drm/i915/bxt: Sanitize DC state tracking during system resume
authorImre Deak <imre.deak@intel.com>
Wed, 20 Apr 2016 17:27:56 +0000 (20:27 +0300)
committerImre Deak <imre.deak@intel.com>
Fri, 22 Apr 2016 12:12:04 +0000 (15:12 +0300)
After suspend-to-ram or -disk we don't know what power state the display
HW will be, DC0 or DC9 are both possible states, so reset the software
DC state tracking in these cases. This gets rid of 'DC state mismatch'
error messages during resuming from ram or disk where we expected to be
in DC9 (as set by the suspend handler) but we are in DC0.

v2:
- Remove extra WS in gen9_sanitize_dc_state() (Bob)

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1461173277-16090-4-git-send-email-imre.deak@intel.com
drivers/gpu/drm/i915/i915_drv.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_runtime_pm.c

index 2d0efd312b8203227a64fb45206a5d05d67a8374..a0f8913a76f88e50136d8579d56f24e56d0cf767 100644 (file)
@@ -867,10 +867,13 @@ static int i915_drm_resume_early(struct drm_device *dev)
 
        intel_uncore_early_sanitize(dev, true);
 
-       if (IS_BROXTON(dev))
+       if (IS_BROXTON(dev)) {
+               if (!dev_priv->suspended_to_idle)
+                       gen9_sanitize_dc_state(dev_priv);
                bxt_disable_dc9(dev_priv);
-       else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+       } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
                hsw_disable_pc8(dev_priv);
+       }
 
        intel_uncore_sanitize(dev);
 
index beed9e81252b0c445c87ebe11a981d5f895da129..5464632d466cdf9f2ba0ee04237002b0440aef17 100644 (file)
@@ -1235,6 +1235,7 @@ bool broxton_cdclk_verify_state(struct drm_i915_private *dev_priv);
 void broxton_ddi_phy_init(struct drm_i915_private *dev_priv);
 void broxton_ddi_phy_uninit(struct drm_i915_private *dev_priv);
 void broxton_ddi_phy_verify_state(struct drm_i915_private *dev_priv);
+void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv);
 void bxt_enable_dc9(struct drm_i915_private *dev_priv);
 void bxt_disable_dc9(struct drm_i915_private *dev_priv);
 void skl_init_cdclk(struct drm_i915_private *dev_priv);
index 900038369ec1e4dfc4198c55e4d5c6eacc00e4b2..8fff0800b4ed5332f38f71e0263f901e4786cda4 100644 (file)
@@ -492,10 +492,9 @@ static void gen9_write_dc_state(struct drm_i915_private *dev_priv,
                              state, rewrites);
 }
 
-static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
+static u32 gen9_dc_mask(struct drm_i915_private *dev_priv)
 {
-       uint32_t val;
-       uint32_t mask;
+       u32 mask;
 
        mask = DC_STATE_EN_UPTO_DC5;
        if (IS_BROXTON(dev_priv))
@@ -503,10 +502,30 @@ static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
        else
                mask |= DC_STATE_EN_UPTO_DC6;
 
+       return mask;
+}
+
+void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv)
+{
+       u32 val;
+
+       val = I915_READ(DC_STATE_EN) & gen9_dc_mask(dev_priv);
+
+       DRM_DEBUG_KMS("Resetting DC state tracking from %02x to %02x\n",
+                     dev_priv->csr.dc_state, val);
+       dev_priv->csr.dc_state = val;
+}
+
+static void gen9_set_dc_state(struct drm_i915_private *dev_priv, uint32_t state)
+{
+       uint32_t val;
+       uint32_t mask;
+
        if (WARN_ON_ONCE(state & ~dev_priv->csr.allowed_dc_mask))
                state &= dev_priv->csr.allowed_dc_mask;
 
        val = I915_READ(DC_STATE_EN);
+       mask = gen9_dc_mask(dev_priv);
        DRM_DEBUG_KMS("Setting DC state from %02x to %02x\n",
                      val & mask, state);