ixgbe: clean up ixgbe_get_settings ethtool function
authorJacob Keller <jacob.e.keller@intel.com>
Fri, 8 Jun 2012 06:59:17 +0000 (06:59 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Wed, 20 Jun 2012 08:37:14 +0000 (01:37 -0700)
This patch cleans up the method used for determining the link speed of
devices. The old method re-wrote some logic already existing in a mac.ops
function which should be used instead. The result is much simpler to
understand and removes a strange double-check of logic, as well as reducing
code redundancy.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

index 3178f1ec371157b283dccb5f9a57af981623cafd..bbc7da5cdb4d635ab181ffa20ceda4fed6e94d9c 100644 (file)
@@ -154,100 +154,60 @@ static int ixgbe_get_settings(struct net_device *netdev,
 {
        struct ixgbe_adapter *adapter = netdev_priv(netdev);
        struct ixgbe_hw *hw = &adapter->hw;
+       ixgbe_link_speed supported_link;
        u32 link_speed = 0;
+       bool autoneg;
        bool link_up;
 
-       ecmd->supported = SUPPORTED_10000baseT_Full;
-       ecmd->autoneg = AUTONEG_ENABLE;
-       ecmd->transceiver = XCVR_EXTERNAL;
-       if ((hw->phy.media_type == ixgbe_media_type_copper) ||
-           (hw->phy.multispeed_fiber)) {
-               ecmd->supported |= (SUPPORTED_1000baseT_Full |
-                                   SUPPORTED_Autoneg);
-
-               switch (hw->mac.type) {
-               case ixgbe_mac_X540:
-                       ecmd->supported |= SUPPORTED_100baseT_Full;
-                       break;
-               default:
-                       break;
-               }
-
-               ecmd->advertising = ADVERTISED_Autoneg;
-               if (hw->phy.autoneg_advertised) {
-                       if (hw->phy.autoneg_advertised &
-                           IXGBE_LINK_SPEED_100_FULL)
-                               ecmd->advertising |= ADVERTISED_100baseT_Full;
-                       if (hw->phy.autoneg_advertised &
-                           IXGBE_LINK_SPEED_10GB_FULL)
-                               ecmd->advertising |= ADVERTISED_10000baseT_Full;
-                       if (hw->phy.autoneg_advertised &
-                           IXGBE_LINK_SPEED_1GB_FULL)
-                               ecmd->advertising |= ADVERTISED_1000baseT_Full;
-               } else {
-                       /*
-                        * Default advertised modes in case
-                        * phy.autoneg_advertised isn't set.
-                        */
-                       ecmd->advertising |= (ADVERTISED_10000baseT_Full |
-                                             ADVERTISED_1000baseT_Full);
-                       if (hw->mac.type == ixgbe_mac_X540)
-                               ecmd->advertising |= ADVERTISED_100baseT_Full;
-               }
-
-               if (hw->phy.media_type == ixgbe_media_type_copper) {
-                       ecmd->supported |= SUPPORTED_TP;
-                       ecmd->advertising |= ADVERTISED_TP;
-                       ecmd->port = PORT_TP;
-               } else {
-                       ecmd->supported |= SUPPORTED_FIBRE;
-                       ecmd->advertising |= ADVERTISED_FIBRE;
-                       ecmd->port = PORT_FIBRE;
-               }
-       } else if (hw->phy.media_type == ixgbe_media_type_backplane) {
-               /* Set as FIBRE until SERDES defined in kernel */
-               if (hw->device_id == IXGBE_DEV_ID_82598_BX) {
-                       ecmd->supported = (SUPPORTED_1000baseT_Full |
-                                          SUPPORTED_FIBRE);
-                       ecmd->advertising = (ADVERTISED_1000baseT_Full |
-                                            ADVERTISED_FIBRE);
-                       ecmd->port = PORT_FIBRE;
-                       ecmd->autoneg = AUTONEG_DISABLE;
-               } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) ||
-                          (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) {
-                       ecmd->supported |= (SUPPORTED_1000baseT_Full |
-                                           SUPPORTED_Autoneg |
-                                           SUPPORTED_FIBRE);
-                       ecmd->advertising = (ADVERTISED_10000baseT_Full |
-                                            ADVERTISED_1000baseT_Full |
-                                            ADVERTISED_Autoneg |
-                                            ADVERTISED_FIBRE);
-                       ecmd->port = PORT_FIBRE;
-               } else {
-                       ecmd->supported |= (SUPPORTED_1000baseT_Full |
-                                           SUPPORTED_FIBRE);
-                       ecmd->advertising = (ADVERTISED_10000baseT_Full |
-                                            ADVERTISED_1000baseT_Full |
-                                            ADVERTISED_FIBRE);
-                       ecmd->port = PORT_FIBRE;
-               }
+       hw->mac.ops.get_link_capabilities(hw, &supported_link, &autoneg);
+
+       /* set the supported link speeds */
+       if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
+               ecmd->supported |= SUPPORTED_10000baseT_Full;
+       if (supported_link & IXGBE_LINK_SPEED_1GB_FULL)
+               ecmd->supported |= SUPPORTED_1000baseT_Full;
+       if (supported_link & IXGBE_LINK_SPEED_100_FULL)
+               ecmd->supported |= SUPPORTED_100baseT_Full;
+
+       /* set the advertised speeds */
+       if (hw->phy.autoneg_advertised) {
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+                       ecmd->advertising |= ADVERTISED_100baseT_Full;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+                       ecmd->advertising |= ADVERTISED_10000baseT_Full;
+               if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+                       ecmd->advertising |= ADVERTISED_1000baseT_Full;
        } else {
-               ecmd->supported |= SUPPORTED_FIBRE;
-               ecmd->advertising = (ADVERTISED_10000baseT_Full |
-                                    ADVERTISED_FIBRE);
-               ecmd->port = PORT_FIBRE;
-               ecmd->autoneg = AUTONEG_DISABLE;
+               /* default modes in case phy.autoneg_advertised isn't set */
+               if (supported_link & IXGBE_LINK_SPEED_10GB_FULL)
+                       ecmd->advertising |= ADVERTISED_10000baseT_Full;
+               if (supported_link & IXGBE_LINK_SPEED_1GB_FULL)
+                       ecmd->advertising |= ADVERTISED_1000baseT_Full;
+               if (supported_link & IXGBE_LINK_SPEED_100_FULL)
+                       ecmd->advertising |= ADVERTISED_100baseT_Full;
        }
 
-       /* Get PHY type */
+       if (autoneg) {
+               ecmd->supported |= SUPPORTED_Autoneg;
+               ecmd->advertising |= ADVERTISED_Autoneg;
+               ecmd->autoneg = AUTONEG_ENABLE;
+       } else
+               ecmd->autoneg = AUTONEG_DISABLE;
+
+       ecmd->transceiver = XCVR_EXTERNAL;
+
+       /* Determine the remaining settings based on the PHY type. */
        switch (adapter->hw.phy.type) {
        case ixgbe_phy_tn:
        case ixgbe_phy_aq:
        case ixgbe_phy_cu_unknown:
-               /* Copper 10G-BASET */
+               ecmd->supported |= SUPPORTED_TP;
+               ecmd->advertising |= ADVERTISED_TP;
                ecmd->port = PORT_TP;
                break;
        case ixgbe_phy_qt:
+               ecmd->supported |= SUPPORTED_FIBRE;
+               ecmd->advertising |= ADVERTISED_FIBRE;
                ecmd->port = PORT_FIBRE;
                break;
        case ixgbe_phy_nl:
@@ -257,42 +217,59 @@ static int ixgbe_get_settings(struct net_device *netdev,
        case ixgbe_phy_sfp_avago:
        case ixgbe_phy_sfp_intel:
        case ixgbe_phy_sfp_unknown:
-               switch (adapter->hw.phy.sfp_type) {
                /* SFP+ devices, further checking needed */
+               switch (adapter->hw.phy.sfp_type) {
                case ixgbe_sfp_type_da_cu:
                case ixgbe_sfp_type_da_cu_core0:
                case ixgbe_sfp_type_da_cu_core1:
+                       ecmd->supported |= SUPPORTED_FIBRE;
+                       ecmd->advertising |= ADVERTISED_FIBRE;
                        ecmd->port = PORT_DA;
                        break;
                case ixgbe_sfp_type_sr:
                case ixgbe_sfp_type_lr:
                case ixgbe_sfp_type_srlr_core0:
                case ixgbe_sfp_type_srlr_core1:
+                       ecmd->supported |= SUPPORTED_FIBRE;
+                       ecmd->advertising |= ADVERTISED_FIBRE;
                        ecmd->port = PORT_FIBRE;
                        break;
                case ixgbe_sfp_type_not_present:
+                       ecmd->supported |= SUPPORTED_FIBRE;
+                       ecmd->advertising |= ADVERTISED_FIBRE;
                        ecmd->port = PORT_NONE;
                        break;
                case ixgbe_sfp_type_1g_cu_core0:
                case ixgbe_sfp_type_1g_cu_core1:
+                       ecmd->supported |= SUPPORTED_TP;
+                       ecmd->advertising |= ADVERTISED_TP;
                        ecmd->port = PORT_TP;
-                       ecmd->supported = SUPPORTED_TP;
-                       ecmd->advertising = (ADVERTISED_1000baseT_Full |
-                                            ADVERTISED_TP);
+                       break;
+               case ixgbe_sfp_type_1g_sx_core0:
+               case ixgbe_sfp_type_1g_sx_core1:
+                       ecmd->supported |= SUPPORTED_FIBRE;
+                       ecmd->advertising |= ADVERTISED_FIBRE;
+                       ecmd->port = PORT_FIBRE;
                        break;
                case ixgbe_sfp_type_unknown:
                default:
+                       ecmd->supported |= SUPPORTED_FIBRE;
+                       ecmd->advertising |= ADVERTISED_FIBRE;
                        ecmd->port = PORT_OTHER;
                        break;
                }
                break;
        case ixgbe_phy_xaui:
+               ecmd->supported |= SUPPORTED_FIBRE;
+               ecmd->advertising |= ADVERTISED_FIBRE;
                ecmd->port = PORT_NONE;
                break;
        case ixgbe_phy_unknown:
        case ixgbe_phy_generic:
        case ixgbe_phy_sfp_unsupported:
        default:
+               ecmd->supported |= SUPPORTED_FIBRE;
+               ecmd->advertising |= ADVERTISED_FIBRE;
                ecmd->port = PORT_OTHER;
                break;
        }