Add a drm_sysfs_connector_remove call when we destroy the panel to make
sure the connector node in sysfs gets deleted.
This is required for proper unload and re-load of this driver as a
module. Without this, we would get a warning at re-load time like so:
tda998x 0-0070: found TDA19988
------------[ cut here ]------------
WARNING: CPU: 0 PID: 825 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74()
sysfs: cannot create duplicate filename '/class/drm/card0-HDMI-A-1'
Modules linked in: [..]
CPU: 0 PID: 825 Comm: modprobe Not tainted
3.15.0-rc4-00027-g9dcdef4 #82
[<
c0013bb8>] (unwind_backtrace) from [<
c0011824>] (show_stack+0x10/0x14)
[<
c0011824>] (show_stack) from [<
c0034e8c>] (warn_slowpath_common+0x68/0x88)
[<
c0034e8c>] (warn_slowpath_common) from [<
c0034edc>] (warn_slowpath_fmt+0x30/0x40)
[<
c0034edc>] (warn_slowpath_fmt) from [<
c01243f4>] (sysfs_warn_dup+0x54/0x74)
[<
c01243f4>] (sysfs_warn_dup) from [<
c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8)
[<
c0124708>] (sysfs_do_create_link_sd.isra.2) from [<
c02ae37c>] (device_add+0x338/0x520)
[<
c02ae37c>] (device_add) from [<
c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4)
[<
c02ae6e8>] (device_create_groups_vargs) from [<
c02ae758>] (device_create+0x24/0x2c)
[<
c02ae758>] (device_create) from [<
c029b4ec>] (drm_sysfs_connector_add+0x64/0x204)
[<
c029b4ec>] (drm_sysfs_connector_add) from [<
bf0b1b40>] (slave_modeset_init+0x120/0x1bc [tilcdc])
[<
bf0b1b40>] (slave_modeset_init [tilcdc]) from [<
bf0b2be8>] (tilcdc_load+0x214/0x4c0 [tilcdc])
[<
bf0b2be8>] (tilcdc_load [tilcdc]) from [<
c029955c>] (drm_dev_register+0xa4/0x104)
[..snip..]
---[ end trace
4df8d614936ebdee ]---
[drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Tested-by: Darren Etheridge <detheridge@ti.com>
Cc: <stable@vger.kernel.org> #v3.9+
Signed-off-by: Dave Airlie <airlied@redhat.com>