc..5b4f87e556218e0574fb3a57f3e084fbaaa7a251 100644 (file)
@@ -222,6 +222,7 @@ typedef struct drm_i915_private {
        unsigned int edp_support:1;
        int lvds_ssc_freq;
 
+       int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
        struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
        int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
        int num_fence_regs; /* 8 on pre-965, 16 otherwise */
index 300aee3296c2435545702030d6e66405759e5963..f806fcc54e09d3ad5a6e262b92530d6900a8afb6 100644 (file)
@@ -59,6 +59,16 @@ find_section(struct bdb_header *bdb, int section_id)
        return NULL;
 }
 
+static u16
+get_blocksize(void *p)
+{
+       u16 *block_ptr, block_size;
+
+       block_ptr = (u16 *)((char *)p - 2);
+       block_size = *block_ptr;
+       return block_size;
+}
+
 static void
 fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
                        struct lvds_dvo_timing *dvo_timing)
@@ -214,6 +224,41 @@ parse_general_features(struct drm_i915_private *dev_priv,
        }
 }
 
+static void
+parse_general_definitions(struct drm_i915_private *dev_priv,
+                         struct bdb_header *bdb)
+{
+       struct bdb_general_definitions *general;
+       const int crt_bus_map_table[] = {
+               GPIOB,
+               GPIOA,
+               GPIOC,
+               GPIOD,
+               GPIOE,
+               GPIOF,
+       };
+
+       /* Set sensible defaults in case we can't find the general block
+          or it is the wrong chipset */
+       dev_priv->crt_ddc_bus = -1;
+
+       general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+       if (general) {
+               u16 block_size = get_blocksize(general);
+               if (block_size >= sizeof(*general)) {
+                       int bus_pin = general->crt_ddc_gmbus_pin;
+                       DRM_DEBUG("crt_ddc_bus_pin: %d\n", bus_pin);
+                       if ((bus_pin >= 1) && (bus_pin <= 6)) {
+                               dev_priv->crt_ddc_bus =
+                                       crt_bus_map_table[bus_pin-1];
+                       }
+               } else {
+                       DRM_DEBUG("BDB_GD too small (%d). Invalid.\n",
+                                 block_size);
+               }
+       }
+}
+
 static void
 parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
                       struct bdb_header *bdb)
@@ -222,7 +267,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
        struct bdb_general_definitions *p_defs;
        struct child_device_config *p_child;
        int i, child_device_num, count;
-       u16     block_size, *block_ptr;
+       u16     block_size;
 
        p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
        if (!p_defs) {
@@ -240,8 +285,7 @@ parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
                return;
        }
        /* get the block size of general definitions */
-       block_ptr = (u16 *)((char *)p_defs - 2);
-       block_size = *block_ptr;
+       block_size = get_blocksize(p_defs);
        /* get the number of child device */
        child_device_num = (block_size - sizeof(*p_defs)) /
                                sizeof(*p_child);
@@ -362,6 +406,7 @@ intel_init_bios(struct drm_device *dev)
 
        /* Grab useful general definitions */
        parse_general_features(dev_priv, bdb);
+       parse_general_definitions(dev_priv, bdb);
        parse_lfp_panel_data(dev_priv, bdb);
        parse_sdvo_panel_data(dev_priv, bdb);
        parse_sdvo_device_mapping(dev_priv, bdb);
index d1294978a38c96ef2ced3ea29070f5722063aa3e..590f81c8f59482b6e702d8b8191211e79cd8987b 100644 (file)
@@ -508,6 +508,7 @@ void intel_crt_init(struct drm_device *dev)
 {
        struct drm_connector *connector;
        struct intel_output *intel_output;
+       struct drm_i915_private *dev_priv = dev->dev_private;
        u32 i2c_reg;
 
        intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
@@ -527,8 +528,12 @@ void intel_crt_init(struct drm_device *dev)
        /* Set up the DDC bus. */
        if (IS_IGDNG(dev))
                i2c_reg = PCH_GPIOA;
-       else
+       else {
                i2c_reg = GPIOA;
+               /* Use VBT information for CRT DDC if available */
+               if (dev_priv->crt_ddc_bus != -1)
+                       i2c_reg = dev_priv->crt_ddc_bus;
+       }
        intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
        if (!intel_output->ddc_bus) {
                dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "