ieee1394: ohci1394: suspend/resume cosmetics
authorStefan Richter <stefanr@s5r6.in-berlin.de>
Sun, 24 Sep 2006 09:01:00 +0000 (11:01 +0200)
committerStefan Richter <stefanr@s5r6.in-berlin.de>
Thu, 7 Dec 2006 20:28:40 +0000 (21:28 +0100)
Reorder the definitions of ohci1394_pci_suspend and _resume.  Remove
redundant comments.  Beautify return statements.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
drivers/ieee1394/ohci1394.c

index b98b9934b92d9f9add17863c96a8efa7812c3486..a12802553b4bae5f4caa5955b98551b6c9e0a592 100644 (file)
@@ -3529,108 +3529,40 @@ static void ohci1394_pci_remove(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_PM
-static int ohci1394_pci_resume (struct pci_dev *pdev)
+static int ohci1394_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 {
        int err;
-       struct ti_ohci *ohci;
-
-/* PowerMac resume code comes first */
-#ifdef CONFIG_PPC_PMAC
-       if (machine_is(powermac)) {
-               struct device_node *of_node;
-
-               /* Re-enable 1394 */
-               of_node = pci_device_to_OF_node (pdev);
-               if (of_node)
-                       pmac_call_feature (PMAC_FTR_1394_ENABLE, of_node, 0, 1);
-       }
-#endif /* CONFIG_PPC_PMAC */
-
-       pci_set_power_state(pdev, PCI_D0);
-       pci_restore_state(pdev);
-       err = pci_enable_device(pdev);
-       if (err)
-               return err;
-
-       ohci = pci_get_drvdata(pdev);
-       if (!ohci)
-               return -1; /* or which exit status to use? */
-
-       PRINT(KERN_DEBUG, "resume called");
-
-       /* The following lines are copied from ohci1394_pci_probe(): */
-
-       /* Start off with a soft reset, to clear everything to a sane
-        * state. */
-       ohci_soft_reset(ohci);
-
-       /* Now enable LPS, which we need in order to start accessing
-        * most of the registers.  In fact, on some cards (ALI M5251),
-        * accessing registers in the SClk domain without LPS enabled
-        * will lock up the machine.  Wait 50msec to make sure we have
-        * full link enabled.  */
-       reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
-
-       /* Disable and clear interrupts */
-       reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
-       reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
-
-       mdelay(50);
-
-       ohci_initialize(ohci);
-
-       return 0;
-}
-
-static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
-{
-       int err;
-       struct ti_ohci *ohci;
-
-       ohci = pci_get_drvdata(pdev);
-       if (!ohci)
-               return -1; /* Not sure if this is the correct return code */
+       struct ti_ohci *ohci = pci_get_drvdata(pdev);
 
        PRINT(KERN_DEBUG, "suspend called");
+       if (!ohci)
+               return -ENXIO;
 
-       /* clear the async DMA contexts and stop using the controller: */
+       /* Clear the async DMA contexts and stop using the controller */
        hpsb_bus_reset(ohci->host);
 
-       /* The following calls are from ohci1394_pci_remove(): */
-
-       /* Clear out BUS Options */
+       /* See ohci1394_pci_remove() for comments on this sequence */
        reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
        reg_write(ohci, OHCI1394_BusOptions,
                  (reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) |
                  0x00ff0000);
-
-       /* Clear interrupt registers */
        reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
        reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
        reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
        reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
        reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
        reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
-
-       /* Disable IRM Contender */
        set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4));
-
-       /* Clear link control register */
        reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
-
-       /* Let all other nodes know to ignore us */
        ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT);
-
-       /* This stops all DMA contexts, disables interrupts,
-        * and clears linkEnable and LPS: */
        ohci_soft_reset(ohci);
 
        err = pci_save_state(pdev);
        if (err)
-               goto out;
+               return err;
        err = pci_set_power_state(pdev, pci_choose_state(pdev, state));
        if (err)
-               goto out;
+               return err;
 
 /* PowerMac suspend code comes last */
 #ifdef CONFIG_PPC_PMAC
@@ -3643,8 +3575,46 @@ static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
                        pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0);
        }
 #endif /* CONFIG_PPC_PMAC */
-out:
-       return err;
+
+       return 0;
+}
+
+static int ohci1394_pci_resume(struct pci_dev *pdev)
+{
+       int err;
+       struct ti_ohci *ohci = pci_get_drvdata(pdev);
+
+       PRINT(KERN_DEBUG, "resume called");
+       if (!ohci)
+               return -ENXIO;
+
+/* PowerMac resume code comes first */
+#ifdef CONFIG_PPC_PMAC
+       if (machine_is(powermac)) {
+               struct device_node *of_node;
+
+               /* Re-enable 1394 */
+               of_node = pci_device_to_OF_node (pdev);
+               if (of_node)
+                       pmac_call_feature (PMAC_FTR_1394_ENABLE, of_node, 0, 1);
+       }
+#endif /* CONFIG_PPC_PMAC */
+
+       pci_set_power_state(pdev, PCI_D0);
+       pci_restore_state(pdev);
+       err = pci_enable_device(pdev);
+       if (err)
+               return err;
+
+       /* See ohci1394_pci_probe() for comments on this sequence */
+       ohci_soft_reset(ohci);
+       reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
+       reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
+       reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
+       mdelay(50);
+       ohci_initialize(ohci);
+
+       return 0;
 }
 #endif /* CONFIG_PM */