USB: cxacru: create sysfs attributes in atm_start instead of bind
authorSimon Arlott <simon@fire.lp0.eu>
Fri, 11 May 2007 06:04:12 +0000 (23:04 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 8 Jun 2007 23:24:31 +0000 (16:24 -0700)
Since usbatm doesn't set the usb_interface driver data until after calling
bind and heavy_init, it would be NULL when the sysfs attributes are read.
Reading the MAC address from atm_dev before atm_dev exists would have been
be possible too.

Calling create_device_file in atm_start will avoid this problem, and the
data is useless until the first status poll runs.  However, it must be
ready before a status poll does a printk on line status change otherwise
userspace could react before the files exist.

For completeness I've moved remove_device_file to atm_stop so it's not
called in unbind when it's not needed.  There's no point starting ADSL if
atm_start could still fail either.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: Duncan Sands <duncan.sands@math.u-psud.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/atm/cxacru.c

index 30b7bfbc985a752065b62770c9e52aa0f5cde8f8..68cf582fd4fa43fdf4a64bdd0ca6b55f506844b0 100644 (file)
@@ -629,10 +629,22 @@ static int cxacru_card_status(struct cxacru_data *instance)
        return 0;
 }
 
+static void cxacru_remove_device_files(struct usbatm_data *usbatm_instance,
+               struct atm_dev *atm_dev)
+{
+       struct usb_interface *intf = usbatm_instance->usb_intf;
+
+       #define CXACRU_DEVICE_REMOVE_FILE(_name) \
+               device_remove_file(&intf->dev, &dev_attr_##_name);
+       CXACRU_ALL_FILES(REMOVE);
+       #undef CXACRU_DEVICE_REMOVE_FILE
+}
+
 static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
                struct atm_dev *atm_dev)
 {
        struct cxacru_data *instance = usbatm_instance->driver_data;
+       struct usb_interface *intf = usbatm_instance->usb_intf;
        /*
        struct atm_dev *atm_dev = usbatm_instance->atm_dev;
        */
@@ -649,6 +661,13 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
                return ret;
        }
 
+       #define CXACRU_DEVICE_CREATE_FILE(_name) \
+               ret = device_create_file(&intf->dev, &dev_attr_##_name); \
+               if (unlikely(ret)) \
+                       goto fail_sysfs;
+       CXACRU_ALL_FILES(CREATE);
+       #undef CXACRU_DEVICE_CREATE_FILE
+
        /* start ADSL */
        mutex_lock(&instance->adsl_state_serialize);
        ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
@@ -680,6 +699,11 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
        if (start_polling)
                cxacru_poll_status(&instance->poll_work.work);
        return 0;
+
+fail_sysfs:
+       usb_err(usbatm_instance, "cxacru_atm_start: device_create_file failed (%d)\n", ret);
+       cxacru_remove_device_files(usbatm_instance, atm_dev);
+       return ret;
 }
 
 static void cxacru_poll_status(struct work_struct *work)
@@ -1065,13 +1089,6 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
                goto fail;
        }
 
-       #define CXACRU_DEVICE_CREATE_FILE(_name) \
-               ret = device_create_file(&intf->dev, &dev_attr_##_name); \
-               if (unlikely(ret)) \
-                       goto fail_sysfs;
-       CXACRU_ALL_FILES(CREATE);
-       #undef CXACRU_DEVICE_CREATE_FILE
-
        usb_fill_int_urb(instance->rcv_urb,
                        usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
                        instance->rcv_buf, PAGE_SIZE,
@@ -1092,14 +1109,6 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
 
        return 0;
 
- fail_sysfs:
-       dbg("cxacru_bind: device_create_file failed (%d)\n", ret);
-
-       #define CXACRU_DEVICE_REMOVE_FILE(_name) \
-               device_remove_file(&intf->dev, &dev_attr_##_name);
-       CXACRU_ALL_FILES(REMOVE);
-       #undef CXACRU_DEVICE_REVOVE_FILE
-
  fail:
        free_page((unsigned long) instance->snd_buf);
        free_page((unsigned long) instance->rcv_buf);
@@ -1146,11 +1155,6 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
        free_page((unsigned long) instance->snd_buf);
        free_page((unsigned long) instance->rcv_buf);
 
-       #define CXACRU_DEVICE_REMOVE_FILE(_name) \
-               device_remove_file(&intf->dev, &dev_attr_##_name);
-       CXACRU_ALL_FILES(REMOVE);
-       #undef CXACRU_DEVICE_REVOVE_FILE
-
        kfree(instance);
 
        usbatm_instance->driver_data = NULL;
@@ -1231,6 +1235,7 @@ static struct usbatm_driver cxacru_driver = {
        .heavy_init     = cxacru_heavy_init,
        .unbind         = cxacru_unbind,
        .atm_start      = cxacru_atm_start,
+       .atm_stop       = cxacru_remove_device_files,
        .bulk_in        = CXACRU_EP_DATA,
        .bulk_out       = CXACRU_EP_DATA,
        .rx_padding     = 3,