This patch fix spelling typo in printk messages.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
break;
case DW_CFA_GNU_window_save:
default:
- unw_debug("UNKNOW OPCODE 0x%x\n", opcode);
+ unw_debug("UNKNOWN OPCODE 0x%x\n", opcode);
result = 0;
break;
}
*/
of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
if (boot_cpuid < 0) {
- printk("Failed to indentify boot CPU !\n");
+ printk("Failed to identify boot CPU !\n");
BUG();
}
/* Map the global utilities registers. */
guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
if (!guts_np) {
- pr_err("p1022rdk: missing global utilties device node\n");
+ pr_err("p1022rdk: missing global utilities device node\n");
return;
}
guts = of_iomap(guts_np, 0);
of_node_put(guts_np);
if (!guts) {
- pr_err("p1022rdk: could not map global utilties device\n");
+ pr_err("p1022rdk: could not map global utilities device\n");
return;
}
/* test 3: check the value hasn't changed */
/* If this test fails, we managed to overwrite the data */
if (!rodata_test_data) {
- printk(KERN_ERR "rodata_test: Test 3 failes (end data)\n");
+ printk(KERN_ERR "rodata_test: Test 3 fails (end data)\n");
return -ENODEV;
}
/* test 4: check if the rodata section is 4Kb aligned */
indio_dev->num_channels * 2,
GFP_KERNEL);
if (st->buffer == NULL) {
- dev_err(&indio_dev->dev, "Can't allocate bufffer\n");
+ dev_err(&indio_dev->dev, "Can't allocate buffer\n");
return -ENOMEM;
}
}
card->ci = get_card_info(ent->driver_data);
if (!card->ci) {
- pr_info("mISDN: do not have informations about adapter at %s\n",
+ pr_info("mISDN: do not have information about adapter at %s\n",
pci_name(pdev));
kfree(card);
pci_disable_device(pdev);
}
}
printk(KERN_WARNING
- "%s: dsp is not present in its own conf_meber list.\n",
+ "%s: dsp is not present in its own conf_member list.\n",
__func__);
return -EINVAL;
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: enable mixing of "
- "tx-data with conf mebers\n", __func__);
+ "tx-data with conf members\n", __func__);
dsp->tx_mix = 1;
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
}
if (dsp_debug & DEBUG_DSP_CORE)
printk(KERN_DEBUG "%s: disable mixing of "
- "tx-data with conf mebers\n", __func__);
+ "tx-data with conf members\n", __func__);
dsp->tx_mix = 0;
dsp_cmx_hardware(dsp->conf, dsp);
dsp_rx_off(dsp);
s->mixer_gain->cur.val, s->if_gain->val);
break;
default:
- dev_dbg(&s->spi->dev, "unkown control %d\n", ctrl->id);
+ dev_dbg(&s->spi->dev, "unknown control %d\n", ctrl->id);
ret = -EINVAL;
}
mc = kzalloc(mc_num * sizeof(struct bnx2x_mcast_list_elem),
GFP_KERNEL);
if (!mc) {
- BNX2X_ERR("Cannot Configure mulicasts due to lack of memory\n");
+ BNX2X_ERR("Cannot Configure multicasts due to lack of memory\n");
return -ENOMEM;
}
}
if (rv)
netdev_err(adapter->netdev,
- "Failed to set Rx coalescing parametrs\n");
+ "Failed to set Rx coalescing parameters\n");
return rv;
}
bw = WMI_PEER_CHWIDTH_80MHZ;
break;
case IEEE80211_STA_RX_BW_160:
- ath10k_warn(ar, "Invalid bandwith %d in rc update for %pM\n",
+ ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n",
sta->bandwidth, sta->addr);
bw = WMI_PEER_CHWIDTH_20MHZ;
break;
rtl_dm_dig->min_undec_pwdb_for_dm =
rtlpriv->dm.entry_min_undec_sm_pwdb;
RT_TRACE(rtlpriv, COMP_BB_POWERSAVING, DBG_LOUD,
- "AP Ext Port or disconnet PWDB = 0x%x\n",
+ "AP Ext Port or disconnect PWDB = 0x%x\n",
rtl_dm_dig->min_undec_pwdb_for_dm);
}
RT_TRACE(rtlpriv, COMP_DIG, DBG_LOUD, "MinUndecoratedPWDBForDM =%d\n",
if (rtlpriv->falsealm_cnt.cnt_all > 10000) {
RT_TRACE(rtlpriv, COMP_DIG, DBG_LOUD,
- "Abnornally false alarm case.\n");
+ "Abnormally false alarm case.\n");
if (dm_digtable->large_fa_hit != 3)
dm_digtable->large_fa_hit++;
}
if (flags & HPEE_FUNCTION_INFO_CFG_FREE_FORM) {
/* I have no idea how to handle this */
- printk("function %d have free-form confgiuration, skipping ",
+ printk("function %d have free-form configuration, skipping ",
num_func);
pos = p0 + function_len;
continue;
beiscsi_log(phba, KERN_WARNING,
BEISCSI_LOG_INIT | BEISCSI_LOG_EH |
BEISCSI_LOG_CONFIG,
- "BC_%d : Insufficent Buffer Error "
+ "BC_%d : Insufficient Buffer Error "
"Resp_Len : %d Actual_Resp_Len : %d\n",
mbx_resp_hdr->response_length,
mbx_resp_hdr->actual_resp_len);
if (unlikely(len > sizeof(odi->systemid))) {
OSD_ERR("OSD Target error: OSD_SYSTEM_ID too long(%d). "
- "device idetification might not work\n", len);
+ "device identification might not work\n", len);
len = sizeof(odi->systemid);
}
odi->systemid_len = len;
if (off == ADDR_ERROR) {
ql_log(ql_log_fatal, vha, 0x0116,
- "Unknow addr: 0x%08lx.\n", buf[i].addr);
+ "Unknown addr: 0x%08lx.\n", buf[i].addr);
continue;
}
break;
default:
ql_log(ql_log_warn, base_vha, 0xb05f,
- "Unknow work-code=0x%x.\n", work_code);
+ "Unknown work-code=0x%x.\n", work_code);
}
return;
break;
default:
ql_log(ql_log_warn, base_vha, 0xb071,
- "Unknow Device State: %x.\n", dev_state);
+ "Unknown Device State: %x.\n", dev_state);
qla83xx_idc_unlock(base_vha, 0);
qla8xxx_dev_failed_handler(base_vha);
rval = QLA_FUNCTION_FAILED;
int i, rc;
i = (buf->rb_max_requests + 1) * RPCRDMA_MAX_SEGS;
- dprintk("RPC: %s: initalizing %d FMRs\n", __func__, i);
+ dprintk("RPC: %s: initializing %d FMRs\n", __func__, i);
while (i--) {
r = kzalloc(sizeof(*r), GFP_KERNEL);
int i, rc;
i = (buf->rb_max_requests + 1) * RPCRDMA_MAX_SEGS;
- dprintk("RPC: %s: initalizing %d FRMRs\n", __func__, i);
+ dprintk("RPC: %s: initializing %d FRMRs\n", __func__, i);
while (i--) {
r = kzalloc(sizeof(*r), GFP_KERNEL);
return -EINVAL;
}
if (field->name[0] == '[') {
- pr_err("Semantic error: %s is not a pointor"
+ pr_err("Semantic error: %s is not a pointer"
" nor array.\n", varname);
return -EINVAL;
}
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff