wlcore: sdio: Populate config firmware data

Configure the config firmware names and make it available
in platform data.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c
index 5839acbbc782318ec85d1b3cfadcdd688c32cf7d..a6e94b1a12cb3f8e8cbac3c9b3074d18cfe82ee3 100644 (file)
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -216,17 +216,33 @@ static struct wl1271_if_operations sdio_ops = {
 };
 
 #ifdef CONFIG_OF
+
+static const struct wilink_family_data wl127x_data = {
+       .name = "wl127x",
+       .nvs_name = "ti-connectivity/wl127x-nvs.bin",
+};
+
+static const struct wilink_family_data wl128x_data = {
+       .name = "wl128x",
+       .nvs_name = "ti-connectivity/wl128x-nvs.bin",
+};
+
+static const struct wilink_family_data wl18xx_data = {
+       .name = "wl18xx",
+       .cfg_name = "ti-connectivity/wl18xx-conf.bin",
+};
+
 static const struct of_device_id wlcore_sdio_of_match_table[] = {
-       { .compatible = "ti,wl1271" },
-       { .compatible = "ti,wl1273" },
-       { .compatible = "ti,wl1281" },
-       { .compatible = "ti,wl1283" },
-       { .compatible = "ti,wl1801" },
-       { .compatible = "ti,wl1805" },
-       { .compatible = "ti,wl1807" },
-       { .compatible = "ti,wl1831" },
-       { .compatible = "ti,wl1835" },
-       { .compatible = "ti,wl1837" },
+       { .compatible = "ti,wl1271", .data = &wl127x_data },
+       { .compatible = "ti,wl1273", .data = &wl127x_data },
+       { .compatible = "ti,wl1281", .data = &wl128x_data },
+       { .compatible = "ti,wl1283", .data = &wl128x_data },
+       { .compatible = "ti,wl1801", .data = &wl18xx_data },
+       { .compatible = "ti,wl1805", .data = &wl18xx_data },
+       { .compatible = "ti,wl1807", .data = &wl18xx_data },
+       { .compatible = "ti,wl1831", .data = &wl18xx_data },
+       { .compatible = "ti,wl1835", .data = &wl18xx_data },
+       { .compatible = "ti,wl1837", .data = &wl18xx_data },
        { }
 };
 
@@ -234,9 +250,13 @@ static int wlcore_probe_of(struct device *dev, int *irq,
                           struct wlcore_platdev_data *pdev_data)
 {
        struct device_node *np = dev->of_node;
+       const struct of_device_id *of_id;
+
+       of_id = of_match_node(wlcore_sdio_of_match_table, np);
+       if (!of_id)
+               return -ENODEV;
 
-       if (!np || !of_match_node(wlcore_sdio_of_match_table, np))
-               return -ENODATA;
+       pdev_data->family = of_id->data;
 
        *irq = irq_of_parse_and_map(np, 0);
        if (!*irq) {
@@ -263,7 +283,7 @@ static int wlcore_probe_of(struct device *dev, int *irq,
 static int wl1271_probe(struct sdio_func *func,
                                  const struct sdio_device_id *id)
 {
-       struct wlcore_platdev_data pdev_data;
+       struct wlcore_platdev_data *pdev_data;
        struct wl12xx_sdio_glue *glue;
        struct resource res[1];
        mmc_pm_flag_t mmcflags;
@@ -275,14 +295,15 @@ static int wl1271_probe(struct sdio_func *func,
        if (func->num != 0x02)
                return -ENODEV;
 
-       memset(&pdev_data, 0x00, sizeof(pdev_data));
-       pdev_data.if_ops = &sdio_ops;
+       pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL);
+       if (!pdev_data)
+               return -ENOMEM;
 
-       glue = kzalloc(sizeof(*glue), GFP_KERNEL);
-       if (!glue) {
-               dev_err(&func->dev, "can't allocate glue\n");
-               goto out;
-       }
+       pdev_data->if_ops = &sdio_ops;
+
+       glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL);
+       if (!glue)
+               return -ENOMEM;
 
        glue->dev = &func->dev;
 
@@ -292,16 +313,16 @@ static int wl1271_probe(struct sdio_func *func,
        /* Use block mode for transferring over one block size of data */
        func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
 
-       ret = wlcore_probe_of(&func->dev, &irq, &pdev_data);
+       ret = wlcore_probe_of(&func->dev, &irq, pdev_data);
        if (ret)
-               goto out_free_glue;
+               goto out;
 
        /* if sdio can keep power while host is suspended, enable wow */
        mmcflags = sdio_get_host_pm_caps(func);
        dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
 
        if (mmcflags & MMC_PM_KEEP_POWER)
-               pdev_data.pwr_in_suspend = true;
+               pdev_data->pwr_in_suspend = true;
 
        sdio_set_drvdata(func, glue);
 
@@ -323,7 +344,7 @@ static int wl1271_probe(struct sdio_func *func,
        if (!glue->core) {
                dev_err(glue->dev, "can't allocate platform_device");
                ret = -ENOMEM;
-               goto out_free_glue;
+               goto out;
        }
 
        glue->core->dev.parent = &func->dev;
@@ -341,8 +362,8 @@ static int wl1271_probe(struct sdio_func *func,
                goto out_dev_put;
        }
 
-       ret = platform_device_add_data(glue->core, &pdev_data,
-                                      sizeof(pdev_data));
+       ret = platform_device_add_data(glue->core, pdev_data,
+                                      sizeof(*pdev_data));
        if (ret) {
                dev_err(glue->dev, "can't add platform data\n");
                goto out_dev_put;
@@ -358,9 +379,6 @@ static int wl1271_probe(struct sdio_func *func,
 out_dev_put:
        platform_device_put(glue->core);
 
-out_free_glue:
-       kfree(glue);
-
 out:
        return ret;
 }