#define DOCK_FILENAME "emu/audio_dock.fw"
#define EMU1010B_FILENAME "emu/emu1010b.fw"
#define MICRO_DOCK_FILENAME "emu/micro_dock.fw"
+#define EMU1010_NOTEBOOK_FILENAME "emu/emu1010_notebook.fw"
MODULE_FIRMWARE(HANA_FILENAME);
MODULE_FIRMWARE(DOCK_FILENAME);
MODULE_FIRMWARE(EMU1010B_FILENAME);
MODULE_FIRMWARE(MICRO_DOCK_FILENAME);
+MODULE_FIRMWARE(EMU1010_NOTEBOOK_FILENAME);
/*************************************************************************
/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
snd_printdd("reg1=0x%x\n",reg);
- if ((reg & 0x1f) == 0x15) {
+ if ((reg & 0x3f) == 0x15) {
/* FPGA netlist already present so clear it */
/* Return to programming mode */
}
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
snd_printdd("reg2=0x%x\n",reg);
- if ((reg & 0x1f) == 0x15) {
+ if ((reg & 0x3f) == 0x15) {
/* FPGA failed to return to programming mode */
+ snd_printk(KERN_INFO "emu1010: FPGA failed to return to programming mode\n");
return -ENODEV;
}
snd_printk(KERN_INFO "emu1010: EMU_HANA_ID=0x%x\n",reg);
snd_printk(KERN_INFO "emu1010: Loading Firmware file %s failed\n", EMU1010B_FILENAME);
return err;
}
+ } else if (emu->card_capabilities->emu1010 == 3) {
+ if ((err = snd_emu1010_load_firmware(emu, EMU1010_NOTEBOOK_FILENAME)) != 0) {
+ snd_printk(KERN_INFO "emu1010: Loading Firmware file %s failed\n", EMU1010_NOTEBOOK_FILENAME);
+ return err;
+ }
}
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
- if ((reg & 0x1f) != 0x15) {
+ if ((reg & 0x3f) != 0x15) {
/* FPGA failed to be programmed */
snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg=0x%x\n", reg);
return -ENODEV;
if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
return err;
}
+ } else if (emu->card_capabilities->emu1010 == 3) {
+ if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
+ return err;
+ }
}
snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0 );
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID=0x%x\n",reg);
- if ((reg & 0x1f) != 0x15) {
+ if ((reg & 0x3f) != 0x15) {
/* FPGA failed to be programmed */
snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg=0x%x\n", reg);
return 0;
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ca_cardbus_chip = 1,
- .spi_dac = 1,
- .i2c_adc = 1,
- .spk71 = 1} ,
+ .spk71 = 1 ,
+ .emu1010 = 3} ,
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102,
.driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM????]",
.id = "EMU1010",
emu->fx8010.extout_mask = extout_mask;
emu->enable_ir = enable_ir;
+ if (emu->card_capabilities->ca_cardbus_chip) {
+ if ((err = snd_emu10k1_cardbus_init(emu)) < 0)
+ goto error;
+ }
if (emu->card_capabilities->ecard) {
if ((err = snd_emu10k1_ecard_init(emu)) < 0)
goto error;
- } else if (emu->card_capabilities->ca_cardbus_chip) {
- if ((err = snd_emu10k1_cardbus_init(emu)) < 0)
- goto error;
} else if (emu->card_capabilities->emu1010) {
if ((err = snd_emu10k1_emu1010_init(emu)) < 0) {
snd_emu10k1_free(emu);
void snd_emu10k1_resume_init(struct snd_emu10k1 *emu)
{
+ if (emu->card_capabilities->ca_cardbus_chip)
+ snd_emu10k1_cardbus_init(emu);
if (emu->card_capabilities->ecard)
snd_emu10k1_ecard_init(emu);
- else if (emu->card_capabilities->ca_cardbus_chip)
- snd_emu10k1_cardbus_init(emu);
else if (emu->card_capabilities->emu1010)
snd_emu10k1_emu1010_init(emu);
else