bnx2x: Remove configured vlans as part of unload sequence.

[ Upstream commit 04f05230c5c13b1384f66f5186a68d7499e34622 ]

Vlans are not getting removed when drivers are unloaded. The recent storm
firmware versions had added safeguards against re-configuring an already
configured vlan. As a result, PF inner reload flows (e.g., mtu change)
might trigger an assertion.
This change is going to remove vlans (same as we do for MACs) when doing
a chip cleanup during unload.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 688d84cd61877a835d0f04942c8dcf49f01ff13c..433a7a37575dc6c3834ef78d65144bc1b5b39541 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8462,6 +8462,7 @@ int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
        /* Fill a user request section if needed */
        if (!test_bit(RAMROD_CONT, ramrod_flags)) {
                ramrod_param.user_req.u.vlan.vlan = vlan;
+               __set_bit(BNX2X_VLAN, &ramrod_param.user_req.vlan_mac_flags);
                /* Set the command: ADD or DEL */
                if (set)
                        ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD;
@@ -8482,6 +8483,27 @@ int bnx2x_set_vlan_one(struct bnx2x *bp, u16 vlan,
        return rc;
 }
 
+static int bnx2x_del_all_vlans(struct bnx2x *bp)
+{
+       struct bnx2x_vlan_mac_obj *vlan_obj = &bp->sp_objs[0].vlan_obj;
+       unsigned long ramrod_flags = 0, vlan_flags = 0;
+       struct bnx2x_vlan_entry *vlan;
+       int rc;
+
+       __set_bit(RAMROD_COMP_WAIT, &ramrod_flags);
+       __set_bit(BNX2X_VLAN, &vlan_flags);
+       rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_flags, &ramrod_flags);
+       if (rc)
+               return rc;
+
+       /* Mark that hw forgot all entries */
+       list_for_each_entry(vlan, &bp->vlan_reg, link)
+               vlan->hw = false;
+       bp->vlan_cnt = 0;
+
+       return 0;
+}
+
 int bnx2x_del_all_macs(struct bnx2x *bp,
                       struct bnx2x_vlan_mac_obj *mac_obj,
                       int mac_type, bool wait_for_comp)
@@ -9320,6 +9342,11 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode, bool keep_link)
                BNX2X_ERR("Failed to schedule DEL commands for UC MACs list: %d\n",
                          rc);
 
+       /* Remove all currently configured VLANs */
+       rc = bnx2x_del_all_vlans(bp);
+       if (rc < 0)
+               BNX2X_ERR("Failed to delete all VLANs\n");
+
        /* Disable LLH */
        if (!CHIP_IS_E1(bp))
                REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
@@ -13006,13 +13033,6 @@ static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode)
 
 int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
 {
-       struct bnx2x_vlan_entry *vlan;
-
-       /* The hw forgot all entries after reload */
-       list_for_each_entry(vlan, &bp->vlan_reg, link)
-               vlan->hw = false;
-       bp->vlan_cnt = 0;
-
        /* Don't set rx mode here. Our caller will do it. */
        bnx2x_vlan_configure(bp, false);
 

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
index 0bf2fd470819e64d2d7788b57caee6569b9b3828..7a6e82db423123585574c88765fb00f14ab3b603 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h
@@ -265,6 +265,7 @@ enum {
        BNX2X_ETH_MAC,
        BNX2X_ISCSI_ETH_MAC,
        BNX2X_NETQ_ETH_MAC,
+       BNX2X_VLAN,
        BNX2X_DONT_CONSUME_CAM_CREDIT,
        BNX2X_DONT_CONSUME_CAM_CREDIT_DEST,
 };
@@ -272,7 +273,8 @@ enum {
 #define BNX2X_VLAN_MAC_CMP_MASK        (1 << BNX2X_UC_LIST_MAC | \
                                 1 << BNX2X_ETH_MAC | \
                                 1 << BNX2X_ISCSI_ETH_MAC | \
-                                1 << BNX2X_NETQ_ETH_MAC)
+                                1 << BNX2X_NETQ_ETH_MAC | \
+                                1 << BNX2X_VLAN)
 #define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \
        ((flags) & BNX2X_VLAN_MAC_CMP_MASK)