lpc4350-hitex-eval.dtb \
lpc4357-ea4357-devkit.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += \
- ea3250.dtb phy3250.dtb
+ lpc3250-ea3250.dtb \
+ phy3250.dtb
dtb-$(CONFIG_MACH_MESON6) += \
meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
+++ /dev/null
-/*
- * Embedded Artists LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "lpc32xx.dtsi"
-
-/ {
- model = "Embedded Artists LPC3250 board based on NXP LPC3250";
- compatible = "ea,ea3250", "nxp,lpc3250";
- #address-cells = <1>;
- #size-cells = <1>;
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x4000000>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
- button@21 {
- label = "Interrupt Key";
- linux,code = <103>;
- gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
- };
- key1 {
- label = "KEY1";
- linux,code = <1>;
- gpios = <&pca9532 0 0>;
- };
- key2 {
- label = "KEY2";
- linux,code = <2>;
- gpios = <&pca9532 1 0>;
- };
- key3 {
- label = "KEY3";
- linux,code = <3>;
- gpios = <&pca9532 2 0>;
- };
- key4 {
- label = "KEY4";
- linux,code = <4>;
- gpios = <&pca9532 3 0>;
- };
- joy0 {
- label = "Joystick Key 0";
- linux,code = <10>;
- gpios = <&gpio 2 0 0>; /* P2.0 */
- };
- joy1 {
- label = "Joystick Key 1";
- linux,code = <11>;
- gpios = <&gpio 2 1 0>; /* P2.1 */
- };
- joy2 {
- label = "Joystick Key 2";
- linux,code = <12>;
- gpios = <&gpio 2 2 0>; /* P2.2 */
- };
- joy3 {
- label = "Joystick Key 3";
- linux,code = <13>;
- gpios = <&gpio 2 3 0>; /* P2.3 */
- };
- joy4 {
- label = "Joystick Key 4";
- linux,code = <14>;
- gpios = <&gpio 2 4 0>; /* P2.4 */
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- /* LEDs on OEM Board */
-
- led1 {
- gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
- linux,default-trigger = "timer";
- default-state = "off";
- };
-
- led2 {
- gpios = <&gpio 2 10 1>; /* P2.10, active low */
- default-state = "off";
- };
-
- led3 {
- gpios = <&gpio 2 11 1>; /* P2.11, active low */
- default-state = "off";
- };
-
- led4 {
- gpios = <&gpio 2 12 1>; /* P2.12, active low */
- default-state = "off";
- };
-
- /* LEDs on Base Board */
-
- lede1 {
- gpios = <&pca9532 8 0>;
- default-state = "off";
- };
- lede2 {
- gpios = <&pca9532 9 0>;
- default-state = "off";
- };
- lede3 {
- gpios = <&pca9532 10 0>;
- default-state = "off";
- };
- lede4 {
- gpios = <&pca9532 11 0>;
- default-state = "off";
- };
- lede5 {
- gpios = <&pca9532 12 0>;
- default-state = "off";
- };
- lede6 {
- gpios = <&pca9532 13 0>;
- default-state = "off";
- };
- lede7 {
- gpios = <&pca9532 14 0>;
- default-state = "off";
- };
- lede8 {
- gpios = <&pca9532 15 0>;
- default-state = "off";
- };
- };
-};
-
-/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
-&adc {
- status = "okay";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
-
- uda1380: uda1380@18 {
- compatible = "nxp,uda1380";
- reg = <0x18>;
- power-gpio = <&gpio 0x59 0>;
- reset-gpio = <&gpio 0x51 0>;
- dac-clk = "wspll";
- };
-
- eeprom@50 {
- compatible = "atmel,24c256";
- reg = <0x50>;
- };
-
- eeprom@57 {
- compatible = "atmel,24c64";
- reg = <0x57>;
- };
-
- pca9532: pca9532@60 {
- compatible = "nxp,pca9532";
- gpio-controller;
- #gpio-cells = <2>;
- reg = <0x60>;
- };
-};
-
-&i2c2 {
- clock-frequency = <100000>;
-};
-
-&i2cusb {
- clock-frequency = <100000>;
-
- isp1301: usb-transceiver@2d {
- compatible = "nxp,isp1301";
- reg = <0x2d>;
- };
-};
-
-&mac {
- phy-mode = "rmii";
- use-iram;
-};
-
-/* Here, choose exactly one from: ohci, usbd */
-&ohci /* &usbd */ {
- transceiver = <&isp1301>;
- status = "okay";
-};
-
-&sd {
- wp-gpios = <&pca9532 5 0>;
- cd-gpios = <&pca9532 4 0>;
- cd-inverted;
- bus-width = <4>;
- status = "okay";
-};
-
-/* 128MB Flash via SLC NAND controller */
-&slc {
- status = "okay";
-
- nxp,wdr-clks = <14>;
- nxp,wwidth = <260000000>;
- nxp,whold = <104000000>;
- nxp,wsetup = <200000000>;
- nxp,rdr-clks = <14>;
- nxp,rwidth = <34666666>;
- nxp,rhold = <104000000>;
- nxp,rsetup = <200000000>;
- nand-on-flash-bbt;
- gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- mtd0@00000000 {
- label = "ea3250-boot";
- reg = <0x00000000 0x00080000>;
- read-only;
- };
-
- mtd1@00080000 {
- label = "ea3250-uboot";
- reg = <0x00080000 0x000c0000>;
- read-only;
- };
-
- mtd2@00140000 {
- label = "ea3250-kernel";
- reg = <0x00140000 0x00400000>;
- };
-
- mtd3@00540000 {
- label = "ea3250-rootfs";
- reg = <0x00540000 0x07ac0000>;
- };
- };
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart5 {
- status = "okay";
-};
-
-&uart6 {
- status = "okay";
-};
--- /dev/null
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "lpc32xx.dtsi"
+
+/ {
+ model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+ compatible = "ea,ea3250", "nxp,lpc3250";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x4000000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@21 {
+ label = "Interrupt Key";
+ linux,code = <103>;
+ gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+ };
+ key1 {
+ label = "KEY1";
+ linux,code = <1>;
+ gpios = <&pca9532 0 0>;
+ };
+ key2 {
+ label = "KEY2";
+ linux,code = <2>;
+ gpios = <&pca9532 1 0>;
+ };
+ key3 {
+ label = "KEY3";
+ linux,code = <3>;
+ gpios = <&pca9532 2 0>;
+ };
+ key4 {
+ label = "KEY4";
+ linux,code = <4>;
+ gpios = <&pca9532 3 0>;
+ };
+ joy0 {
+ label = "Joystick Key 0";
+ linux,code = <10>;
+ gpios = <&gpio 2 0 0>; /* P2.0 */
+ };
+ joy1 {
+ label = "Joystick Key 1";
+ linux,code = <11>;
+ gpios = <&gpio 2 1 0>; /* P2.1 */
+ };
+ joy2 {
+ label = "Joystick Key 2";
+ linux,code = <12>;
+ gpios = <&gpio 2 2 0>; /* P2.2 */
+ };
+ joy3 {
+ label = "Joystick Key 3";
+ linux,code = <13>;
+ gpios = <&gpio 2 3 0>; /* P2.3 */
+ };
+ joy4 {
+ label = "Joystick Key 4";
+ linux,code = <14>;
+ gpios = <&gpio 2 4 0>; /* P2.4 */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* LEDs on OEM Board */
+
+ led1 {
+ gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+ linux,default-trigger = "timer";
+ default-state = "off";
+ };
+
+ led2 {
+ gpios = <&gpio 2 10 1>; /* P2.10, active low */
+ default-state = "off";
+ };
+
+ led3 {
+ gpios = <&gpio 2 11 1>; /* P2.11, active low */
+ default-state = "off";
+ };
+
+ led4 {
+ gpios = <&gpio 2 12 1>; /* P2.12, active low */
+ default-state = "off";
+ };
+
+ /* LEDs on Base Board */
+
+ lede1 {
+ gpios = <&pca9532 8 0>;
+ default-state = "off";
+ };
+ lede2 {
+ gpios = <&pca9532 9 0>;
+ default-state = "off";
+ };
+ lede3 {
+ gpios = <&pca9532 10 0>;
+ default-state = "off";
+ };
+ lede4 {
+ gpios = <&pca9532 11 0>;
+ default-state = "off";
+ };
+ lede5 {
+ gpios = <&pca9532 12 0>;
+ default-state = "off";
+ };
+ lede6 {
+ gpios = <&pca9532 13 0>;
+ default-state = "off";
+ };
+ lede7 {
+ gpios = <&pca9532 14 0>;
+ default-state = "off";
+ };
+ lede8 {
+ gpios = <&pca9532 15 0>;
+ default-state = "off";
+ };
+ };
+};
+
+/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+&adc {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+
+ uda1380: uda1380@18 {
+ compatible = "nxp,uda1380";
+ reg = <0x18>;
+ power-gpio = <&gpio 0x59 0>;
+ reset-gpio = <&gpio 0x51 0>;
+ dac-clk = "wspll";
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+
+ pca9532: pca9532@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+};
+
+&i2cusb {
+ clock-frequency = <100000>;
+
+ isp1301: usb-transceiver@2d {
+ compatible = "nxp,isp1301";
+ reg = <0x2d>;
+ };
+};
+
+&mac {
+ phy-mode = "rmii";
+ use-iram;
+};
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+ transceiver = <&isp1301>;
+ status = "okay";
+};
+
+&sd {
+ wp-gpios = <&pca9532 5 0>;
+ cd-gpios = <&pca9532 4 0>;
+ cd-inverted;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* 128MB Flash via SLC NAND controller */
+&slc {
+ status = "okay";
+
+ nxp,wdr-clks = <14>;
+ nxp,wwidth = <260000000>;
+ nxp,whold = <104000000>;
+ nxp,wsetup = <200000000>;
+ nxp,rdr-clks = <14>;
+ nxp,rwidth = <34666666>;
+ nxp,rhold = <104000000>;
+ nxp,rsetup = <200000000>;
+ nand-on-flash-bbt;
+ gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mtd0@00000000 {
+ label = "ea3250-boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ mtd1@00080000 {
+ label = "ea3250-uboot";
+ reg = <0x00080000 0x000c0000>;
+ read-only;
+ };
+
+ mtd2@00140000 {
+ label = "ea3250-kernel";
+ reg = <0x00140000 0x00400000>;
+ };
+
+ mtd3@00540000 {
+ label = "ea3250-rootfs";
+ reg = <0x00540000 0x07ac0000>;
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&uart6 {
+ status = "okay";
+};