omap4: board-4430sdp: Initialise the serial pads

Use the mux framework to initialise the serial pads.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 85805d432e38b311c439e99f44b26aa24184a2b9..670cbd567bf3e71a644200b9764e2c3260feb25c 100644 (file)
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -625,9 +625,76 @@ static struct omap_board_mux board_mux[] __initdata = {
        OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
        { .reg_offset = OMAP_MUX_TERMINATOR },
 };
+
+static struct omap_device_pad serial2_pads[] __initdata = {
+       OMAP_MUX_STATIC("uart2_cts.uart2_cts",
+                        OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+       OMAP_MUX_STATIC("uart2_rts.uart2_rts",
+                        OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+       OMAP_MUX_STATIC("uart2_rx.uart2_rx",
+                        OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+       OMAP_MUX_STATIC("uart2_tx.uart2_tx",
+                        OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial3_pads[] __initdata = {
+       OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
+                        OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+       OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
+                        OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+       OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
+                        OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+       OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
+                        OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial4_pads[] __initdata = {
+       OMAP_MUX_STATIC("uart4_rx.uart4_rx",
+                        OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+       OMAP_MUX_STATIC("uart4_tx.uart4_tx",
+                        OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_board_data serial2_data = {
+       .id             = 1,
+       .pads           = serial2_pads,
+       .pads_cnt       = ARRAY_SIZE(serial2_pads),
+};
+
+static struct omap_board_data serial3_data = {
+       .id             = 2,
+       .pads           = serial3_pads,
+       .pads_cnt       = ARRAY_SIZE(serial3_pads),
+};
+
+static struct omap_board_data serial4_data = {
+       .id             = 3,
+       .pads           = serial4_pads,
+       .pads_cnt       = ARRAY_SIZE(serial4_pads),
+};
+
+static inline void board_serial_init(void)
+{
+       struct omap_board_data bdata;
+       bdata.flags     = 0;
+       bdata.pads      = NULL;
+       bdata.pads_cnt  = 0;
+       bdata.id        = 0;
+       /* pass dummy data for UART1 */
+       omap_serial_init_port(&bdata);
+
+       omap_serial_init_port(&serial2_data);
+       omap_serial_init_port(&serial3_data);
+       omap_serial_init_port(&serial4_data);
+}
 #else
 #define board_mux      NULL
-#endif
+
+static inline void board_serial_init(void)
+{
+       omap_serial_init();
+}
+ #endif
 
 static void __init omap_4430sdp_init(void)
 {
@@ -644,7 +711,7 @@ static void __init omap_4430sdp_init(void)
        omap4_i2c_init();
        omap_sfh7741prox_init();
        platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-       omap_serial_init();
+       board_serial_init();
        omap4_twl6030_hsmmc_init(mmc);
 
        usb_musb_init(&musb_board_data);