#include <media/saa7115.h>
#include <asm/div64.h>
+#define HRES_60HZ (480+16)
+
MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver");
MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, "
"Hans Verkuil, Mauro Carvalho Chehab");
int contrast;
int hue;
int sat;
+ int width;
+ int height;
enum v4l2_chip_ident ident;
u32 audclk_freq;
u32 crystal_freq;
/* Sanity routine to check if a register is present */
static int saa711x_has_reg(const int id, const u8 reg)
{
+ if (id == V4L2_IDENT_SAA7111)
+ return reg < 0x20 && reg != 0x01 && reg != 0x0f &&
+ (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e;
+
+ /* common for saa7113/4/5/8 */
+ if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f ||
+ reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) ||
+ reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) ||
+ reg == 0x82 || (reg >= 0x89 && reg <= 0x8e)))
+ return 0;
+
switch (id) {
- case V4L2_IDENT_SAA7111:
- if (reg>0x1f || reg==1 || reg==0x0f || reg==0x14 || reg==0x18
- || reg==0x19 || reg==0x1d || reg==0x1e)
- return 0;
- break;
case V4L2_IDENT_SAA7113:
- if (reg>0x62 || reg==0x14 || (reg>=0x18 && reg<=0x1e) ||
- (reg>=0x20 && reg<=0x3f) ||reg==0x5f )
- return 0;
- break;
+ return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) &&
+ reg != 0x5d && reg < 0x63;
case V4L2_IDENT_SAA7114:
- if (reg>=0xf0 || (reg>=0x1a && reg<=0x1e) ||
- (reg>=0x20 && reg<=0x2f) ||
- (reg>=0x63 && reg<=0x7f) )
- return 0;
- break;
+ return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) &&
+ (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 &&
+ reg != 0x81 && reg < 0xf0;
case V4L2_IDENT_SAA7115:
- if ((reg>=0x20 && reg<=0x2f) || (reg==0x5c) ||
- (reg>=0xfc && reg<=0xfe) )
- return 0;
- break;
+ return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe);
case V4L2_IDENT_SAA7118:
- if (reg>=0xf0 || (reg>=0x1a && reg<=0x1d) ||
- (reg>=0x63 && reg<=0x6f) )
- return 0;
+ return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) &&
+ (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 &&
+ (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0;
}
-
- /* Those registers are reserved for all family */
- if (unlikely((reg>=0x20 && reg<=0x22) ||
- (reg>=0x26 && reg<=0x28) ||
- (reg>=0x3b && reg<=0x3f) || (reg==0x5f) ||
- (reg>=0x63 && reg<=0x6f) ) )
- return 0;
return 1;
}
R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */
R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */
+
+ R_80_GLOBAL_CNTL_1, 0x0, /* No tasks enabled at init */
+
/* Power Device Control */
R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */
R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */
R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
/* vwindow length 0xf8 = 248 */
- R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0xf8,
- R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
+ R_CA_B_VERT_INPUT_WINDOW_LENGTH, HRES_60HZ>>1,
+ R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, HRES_60HZ>>9,
/* hwindow 0x02d0 = 720 */
R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
R_F5_PULSGEN_LINE_LENGTH, 0xad,
R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
- R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* Disable I-port output */
- R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */
- R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B", continuous mode (was 0xA0) */
- R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */
- R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */
0x00, 0x00
};
R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
- /* vsize 0x0120 = 288 */
- R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, 0x20,
- R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x01,
-
R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */
R_F5_PULSGEN_LINE_LENGTH, 0xb0,
R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
- R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* Disable I-port output */
- R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler (was 0xD0) */
- R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */
- R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */
- R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */
-
0x00, 0x00
};
static const unsigned char saa7115_init_misc[] = {
R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01,
- 0x82, 0x00, /* Reserved register - value should be zero*/
R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01,
R_84_I_PORT_SIGNAL_DEF, 0x20,
R_85_I_PORT_SIGNAL_POLAR, 0x21,
return 0;
}
+static int saa711x_set_size(struct i2c_client *client, int width, int height)
+{
+ struct saa711x_state *state = i2c_get_clientdata(client);
+ int HPSC, HFSC;
+ int VSCY;
+ int res;
+ int is_50hz = state->std & V4L2_STD_625_50;
+ int Vsrc = is_50hz ? 576 : 480;
+
+ v4l_dbg(1, debug, client, "decoder set size to %ix%i\n",width,height);
+
+ /* FIXME need better bounds checking here */
+ if ((width < 1) || (width > 1440))
+ return -EINVAL;
+ if ((height < 1) || (height > Vsrc))
+ return -EINVAL;
+
+ if (!saa711x_has_reg(state->ident,R_D0_B_HORIZ_PRESCALING)) {
+ /* Decoder only supports 720 columns and 480 or 576 lines */
+ if (width != 720)
+ return -EINVAL;
+ if (height != Vsrc)
+ return -EINVAL;
+ }
+
+ state->width = width;
+ state->height = height;
+
+ if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH))
+ return 0;
+
+ /* probably have a valid size, let's set it */
+ /* Set output width/height */
+ /* width */
+
+ saa711x_write(client, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,
+ (u8) (width & 0xff));
+ saa711x_write(client, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB,
+ (u8) ((width >> 8) & 0xff));
+
+ /* Vertical Scaling uses height/2 */
+ res=height/2;
+
+ /* On 60Hz, it is using a higher Vertical Output Size */
+ if (!is_50hz)
+ res+=(480-HRES_60HZ)>>1;
+
+ /* height */
+ saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,
+ (u8) (res & 0xff));
+ saa711x_write(client, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB,
+ (u8) ((res >> 8) & 0xff));
+
+ /* Scaling settings */
+ /* Hprescaler is floor(inres/outres) */
+ HPSC = (int)(720 / width);
+ /* 0 is not allowed (div. by zero) */
+ HPSC = HPSC ? HPSC : 1;
+ HFSC = (int)((1024 * 720) / (HPSC * width));
+ /* FIXME hardcodes to "Task B"
+ * write H prescaler integer */
+ saa711x_write(client, R_D0_B_HORIZ_PRESCALING,
+ (u8) (HPSC & 0x3f));
+
+ v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
+ /* write H fine-scaling (luminance) */
+ saa711x_write(client, R_D8_B_HORIZ_LUMA_SCALING_INC,
+ (u8) (HFSC & 0xff));
+ saa711x_write(client, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB,
+ (u8) ((HFSC >> 8) & 0xff));
+ /* write H fine-scaling (chrominance)
+ * must be lum/2, so i'll just bitshift :) */
+ saa711x_write(client, R_DC_B_HORIZ_CHROMA_SCALING,
+ (u8) ((HFSC >> 1) & 0xff));
+ saa711x_write(client, R_DD_B_HORIZ_CHROMA_SCALING_MSB,
+ (u8) ((HFSC >> 9) & 0xff));
+
+ VSCY = (int)((1024 * Vsrc) / height);
+ v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
+
+ /* Correct Contrast and Luminance */
+ saa711x_write(client, R_D5_B_LUMA_CONTRAST_CNTL,
+ (u8) (64 * 1024 / VSCY));
+ saa711x_write(client, R_D6_B_CHROMA_SATURATION_CNTL,
+ (u8) (64 * 1024 / VSCY));
+
+ /* write V fine-scaling (luminance) */
+ saa711x_write(client, R_E0_B_VERT_LUMA_SCALING_INC,
+ (u8) (VSCY & 0xff));
+ saa711x_write(client, R_E1_B_VERT_LUMA_SCALING_INC_MSB,
+ (u8) ((VSCY >> 8) & 0xff));
+ /* write V fine-scaling (chrominance) */
+ saa711x_write(client, R_E2_B_VERT_CHROMA_SCALING_INC,
+ (u8) (VSCY & 0xff));
+ saa711x_write(client, R_E3_B_VERT_CHROMA_SCALING_INC_MSB,
+ (u8) ((VSCY >> 8) & 0xff));
+
+ saa711x_writeregs(client, saa7115_cfg_reset_scaler);
+
+ /* Activates task "B" */
+ saa711x_write(client, R_80_GLOBAL_CNTL_1,
+ saa711x_read(client,R_80_GLOBAL_CNTL_1)|0x20);
+
+ return 0;
+}
+
static void saa711x_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
{
struct saa711x_state *state = i2c_get_clientdata(client);
if (std == state->std)
return;
+ state->std = std;
+
// This works for NTSC-M, SECAM-L and the 50Hz PAL variants.
if (std & V4L2_STD_525_60) {
v4l_dbg(1, debug, client, "decoder set standard 60 Hz\n");
saa711x_writeregs(client, saa7115_cfg_60hz_video);
+ saa711x_set_size(client,720,480);
} else {
v4l_dbg(1, debug, client, "decoder set standard 50 Hz\n");
saa711x_writeregs(client, saa7115_cfg_50hz_video);
+ saa711x_set_size(client,720,576);
}
/* Register 0E - Bits D6-D4 on NO-AUTO mode
011 NTSC N (3.58MHz) PAL M (3.58MHz)
100 reserved NTSC-Japan (3.58MHz)
*/
- state->std = std;
-
if (state->ident == V4L2_IDENT_SAA7111 ||
state->ident == V4L2_IDENT_SAA7113) {
u8 reg = saa711x_read(client, R_0E_CHROMA_CNTL_1) & 0x8f;
v4l_info(client, "Detected format: BW/No color\n");
break;
}
+ v4l_info(client, "Width, Height: %d, %d\n", state->width, state->height);
}
/* setup the sliced VBI lcr registers according to the sliced VBI format */
return 0;
}
-static int saa711x_set_size(struct i2c_client *client, int width, int height)
-{
- struct saa711x_state *state = i2c_get_clientdata(client);
- int HPSC, HFSC;
- int VSCY;
- int res;
- int is_50hz = state->std & V4L2_STD_625_50;
- int Vsrc = is_50hz ? 576 : 480+16;
-
- v4l_dbg(1, debug, client, "decoder set size to %ix%i\n",width,height);
-
- /* FIXME need better bounds checking here */
- if ((width < 1) || (width > 1440))
- return -EINVAL;
- if ((height < 1) || (height > 960))
- return -EINVAL;
-
- if (!saa711x_has_reg(state->ident,R_D0_B_HORIZ_PRESCALING)) {
- /* Decoder only supports 720 columns and 480 or 576 lines */
- if (width != 720)
- return -EINVAL;
- if (height != Vsrc)
- return -EINVAL;
- }
- if (!saa711x_has_reg(state->ident,R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH))
- return 0;
-
- /* probably have a valid size, let's set it */
- /* Set output width/height */
- /* width */
-
- saa711x_write(client, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,
- (u8) (width & 0xff));
- saa711x_write(client, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB,
- (u8) ((width >> 8) & 0xff));
-
- /* Vertical Scaling uses height/2 */
- res=height/2;
-
- /* height */
- saa711x_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,
- (u8) (res & 0xff));
- saa711x_write(client, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB,
- (u8) ((res >> 8) & 0xff));
-
- /* Scaling settings */
- /* Hprescaler is floor(inres/outres) */
- HPSC = (int)(720 / width);
- /* 0 is not allowed (div. by zero) */
- HPSC = HPSC ? HPSC : 1;
- HFSC = (int)((1024 * 720) / (HPSC * width));
- /* FIXME hardcodes to "Task B"
- * write H prescaler integer */
- saa711x_write(client, R_D0_B_HORIZ_PRESCALING,
- (u8) (HPSC & 0x3f));
-
- v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
- /* write H fine-scaling (luminance) */
- saa711x_write(client, R_D8_B_HORIZ_LUMA_SCALING_INC,
- (u8) (HFSC & 0xff));
- saa711x_write(client, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB,
- (u8) ((HFSC >> 8) & 0xff));
- /* write H fine-scaling (chrominance)
- * must be lum/2, so i'll just bitshift :) */
- saa711x_write(client, R_DC_B_HORIZ_CHROMA_SCALING,
- (u8) ((HFSC >> 1) & 0xff));
- saa711x_write(client, R_DD_B_HORIZ_CHROMA_SCALING_MSB,
- (u8) ((HFSC >> 9) & 0xff));
-
- VSCY = (int)((1024 * Vsrc) / height);
- v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
-
- /* Correct Contrast and Luminance */
- saa711x_write(client, R_D5_B_LUMA_CONTRAST_CNTL,
- (u8) (64 * 1024 / VSCY));
- saa711x_write(client, R_D6_B_CHROMA_SATURATION_CNTL,
- (u8) (64 * 1024 / VSCY));
-
- /* write V fine-scaling (luminance) */
- saa711x_write(client, R_E0_B_VERT_LUMA_SCALING_INC,
- (u8) (VSCY & 0xff));
- saa711x_write(client, R_E1_B_VERT_LUMA_SCALING_INC_MSB,
- (u8) ((VSCY >> 8) & 0xff));
- /* write V fine-scaling (chrominance) */
- saa711x_write(client, R_E2_B_VERT_CHROMA_SCALING_INC,
- (u8) (VSCY & 0xff));
- saa711x_write(client, R_E3_B_VERT_CHROMA_SCALING_INC_MSB,
- (u8) ((VSCY >> 8) & 0xff));
-
- saa711x_writeregs(client, saa7115_cfg_reset_scaler);
-
- return 0;
-}
-
static int saa711x_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
{
if (fmt->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
saa711x_writeregs(client, saa7115_init_auto_input);
}
saa711x_writeregs(client, saa7115_init_misc);
- state->std = V4L2_STD_NTSC;
- saa711x_set_size(client, 720, 480);
- saa711x_writeregs(client, saa7115_cfg_60hz_video);
- saa711x_set_audio_clock_freq(client, state->audclk_freq);
- saa711x_writeregs(client, saa7115_cfg_reset_scaler);
+ saa711x_set_v4lstd(client, V4L2_STD_NTSC);
i2c_attach_client(client);
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff