mfd: axp20x: Add axp152 support
authorMichal Suchanek <hramrach@gmail.com>
Sat, 11 Jul 2015 12:59:56 +0000 (14:59 +0200)
committerLee Jones <lee.jones@linaro.org>
Tue, 11 Aug 2015 14:08:51 +0000 (15:08 +0100)
The axp152 is a stripped down version of the axp202 pmic with the battery
charging function removed as it is intended for top-set boxes.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
drivers/mfd/axp20x.c
include/linux/mfd/axp20x.h

index 8c2c3c4c9a56cfccf4c4ccce5d532c836376ca6c..b369cfce866c3ea2722233265051e514b1f58ba2 100644 (file)
 #define AXP20X_OFF     0x80
 
 static const char * const axp20x_model_names[] = {
+       "AXP152",
        "AXP202",
        "AXP209",
        "AXP221",
        "AXP288",
 };
 
+static const struct regmap_range axp152_writeable_ranges[] = {
+       regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE),
+       regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE),
+};
+
+static const struct regmap_range axp152_volatile_ranges[] = {
+       regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE),
+       regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE),
+       regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT),
+};
+
+static const struct regmap_access_table axp152_writeable_table = {
+       .yes_ranges     = axp152_writeable_ranges,
+       .n_yes_ranges   = ARRAY_SIZE(axp152_writeable_ranges),
+};
+
+static const struct regmap_access_table axp152_volatile_table = {
+       .yes_ranges     = axp152_volatile_ranges,
+       .n_yes_ranges   = ARRAY_SIZE(axp152_volatile_ranges),
+};
+
 static const struct regmap_range axp20x_writeable_ranges[] = {
        regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
        regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
@@ -93,6 +115,11 @@ static const struct regmap_access_table axp288_volatile_table = {
        .n_yes_ranges   = ARRAY_SIZE(axp288_volatile_ranges),
 };
 
+static struct resource axp152_pek_resources[] = {
+       DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
+       DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
+};
+
 static struct resource axp20x_pek_resources[] = {
        {
                .name   = "PEK_DBR",
@@ -154,6 +181,15 @@ static struct resource axp288_fuel_gauge_resources[] = {
        },
 };
 
+static const struct regmap_config axp152_regmap_config = {
+       .reg_bits       = 8,
+       .val_bits       = 8,
+       .wr_table       = &axp152_writeable_table,
+       .volatile_table = &axp152_volatile_table,
+       .max_register   = AXP152_PWM1_DUTY_CYCLE,
+       .cache_type     = REGCACHE_RBTREE,
+};
+
 static const struct regmap_config axp20x_regmap_config = {
        .reg_bits       = 8,
        .val_bits       = 8,
@@ -184,6 +220,26 @@ static const struct regmap_config axp288_regmap_config = {
 #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask)                   \
        [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
 
+static const struct regmap_irq axp152_regmap_irqs[] = {
+       INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT,         0, 6),
+       INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL,         0, 5),
+       INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT,        0, 3),
+       INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL,        0, 2),
+       INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW,            1, 5),
+       INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW,            1, 4),
+       INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW,            1, 3),
+       INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW,            1, 2),
+       INIT_REGMAP_IRQ(AXP152, PEK_SHORT,              1, 1),
+       INIT_REGMAP_IRQ(AXP152, PEK_LONG,               1, 0),
+       INIT_REGMAP_IRQ(AXP152, TIMER,                  2, 7),
+       INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE,           2, 6),
+       INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE,           2, 5),
+       INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT,            2, 3),
+       INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT,            2, 2),
+       INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT,            2, 1),
+       INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT,            2, 0),
+};
+
 static const struct regmap_irq axp20x_regmap_irqs[] = {
        INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V,            0, 7),
        INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN,            0, 6),
@@ -293,6 +349,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = {
 };
 
 static const struct of_device_id axp20x_of_match[] = {
+       { .compatible = "x-powers,axp152", .data = (void *) AXP152_ID },
        { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
        { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
        { .compatible = "x-powers,axp221", .data = (void *) AXP221_ID },
@@ -317,6 +374,18 @@ static const struct acpi_device_id axp20x_acpi_match[] = {
 };
 MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match);
 
+static const struct regmap_irq_chip axp152_regmap_irq_chip = {
+       .name                   = "axp152_irq_chip",
+       .status_base            = AXP152_IRQ1_STATE,
+       .ack_base               = AXP152_IRQ1_STATE,
+       .mask_base              = AXP152_IRQ1_EN,
+       .mask_invert            = true,
+       .init_ack_masked        = true,
+       .irqs                   = axp152_regmap_irqs,
+       .num_irqs               = ARRAY_SIZE(axp152_regmap_irqs),
+       .num_regs               = 3,
+};
+
 static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
        .name                   = "axp20x_irq_chip",
        .status_base            = AXP20X_IRQ1_STATE,
@@ -375,6 +444,14 @@ static struct mfd_cell axp22x_cells[] = {
        },
 };
 
+static struct mfd_cell axp152_cells[] = {
+       {
+               .name                   = "axp20x-pek",
+               .num_resources          = ARRAY_SIZE(axp152_pek_resources),
+               .resources              = axp152_pek_resources,
+       },
+};
+
 static struct resource axp288_adc_resources[] = {
        {
                .name  = "GPADC",
@@ -513,6 +590,12 @@ static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
        }
 
        switch (axp20x->variant) {
+       case AXP152_ID:
+               axp20x->nr_cells = ARRAY_SIZE(axp152_cells);
+               axp20x->cells = axp152_cells;
+               axp20x->regmap_cfg = &axp152_regmap_config;
+               axp20x->regmap_irq_chip = &axp152_regmap_irq_chip;
+               break;
        case AXP202_ID:
        case AXP209_ID:
                axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
index c2aa853fb412c1b1b3a7c714842ffd494b7cc606..52203d5f7984ab67f77604a1508fcecdd40e4c8b 100644 (file)
@@ -12,7 +12,8 @@
 #define __LINUX_MFD_AXP20X_H
 
 enum {
-       AXP202_ID = 0,
+       AXP152_ID = 0,
+       AXP202_ID,
        AXP209_ID,
        AXP221_ID,
        AXP288_ID,
@@ -22,6 +23,24 @@ enum {
 #define AXP20X_DATACACHE(m)            (0x04 + (m))
 
 /* Power supply */
+#define AXP152_PWR_OP_MODE             0x01
+#define AXP152_LDO3456_DC1234_CTRL     0x12
+#define AXP152_ALDO_OP_MODE            0x13
+#define AXP152_LDO0_CTRL               0x15
+#define AXP152_DCDC2_V_OUT             0x23
+#define AXP152_DCDC2_V_SCAL            0x25
+#define AXP152_DCDC1_V_OUT             0x26
+#define AXP152_DCDC3_V_OUT             0x27
+#define AXP152_ALDO12_V_OUT            0x28
+#define AXP152_DLDO1_V_OUT             0x29
+#define AXP152_DLDO2_V_OUT             0x2a
+#define AXP152_DCDC4_V_OUT             0x2b
+#define AXP152_V_OFF                   0x31
+#define AXP152_OFF_CTRL                        0x32
+#define AXP152_PEK_KEY                 0x36
+#define AXP152_DCDC_FREQ               0x37
+#define AXP152_DCDC_MODE               0x80
+
 #define AXP20X_PWR_INPUT_STATUS                0x00
 #define AXP20X_PWR_OP_MODE             0x01
 #define AXP20X_USB_OTG_STATUS          0x02
@@ -69,6 +88,13 @@ enum {
 #define AXP22X_CHRG_CTRL3              0x35
 
 /* Interrupt */
+#define AXP152_IRQ1_EN                 0x40
+#define AXP152_IRQ2_EN                 0x41
+#define AXP152_IRQ3_EN                 0x42
+#define AXP152_IRQ1_STATE              0x48
+#define AXP152_IRQ2_STATE              0x49
+#define AXP152_IRQ3_STATE              0x4a
+
 #define AXP20X_IRQ1_EN                 0x40
 #define AXP20X_IRQ2_EN                 0x41
 #define AXP20X_IRQ3_EN                 0x42
@@ -127,6 +153,19 @@ enum {
 #define AXP22X_PWREN_CTRL2             0x8d
 
 /* GPIO */
+#define AXP152_GPIO0_CTRL              0x90
+#define AXP152_GPIO1_CTRL              0x91
+#define AXP152_GPIO2_CTRL              0x92
+#define AXP152_GPIO3_CTRL              0x93
+#define AXP152_LDOGPIO2_V_OUT          0x96
+#define AXP152_GPIO_INPUT              0x97
+#define AXP152_PWM0_FREQ_X             0x98
+#define AXP152_PWM0_FREQ_Y             0x99
+#define AXP152_PWM0_DUTY_CYCLE         0x9a
+#define AXP152_PWM1_FREQ_X             0x9b
+#define AXP152_PWM1_FREQ_Y             0x9c
+#define AXP152_PWM1_DUTY_CYCLE         0x9d
+
 #define AXP20X_GPIO0_CTRL              0x90
 #define AXP20X_LDO5_V_OUT              0x91
 #define AXP20X_GPIO1_CTRL              0x92
@@ -217,6 +256,26 @@ enum {
 };
 
 /* IRQs */
+enum {
+       AXP152_IRQ_LDO0IN_CONNECT = 1,
+       AXP152_IRQ_LDO0IN_REMOVAL,
+       AXP152_IRQ_ALDO0IN_CONNECT,
+       AXP152_IRQ_ALDO0IN_REMOVAL,
+       AXP152_IRQ_DCDC1_V_LOW,
+       AXP152_IRQ_DCDC2_V_LOW,
+       AXP152_IRQ_DCDC3_V_LOW,
+       AXP152_IRQ_DCDC4_V_LOW,
+       AXP152_IRQ_PEK_SHORT,
+       AXP152_IRQ_PEK_LONG,
+       AXP152_IRQ_TIMER,
+       AXP152_IRQ_PEK_RIS_EDGE,
+       AXP152_IRQ_PEK_FAL_EDGE,
+       AXP152_IRQ_GPIO3_INPUT,
+       AXP152_IRQ_GPIO2_INPUT,
+       AXP152_IRQ_GPIO1_INPUT,
+       AXP152_IRQ_GPIO0_INPUT,
+};
+
 enum {
        AXP20X_IRQ_ACIN_OVER_V = 1,
        AXP20X_IRQ_ACIN_PLUGIN,