net: phy: smsc: disable energy detect mode
authorHeiko Schocher <hs@denx.de>
Sat, 17 Oct 2015 04:04:36 +0000 (06:04 +0200)
committerDavid S. Miller <davem@davemloft.net>
Wed, 21 Oct 2015 13:41:44 +0000 (06:41 -0700)
On some boards the energy enable detect mode leads in
trouble with some switches, so make the enabling of
this mode configurable through DT.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/devicetree/bindings/net/smsc-lan87xx.txt [new file with mode: 0644]
drivers/net/phy/smsc.c

diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
new file mode 100644 (file)
index 0000000..974edd5
--- /dev/null
@@ -0,0 +1,24 @@
+SMSC LAN87xx Ethernet PHY
+
+Some boards require special tuning values. Configure them
+through an Ethernet OF device node.
+
+Optional properties:
+
+- smsc,disable-energy-detect:
+  If set, do not enable energy detect mode for the SMSC phy.
+  default: enable energy detect mode
+
+Examples:
+smsc phy with disabled energy detect mode on an am335x based board.
+&davinci_mdio {
+       pinctrl-names = "default", "sleep";
+       pinctrl-0 = <&davinci_mdio_default>;
+       pinctrl-1 = <&davinci_mdio_sleep>;
+       status = "okay";
+
+       ethernetphy0: ethernet-phy@0 {
+               reg = <0>;
+               smsc,disable-energy-detect;
+       };
+};
index 70b08958763a129fff47ad00a1db130c1334f254..dc2da87709185870f808ef626e8446893c658db6 100644 (file)
@@ -43,16 +43,25 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 
 static int smsc_phy_config_init(struct phy_device *phydev)
 {
+       int __maybe_unused len;
+       struct device *dev __maybe_unused = &phydev->dev;
+       struct device_node *of_node __maybe_unused = dev->of_node;
        int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+       int enable_energy = 1;
 
        if (rc < 0)
                return rc;
 
-       /* Enable energy detect mode for this SMSC Transceivers */
-       rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
-                      rc | MII_LAN83C185_EDPWRDOWN);
-       if (rc < 0)
-               return rc;
+       if (of_find_property(of_node, "smsc,disable-energy-detect", &len))
+               enable_energy = 0;
+
+       if (enable_energy) {
+               /* Enable energy detect mode for this SMSC Transceivers */
+               rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
+                              rc | MII_LAN83C185_EDPWRDOWN);
+               if (rc < 0)
+                       return rc;
+       }
 
        return smsc_phy_ack_interrupt(phydev);
 }