clocksource/drivers/mips-gic-timer: Convert init function to return error

The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index 89d3e4d7900c51f384f3b90200c1fecb2bab013f..b164b8712f392393f76e26c114f08e7e4ffb1d9e 100644 (file)
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -146,7 +146,7 @@ static struct clocksource gic_clocksource = {
        .archdata       = { .vdso_clock_mode = VDSO_CLOCK_GIC },
 };
 
-static void __init __gic_clocksource_init(void)
+static int __init __gic_clocksource_init(void)
 {
        int ret;
 
@@ -159,6 +159,8 @@ static void __init __gic_clocksource_init(void)
        ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
        if (ret < 0)
                pr_warn("GIC: Unable to register clocksource\n");
+
+       return ret;
 }
 
 void __init gic_clocksource_init(unsigned int frequency)
@@ -179,31 +181,35 @@ static void __init gic_clocksource_of_init(struct device_node *node)
        struct clk *clk;
        int ret;
 
-       if (WARN_ON(!gic_present || !node->parent ||
-                   !of_device_is_compatible(node->parent, "mti,gic")))
-               return;
+       if (!gic_present || !node->parent ||
+           !of_device_is_compatible(node->parent, "mti,gic")) {
+               pr_warn("No DT definition for the mips gic driver");
+               return -ENXIO;
+       }
 
        clk = of_clk_get(node, 0);
        if (!IS_ERR(clk)) {
                if (clk_prepare_enable(clk) < 0) {
                        pr_err("GIC failed to enable clock\n");
                        clk_put(clk);
-                       return;
+                       return PTR_ERR(clk);
                }
 
                gic_frequency = clk_get_rate(clk);
        } else if (of_property_read_u32(node, "clock-frequency",
                                        &gic_frequency)) {
                pr_err("GIC frequency not specified.\n");
-               return;
+               return -EINVAL;;
        }
        gic_timer_irq = irq_of_parse_and_map(node, 0);
        if (!gic_timer_irq) {
                pr_err("GIC timer IRQ not specified.\n");
-               return;
+               return -EINVAL;;
        }
 
-       __gic_clocksource_init();
+       ret = __gic_clocksource_init();
+       if (ret)
+               return ret;
 
        ret = gic_clockevent_init();
        if (!ret && !IS_ERR(clk)) {
@@ -213,6 +219,8 @@ static void __init gic_clocksource_of_init(struct device_node *node)
 
        /* And finally start the counter */
        gic_start_count();
+
+       return 0;
 }
-CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
+CLOCKSOURCE_OF_DECLARE_RET(mips_gic_timer, "mti,gic-timer",
                       gic_clocksource_of_init);