ARM: dts: armada-388-clearfog: number LAN ports properly

Currently, the ports as seen from the rear number as:

	eth0 sfp lan5 lan4 lan3 lan2 lan1 lan6

which is illogical - this came about because the rev 2.0 boards have the
LEDs on the front for the DSA switch (lan5-1) reversed.  Rev 2.1 boards
fixed the LED issue, and the Clearfog case numbers the lan ports
increasing from left to right.

Maintaining this illogical numbering causes confusion, with reports that
"my link isn't coming up" and "my connection negotiates 10base-Half"
both of which are due to people thinking that the port next to the SFP
is lan1.

Fix this by renumbering the ports to match people's expectations.

[gregory.clement@free-electrons.com: added the Fixes and stable tags]

Fixes: 4c945e8556ec ("ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT
file")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 2e0556af6e5eef508fe29f7ec9cdc91452253455..d3e6bd80500619ab87267ae334a084c8778554ad 100644 (file)
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -390,12 +390,12 @@
 
                        port@0 {
                                reg = <0>;
-                               label = "lan1";
+                               label = "lan5";
                        };
 
                        port@1 {
                                reg = <1>;
-                               label = "lan2";
+                               label = "lan4";
                        };
 
                        port@2 {
@@ -405,12 +405,12 @@
 
                        port@3 {
                                reg = <3>;
-                               label = "lan4";
+                               label = "lan2";
                        };
 
                        port@4 {
                                reg = <4>;
-                               label = "lan5";
+                               label = "lan1";
                        };
 
                        port@5 {