ARM: dts: am57xx-beagle-x15: Add thermal map to include fan and tmp102

BeagleBoard-X15 has capability for a fan and has an onboard TMP102
temperature sensor as well. This allows us to create a new thermal
zone (called, un-imaginatively "board"), and allows us to use some
active cooling as temperatures start edge upward in the system by
creating a new alert temperature (emperically 50C) for cpu.

NOTE: Fan is NOT mounted by default on the platform, in such a case,
all we end up doing is switch on a regulator and leak very minimal
current.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 03750af3b49a41493035217c34c16984343b226c..ae83a812d8a691be6f87c36a0bbc67b13029521e 100644 (file)
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -87,6 +87,7 @@
                gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
                gpio-fan,speed-map = <0     0>,
                                     <13000 1>;
+               #cooling-cells = <2>;
        };
 
        extcon_usb1: extcon_usb1 {
@@ -442,6 +443,7 @@
                pinctrl-0 = <&tmp102_pins_default>;
                interrupt-parent = <&gpio7>;
                interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+               #thermal-sensor-cells = <1>;
        };
 };
 
@@ -560,3 +562,50 @@
 &usb2 {
        dr_mode = "peripheral";
 };
+
+&cpu_trips {
+       cpu_alert1: cpu_alert1 {
+               temperature = <50000>; /* millicelsius */
+               hysteresis = <2000>; /* millicelsius */
+               type = "active";
+       };
+};
+
+&cpu_cooling_maps {
+       map1 {
+               trip = <&cpu_alert1>;
+               cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+       };
+};
+
+&thermal_zones {
+       board_thermal: board_thermal {
+               polling-delay-passive = <1250>; /* milliseconds */
+               polling-delay = <1500>; /* milliseconds */
+
+                               /* sensor       ID */
+               thermal-sensors = <&tmp102     0>;
+
+               board_trips: trips {
+                       board_alert0: board_alert {
+                               temperature = <40000>; /* millicelsius */
+                               hysteresis = <2000>; /* millicelsius */
+                               type = "active";
+                       };
+
+                       board_crit: board_crit {
+                               temperature = <105000>; /* millicelsius */
+                               hysteresis = <0>; /* millicelsius */
+                               type = "critical";
+                       };
+               };
+
+               board_cooling_maps: cooling-maps {
+                       map0 {
+                               trip = <&board_alert0>;
+                               cooling-device =
+                                 <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                       };
+               };
+       };
+};

diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index cb9458feb2e36fe3c2ff95b1e857bd6ea5e52dbb..ab7f87ae96f099e5fbb53ee786602ea5492ba698 100644 (file)
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -18,7 +18,7 @@ cpu_thermal: cpu_thermal {
                        /* sensor       ID */
         thermal-sensors = <&bandgap     0>;
 
-        trips {
+       cpu_trips: trips {
                 cpu_alert0: cpu_alert {
                         temperature = <100000>; /* millicelsius */
                         hysteresis = <2000>; /* millicelsius */
@@ -31,7 +31,7 @@ cpu_thermal: cpu_thermal {
                 };
         };
 
-       cooling-maps {
+       cpu_cooling_maps: cooling-maps {
                map0 {
                        trip = <&cpu_alert0>;
                        cooling-device =