broadcom: Add AC131 phy support

This patch adds support for the AC131 fast ethernet transceiver.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index dec4dec23b6694c2366a3de663ee8002858f5a46..3262a2474b07b62e9daa6a6af8bcc769151e4fda 100644 (file)
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -142,6 +142,35 @@
 #define PHY_BCM_FLAGS_MODE_1000BX      0x00000002
 #define PHY_BCM_FLAGS_MODE_COPPER      0x00000001
 
+
+/*****************************************************************************/
+/* Fast Ethernet Transceiver definitions. */
+/*****************************************************************************/
+
+#define MII_BRCM_FET_INTREG            0x1a    /* Interrupt register */
+#define MII_BRCM_FET_IR_MASK           0x0100  /* Mask all interrupts */
+#define MII_BRCM_FET_IR_LINK_EN                0x0200  /* Link status change enable */
+#define MII_BRCM_FET_IR_SPEED_EN       0x0400  /* Link speed change enable */
+#define MII_BRCM_FET_IR_DUPLEX_EN      0x0800  /* Duplex mode change enable */
+#define MII_BRCM_FET_IR_ENABLE         0x4000  /* Interrupt enable */
+
+#define MII_BRCM_FET_BRCMTEST          0x1f    /* Brcm test register */
+#define MII_BRCM_FET_BT_SRE            0x0080  /* Shadow register enable */
+
+
+/*** Shadow register definitions ***/
+
+#define MII_BRCM_FET_SHDW_MISCCTRL     0x10    /* Shadow misc ctrl */
+#define MII_BRCM_FET_SHDW_MC_FAME      0x4000  /* Force Auto MDIX enable */
+
+#define MII_BRCM_FET_SHDW_AUXMODE4     0x1a    /* Auxiliary mode 4 */
+#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003
+#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001
+
+#define MII_BRCM_FET_SHDW_AUXSTAT2     0x1b    /* Auxiliary status 2 */
+#define MII_BRCM_FET_SHDW_AS2_APDE     0x0020  /* Auto power down enable */
+
+
 MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
@@ -436,6 +465,114 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
        return ret;
 }
 
+static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set)
+{
+       int val;
+
+       val = phy_read(phydev, reg);
+       if (val < 0)
+               return val;
+
+       return phy_write(phydev, reg, val | set);
+}
+
+static int brcm_fet_config_init(struct phy_device *phydev)
+{
+       int reg, err, err2, brcmtest;
+
+       /* Reset the PHY to bring it to a known state. */
+       err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+       if (err < 0)
+               return err;
+
+       reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+       if (reg < 0)
+               return reg;
+
+       /* Unmask events we are interested in and mask interrupts globally. */
+       reg = MII_BRCM_FET_IR_DUPLEX_EN |
+             MII_BRCM_FET_IR_SPEED_EN |
+             MII_BRCM_FET_IR_LINK_EN |
+             MII_BRCM_FET_IR_ENABLE |
+             MII_BRCM_FET_IR_MASK;
+
+       err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+       if (err < 0)
+               return err;
+
+       /* Enable shadow register access */
+       brcmtest = phy_read(phydev, MII_BRCM_FET_BRCMTEST);
+       if (brcmtest < 0)
+               return brcmtest;
+
+       reg = brcmtest | MII_BRCM_FET_BT_SRE;
+
+       err = phy_write(phydev, MII_BRCM_FET_BRCMTEST, reg);
+       if (err < 0)
+               return err;
+
+       /* Set the LED mode */
+       reg = phy_read(phydev, MII_BRCM_FET_SHDW_AUXMODE4);
+       if (reg < 0) {
+               err = reg;
+               goto done;
+       }
+
+       reg &= ~MII_BRCM_FET_SHDW_AM4_LED_MASK;
+       reg |= MII_BRCM_FET_SHDW_AM4_LED_MODE1;
+
+       err = phy_write(phydev, MII_BRCM_FET_SHDW_AUXMODE4, reg);
+       if (err < 0)
+               goto done;
+
+       /* Enable auto MDIX */
+       err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_MISCCTRL,
+                                      MII_BRCM_FET_SHDW_MC_FAME);
+       if (err < 0)
+               goto done;
+
+       /* Enable auto power down */
+       err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+                                      MII_BRCM_FET_SHDW_AS2_APDE);
+
+done:
+       /* Disable shadow register access */
+       err2 = phy_write(phydev, MII_BRCM_FET_BRCMTEST, brcmtest);
+       if (!err)
+               err = err2;
+
+       return err;
+}
+
+static int brcm_fet_ack_interrupt(struct phy_device *phydev)
+{
+       int reg;
+
+       /* Clear pending interrupts.  */
+       reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+       if (reg < 0)
+               return reg;
+
+       return 0;
+}
+
+static int brcm_fet_config_intr(struct phy_device *phydev)
+{
+       int reg, err;
+
+       reg = phy_read(phydev, MII_BRCM_FET_INTREG);
+       if (reg < 0)
+               return reg;
+
+       if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+               reg &= ~MII_BRCM_FET_IR_MASK;
+       else
+               reg |= MII_BRCM_FET_IR_MASK;
+
+       err = phy_write(phydev, MII_BRCM_FET_INTREG, reg);
+       return err;
+}
+
 static struct phy_driver bcm5411_driver = {
        .phy_id         = 0x00206070,
        .phy_id_mask    = 0xfffffff0,
@@ -571,6 +708,21 @@ static struct phy_driver bcm57780_driver = {
        .driver         = { .owner = THIS_MODULE },
 };
 
+static struct phy_driver bcmac131_driver = {
+       .phy_id         = 0x0143bc70,
+       .phy_id_mask    = 0xfffffff0,
+       .name           = "Broadcom BCMAC131",
+       .features       = PHY_BASIC_FEATURES |
+                         SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+       .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+       .config_init    = brcm_fet_config_init,
+       .config_aneg    = genphy_config_aneg,
+       .read_status    = genphy_read_status,
+       .ack_interrupt  = brcm_fet_ack_interrupt,
+       .config_intr    = brcm_fet_config_intr,
+       .driver         = { .owner = THIS_MODULE },
+};
+
 static int __init broadcom_init(void)
 {
        int ret;
@@ -602,8 +754,13 @@ static int __init broadcom_init(void)
        ret = phy_driver_register(&bcm57780_driver);
        if (ret)
                goto out_57780;
+       ret = phy_driver_register(&bcmac131_driver);
+       if (ret)
+               goto out_ac131;
        return ret;
 
+out_ac131:
+       phy_driver_unregister(&bcm57780_driver);
 out_57780:
        phy_driver_unregister(&bcm50610m_driver);
 out_50610m:
@@ -626,6 +783,7 @@ out_5411:
 
 static void __exit broadcom_exit(void)
 {
+       phy_driver_unregister(&bcmac131_driver);
        phy_driver_unregister(&bcm57780_driver);
        phy_driver_unregister(&bcm50610m_driver);
        phy_driver_unregister(&bcm50610_driver);