i2c: omap: Add support for 16-bit registers

The current i2c-omap driver is set up for 32-bit registers, which
corresponds to most OMAP devices.  However, OMAP730/850 based
devices use a 16-bit register size.

This change modifies the driver to perform a runtime CPU type check
to determine the register sizes, and uses a bit shift of either 1
or 2 bits to compute the proper register sizes for all registers.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0037e31076bad86502442a95ed9d95206bdbde0e..913abd7c172fa4c5b8a05840636c6700d4e1fbbf 100644 (file)
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -49,24 +49,24 @@
 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
 
 #define OMAP_I2C_REV_REG               0x00
-#define OMAP_I2C_IE_REG                        0x04
-#define OMAP_I2C_STAT_REG              0x08
-#define OMAP_I2C_IV_REG                        0x0c
+#define OMAP_I2C_IE_REG                        0x01
+#define OMAP_I2C_STAT_REG              0x02
+#define OMAP_I2C_IV_REG                        0x03
 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
-#define OMAP_I2C_WE_REG                        0x0c
-#define OMAP_I2C_SYSS_REG              0x10
-#define OMAP_I2C_BUF_REG               0x14
-#define OMAP_I2C_CNT_REG               0x18
-#define OMAP_I2C_DATA_REG              0x1c
-#define OMAP_I2C_SYSC_REG              0x20
-#define OMAP_I2C_CON_REG               0x24
-#define OMAP_I2C_OA_REG                        0x28
-#define OMAP_I2C_SA_REG                        0x2c
-#define OMAP_I2C_PSC_REG               0x30
-#define OMAP_I2C_SCLL_REG              0x34
-#define OMAP_I2C_SCLH_REG              0x38
-#define OMAP_I2C_SYSTEST_REG           0x3c
-#define OMAP_I2C_BUFSTAT_REG           0x40
+#define OMAP_I2C_WE_REG                        0x03
+#define OMAP_I2C_SYSS_REG              0x04
+#define OMAP_I2C_BUF_REG               0x05
+#define OMAP_I2C_CNT_REG               0x06
+#define OMAP_I2C_DATA_REG              0x07
+#define OMAP_I2C_SYSC_REG              0x08
+#define OMAP_I2C_CON_REG               0x09
+#define OMAP_I2C_OA_REG                        0x0a
+#define OMAP_I2C_SA_REG                        0x0b
+#define OMAP_I2C_PSC_REG               0x0c
+#define OMAP_I2C_SCLL_REG              0x0d
+#define OMAP_I2C_SCLH_REG              0x0e
+#define OMAP_I2C_SYSTEST_REG           0x0f
+#define OMAP_I2C_BUFSTAT_REG           0x10
 
 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
 #define OMAP_I2C_IE_XDR                (1 << 14)       /* TX Buffer drain int enable */
@@ -161,6 +161,7 @@ struct omap_i2c_dev {
        struct device           *dev;
        void __iomem            *base;          /* virtual */
        int                     irq;
+       int                     reg_shift;      /* bit shift for I2C register addresses */
        struct clk              *iclk;          /* Interface clock */
        struct clk              *fclk;          /* Functional clock */
        struct completion       cmd_complete;
@@ -189,12 +190,12 @@ struct omap_i2c_dev {
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
                                      int reg, u16 val)
 {
-       __raw_writew(val, i2c_dev->base + reg);
+       __raw_writew(val, i2c_dev->base + (reg << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-       return __raw_readw(i2c_dev->base + reg);
+       return __raw_readw(i2c_dev->base + (reg << i2c_dev->reg_shift));
 }
 
 static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
@@ -924,6 +925,11 @@ omap_i2c_probe(struct platform_device *pdev)
                dev->b_hw = 1; /* Enable hardware fixes */
        }
 
+       if (cpu_is_omap7xx())
+               dev->reg_shift = 1;
+       else
+               dev->reg_shift = 2;
+
        /* reset ASAP, clearing any IRQs */
        omap_i2c_init(dev);