sh: Add SH-5 support to io.h.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
index 6ed34d8eac5f48026088535adcd931a053a2d609..556aabe844c56a642afa7b9b04900e8147ef546f 100644 (file)
--- a/include/asm-sh/io.h
+++ b/include/asm-sh/io.h
@@ -243,12 +243,20 @@ static inline void ctrl_outl(unsigned int b, unsigned long addr)
 
 static inline void ctrl_delay(void)
 {
+#ifdef P2SEG
        ctrl_inw(P2SEG);
+#endif
 }
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-#ifdef CONFIG_MMU
+#if !defined(CONFIG_MMU)
+#define virt_to_phys(address)  ((unsigned long)(address))
+#define phys_to_virt(address)  ((void *)(address))
+#elif defined(CONFIG_SUPERH64)
+#define virt_to_phys(address)  (__pa(address))
+#define phys_to_virt(address)  (__va(address))
+#else
 /*
  * Change virtual addresses to physical addresses and vv.
  * These are trivial on the 1:1 Linux/SuperH mapping
@@ -262,28 +270,24 @@ static inline void *phys_to_virt(unsigned long address)
 {
        return (void *)P1SEGADDR(address);
 }
-#else
-#define phys_to_virt(address)  ((void *)(address))
-#define virt_to_phys(address)  ((unsigned long)(address))
 #endif
 
 /*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the x86 architecture, we just read/write the
- * memory location directly.
+ * On 32-bit SH, we traditionally have the whole physical address space
+ * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do
+ * not need to do anything but place the address in the proper segment.
+ * This is true for P1 and P2 addresses, as well as some P3 ones.
+ * However, most of the P3 addresses and newer cores using extended
+ * addressing need to map through page tables, so the ioremap()
+ * implementation becomes a bit more complicated.
  *
- * On SH, we traditionally have the whole physical address space mapped
- * at all times (as MIPS does), so "ioremap()" and "iounmap()" do not
- * need to do anything but place the address in the proper segment. This
- * is true for P1 and P2 addresses, as well as some P3 ones. However,
- * most of the P3 addresses and newer cores using extended addressing
- * need to map through page tables, so the ioremap() implementation
- * becomes a bit more complicated. See arch/sh/mm/ioremap.c for
- * additional notes on this.
+ * See arch/sh/mm/ioremap.c for additional notes on this.
  *
  * We cheat a bit and always return uncachable areas until we've fixed
  * the drivers to handle caching properly.
+ *
+ * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply
+ * doesn't exist, so everything must go through page tables.
  */
 #ifdef CONFIG_MMU
 void __iomem *__ioremap(unsigned long offset, unsigned long size,
@@ -297,6 +301,7 @@ void __iounmap(void __iomem *addr);
 static inline void __iomem *
 __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 {
+#ifdef CONFIG_SUPERH32
        unsigned long last_addr = offset + size - 1;
 
        /*
@@ -311,6 +316,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 
                return (void __iomem *)P2SEGADDR(offset);
        }
+#endif
 
        return __ioremap(offset, size, flags);
 }