static const char range_codes_analog[] = { 0x00, 0x20, 0x10, 0x30 };
-/*
-==============================================================================
- Forward declarations
-==============================================================================
-*/
-static int icp_multi_attach(struct comedi_device *dev,
- struct comedi_devconfig *it);
-static int icp_multi_detach(struct comedi_device *dev);
-
/*
==============================================================================
Data & Structure declarations
const struct comedi_lrange *rangelist_ao; /* rangelist for D/A */
};
-static const struct boardtype boardtypes[] = {
- {"icp_multi", /* Driver name */
- DEVICE_ID, /* PCI device ID */
- IORANGE_ICP_MULTI, /* I/O range length */
- 1, /* 1=Card supports interrupts */
- TYPE_ICP_MULTI, /* Card type = ICP MULTI */
- 16, /* Num of A/D channels */
- 8, /* Num of A/D channels in diff mode */
- 4, /* Num of D/A channels */
- 16, /* Num of digital inputs */
- 8, /* Num of digital outputs */
- 4, /* Num of counters */
- 0x0fff, /* Resolution of A/D */
- 0x0fff, /* Resolution of D/A */
- &range_analog, /* Rangelist for A/D */
- range_codes_analog, /* Range codes for programming */
- &range_analog}, /* Rangelist for D/A */
-};
-
-static struct comedi_driver driver_icp_multi = {
- .driver_name = "icp_multi",
- .module = THIS_MODULE,
- .attach = icp_multi_attach,
- .detach = icp_multi_detach,
- .num_names = ARRAY_SIZE(boardtypes),
- .board_name = &boardtypes[0].name,
- .offset = sizeof(struct boardtype),
-};
-
-static int __init driver_icp_multi_init_module(void)
-{
- return comedi_driver_register(&driver_icp_multi);
-}
-
-static void __exit driver_icp_multi_cleanup_module(void)
-{
- comedi_driver_unregister(&driver_icp_multi);
-}
-
-module_init(driver_icp_multi_init_module);
-module_exit(driver_icp_multi_cleanup_module);
-
struct icp_multi_private {
struct pcilst_struct *card; /* pointer to card */
char valid; /* card is usable */
/*
==============================================================================
- More forward declarations
+
+Name: setup_channel_list
+
+Description:
+ This function sets the appropriate channel selection,
+ differential input mode and range bits in the ADC Command/
+ Status register.
+
+Parameters:
+ struct comedi_device *dev Pointer to current service structure
+ struct comedi_subdevice *s Pointer to current subdevice structure
+ unsigned int *chanlist Pointer to packed channel list
+ unsigned int n_chan Number of channels to scan
+
+Returns:Void
+
==============================================================================
*/
-
-#if 0
-static int check_channel_list(struct comedi_device *dev,
- struct comedi_subdevice *s,
- unsigned int *chanlist, unsigned int n_chan);
-#endif
static void setup_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s,
- unsigned int *chanlist, unsigned int n_chan);
-static int icp_multi_reset(struct comedi_device *dev);
+ unsigned int *chanlist, unsigned int n_chan)
+{
+ unsigned int i, range, chanprog;
+ unsigned int diff;
-/*
-==============================================================================
- Functions
-==============================================================================
-*/
+#ifdef ICP_MULTI_EXTDEBUG
+ printk(KERN_DEBUG
+ "icp multi EDBG: setup_channel_list(...,%d)\n", n_chan);
+#endif
+ devpriv->act_chanlist_len = n_chan;
+ devpriv->act_chanlist_pos = 0;
+
+ for (i = 0; i < n_chan; i++) {
+ /* Get channel */
+ chanprog = CR_CHAN(chanlist[i]);
+
+ /* Determine if it is a differential channel (Bit 15 = 1) */
+ if (CR_AREF(chanlist[i]) == AREF_DIFF) {
+ diff = 1;
+ chanprog &= 0x0007;
+ } else {
+ diff = 0;
+ chanprog &= 0x000f;
+ }
+
+ /* Clear channel, range and input mode bits
+ * in A/D command/status register */
+ devpriv->AdcCmdStatus &= 0xf00f;
+
+ /* Set channel number and differential mode status bit */
+ if (diff) {
+ /* Set channel number, bits 9-11 & mode, bit 6 */
+ devpriv->AdcCmdStatus |= (chanprog << 9);
+ devpriv->AdcCmdStatus |= ADC_DI;
+ } else
+ /* Set channel number, bits 8-11 */
+ devpriv->AdcCmdStatus |= (chanprog << 8);
+
+ /* Get range for current channel */
+ range = this_board->rangecode[CR_RANGE(chanlist[i])];
+ /* Set range. bits 4-5 */
+ devpriv->AdcCmdStatus |= range;
+
+ /* Output channel, range, mode to ICP Multi */
+ writew(devpriv->AdcCmdStatus,
+ devpriv->io_addr + ICP_MULTI_ADC_CSR);
+
+#ifdef ICP_MULTI_EXTDEBUG
+ printk(KERN_DEBUG
+ "GS: %2d. [%4x]=%4x %4x\n", i, chanprog, range,
+ devpriv->act_chanlist[i]);
+#endif
+ }
+
+}
/*
==============================================================================
/*
==============================================================================
-Name: setup_channel_list
-
-Description:
- This function sets the appropriate channel selection,
- differential input mode and range bits in the ADC Command/
- Status register.
-
-Parameters:
- struct comedi_device *dev Pointer to current service structure
- struct comedi_subdevice *s Pointer to current subdevice structure
- unsigned int *chanlist Pointer to packed channel list
- unsigned int n_chan Number of channels to scan
-
-Returns:Void
-
-==============================================================================
-*/
-static void setup_channel_list(struct comedi_device *dev,
- struct comedi_subdevice *s,
- unsigned int *chanlist, unsigned int n_chan)
-{
- unsigned int i, range, chanprog;
- unsigned int diff;
-
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "icp multi EDBG: setup_channel_list(...,%d)\n", n_chan);
-#endif
- devpriv->act_chanlist_len = n_chan;
- devpriv->act_chanlist_pos = 0;
-
- for (i = 0; i < n_chan; i++) {
- /* Get channel */
- chanprog = CR_CHAN(chanlist[i]);
-
- /* Determine if it is a differential channel (Bit 15 = 1) */
- if (CR_AREF(chanlist[i]) == AREF_DIFF) {
- diff = 1;
- chanprog &= 0x0007;
- } else {
- diff = 0;
- chanprog &= 0x000f;
- }
-
- /* Clear channel, range and input mode bits
- * in A/D command/status register */
- devpriv->AdcCmdStatus &= 0xf00f;
-
- /* Set channel number and differential mode status bit */
- if (diff) {
- /* Set channel number, bits 9-11 & mode, bit 6 */
- devpriv->AdcCmdStatus |= (chanprog << 9);
- devpriv->AdcCmdStatus |= ADC_DI;
- } else
- /* Set channel number, bits 8-11 */
- devpriv->AdcCmdStatus |= (chanprog << 8);
-
- /* Get range for current channel */
- range = this_board->rangecode[CR_RANGE(chanlist[i])];
- /* Set range. bits 4-5 */
- devpriv->AdcCmdStatus |= range;
-
- /* Output channel, range, mode to ICP Multi */
- writew(devpriv->AdcCmdStatus,
- devpriv->io_addr + ICP_MULTI_ADC_CSR);
-
-#ifdef ICP_MULTI_EXTDEBUG
- printk(KERN_DEBUG
- "GS: %2d. [%4x]=%4x %4x\n", i, chanprog, range,
- devpriv->act_chanlist[i]);
-#endif
- }
-
-}
-
-/*
-==============================================================================
-
Name: icp_multi_reset
Description:
return 0;
}
-/*
-==============================================================================
-
-Name: icp_multi_attach
-
-Description:
- This function sets up all the appropriate data for the current
- device.
-
-Parameters:
- struct comedi_device *dev Pointer to current device structure
- struct comedi_devconfig *it Pointer to current device configuration
-
-Returns:int 0 = success
-
-==============================================================================
-*/
static int icp_multi_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
{
return 0;
}
-/*
-==============================================================================
-
-Name: icp_multi_detach
-
-Description:
- This function releases all the resources used by the current
- device.
-
-Parameters:
- struct comedi_device *dev Pointer to current device structure
-
-Returns:int 0 = success
-
-==============================================================================
-*/
static int icp_multi_detach(struct comedi_device *dev)
{
-
if (dev->private)
if (devpriv->valid)
icp_multi_reset(dev);
return 0;
}
+static const struct boardtype boardtypes[] = {
+ {
+ .name = "icp_multi",
+ .device_id = DEVICE_ID,
+ .iorange = IORANGE_ICP_MULTI,
+ .have_irq = 1,
+ .cardtype = TYPE_ICP_MULTI,
+ .n_aichan = 16,
+ .n_aichand = 8,
+ .n_aochan = 4,
+ .n_dichan = 16,
+ .n_dochan = 8,
+ .n_ctrs = 4,
+ .ai_maxdata = 0x0fff,
+ .ao_maxdata = 0x0fff,
+ .rangelist_ai = &range_analog,
+ .rangecode = range_codes_analog,
+ .rangelist_ao = &range_analog,
+ },
+};
+
+static struct comedi_driver icp_multi_driver = {
+ .driver_name = "icp_multi",
+ .module = THIS_MODULE,
+ .attach = icp_multi_attach,
+ .detach = icp_multi_detach,
+ .num_names = ARRAY_SIZE(boardtypes),
+ .board_name = &boardtypes[0].name,
+ .offset = sizeof(struct boardtype),
+};
+module_comedi_driver(icp_multi_driver);
+
MODULE_AUTHOR("Comedi http://www.comedi.org");
MODULE_DESCRIPTION("Comedi low-level driver");
MODULE_LICENSE("GPL");
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff