ath10k: Add BMI param value to execute otp to hw_param

BMI parameter value to execute downloaded otp binary
is different for QCA99X0. Have a member in hw_params
to hold hw specific BMI param.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index c5f5d160deb7a4c68eccc7ddc090570e956ab404..80f38b50296bd511e913d25d825b6537b5bbc1f8 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -49,6 +49,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
                .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
                .uart_pin = 7,
                .has_shifted_cc_wraparound = true,
+               .otp_exe_param = 0,
                .fw = {
                        .dir = QCA988X_HW_2_0_FW_DIR,
                        .fw = QCA988X_HW_2_0_FW_FILE,
@@ -63,6 +64,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
                .name = "qca6174 hw2.1",
                .patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
                .uart_pin = 6,
+               .otp_exe_param = 0,
                .fw = {
                        .dir = QCA6174_HW_2_1_FW_DIR,
                        .fw = QCA6174_HW_2_1_FW_FILE,
@@ -77,6 +79,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
                .name = "qca6174 hw3.0",
                .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
                .uart_pin = 6,
+               .otp_exe_param = 0,
                .fw = {
                        .dir = QCA6174_HW_3_0_FW_DIR,
                        .fw = QCA6174_HW_3_0_FW_FILE,
@@ -91,6 +94,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
                .name = "qca6174 hw3.2",
                .patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
                .uart_pin = 6,
+               .otp_exe_param = 0,
                .fw = {
                        /* uses same binaries as hw3.0 */
                        .dir = QCA6174_HW_3_0_FW_DIR,
@@ -106,6 +110,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
                .name = "qca99x0 hw2.0",
                .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
                .uart_pin = 7,
+               .otp_exe_param = 0x00000700,
                .fw = {
                        .dir = QCA99X0_HW_2_0_FW_DIR,
                        .fw = QCA99X0_HW_2_0_FW_FILE,
@@ -413,6 +418,7 @@ out:
 static int ath10k_download_and_run_otp(struct ath10k *ar)
 {
        u32 result, address = ar->hw_params.patch_load_addr;
+       u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param;
        int ret;
 
        ret = ath10k_download_board_data(ar, ar->board_data, ar->board_len);
@@ -438,7 +444,7 @@ static int ath10k_download_and_run_otp(struct ath10k *ar)
                return ret;
        }
 
-       ret = ath10k_bmi_execute(ar, address, 0, &result);
+       ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
        if (ret) {
                ath10k_err(ar, "could not execute otp (%d)\n", ret);
                return ret;

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index b9145f539aa92aaf8a7c7a345a6672ee11f05e0a..afd21d5b25ae33ade3fcbcd688639afb7de7cccf 100644 (file)
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -572,6 +572,7 @@ struct ath10k {
                const char *name;
                u32 patch_load_addr;
                int uart_pin;
+               u32 otp_exe_param;
 
                /* This is true if given HW chip has a quirky Cycle Counter
                 * wraparound which resets to 0x7fffffff instead of 0. All