ASoC: Move WM5100 platform data based setup into I2C probe

Get things configured as early as possible, especially useful for the
GPIOs which might be useful anyway.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c
index 0077086d8e5b4cbb499d3f12d6f24916fdf5c285..f37d67f4058b5254c0950e150212c895c4abf93b 100644 (file)
--- a/sound/soc/codecs/wm5100.c
+++ b/sound/soc/codecs/wm5100.c
@@ -2467,24 +2467,6 @@ static int wm5100_probe(struct snd_soc_codec *codec)
                snd_soc_update_bits(codec, wm5100_dig_vu[i], WM5100_OUT_VU,
                                    WM5100_OUT_VU);
 
-       for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) {
-               snd_soc_update_bits(codec, WM5100_IN1L_CONTROL,
-                                   WM5100_IN1_MODE_MASK |
-                                   WM5100_IN1_DMIC_SUP_MASK,
-                                   (wm5100->pdata.in_mode[i] <<
-                                    WM5100_IN1_MODE_SHIFT) |
-                                   (wm5100->pdata.dmic_sup[i] <<
-                                    WM5100_IN1_DMIC_SUP_SHIFT));
-       }
-
-       for (i = 0; i < ARRAY_SIZE(wm5100->pdata.gpio_defaults); i++) {
-               if (!wm5100->pdata.gpio_defaults[i])
-                       continue;
-
-               snd_soc_write(codec, WM5100_GPIO_CTRL_1 + i,
-                             wm5100->pdata.gpio_defaults[i]);
-       }
-
        /* Don't debounce interrupts to support use of SYSCLK only */
        snd_soc_write(codec, WM5100_IRQ_DEBOUNCE_1, 0);
        snd_soc_write(codec, WM5100_IRQ_DEBOUNCE_2, 0);
@@ -2739,6 +2721,24 @@ static __devinit int wm5100_i2c_probe(struct i2c_client *i2c,
 
        wm5100_init_gpio(i2c);
 
+       for (i = 0; i < ARRAY_SIZE(wm5100->pdata.gpio_defaults); i++) {
+               if (!wm5100->pdata.gpio_defaults[i])
+                       continue;
+
+               regmap_write(wm5100->regmap, WM5100_GPIO_CTRL_1 + i,
+                            wm5100->pdata.gpio_defaults[i]);
+       }
+
+       for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) {
+               regmap_update_bits(wm5100->regmap, WM5100_IN1L_CONTROL,
+                                  WM5100_IN1_MODE_MASK |
+                                  WM5100_IN1_DMIC_SUP_MASK,
+                                  (wm5100->pdata.in_mode[i] <<
+                                   WM5100_IN1_MODE_SHIFT) |
+                                  (wm5100->pdata.dmic_sup[i] <<
+                                   WM5100_IN1_DMIC_SUP_SHIFT));
+       }
+
        ret = snd_soc_register_codec(&i2c->dev,
                                     &soc_codec_dev_wm5100, wm5100_dai,
                                     ARRAY_SIZE(wm5100_dai));