IB/qib: Hold link for TX SERDES settings
authorMitko Haralanov <mitko@qlogic.com>
Fri, 21 Jan 2011 13:45:17 +0000 (13:45 +0000)
committerRoland Dreier <roland@purestorage.com>
Fri, 28 Jan 2011 23:30:02 +0000 (15:30 -0800)
Hold the IB link at DISABLED until we get the correct TX settings
on mezz boards.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
drivers/infiniband/hw/qib/qib_iba7322.c

index 50cceb3ab88547ca8b020eb3a1d80286a08cfe23..b01809a82cb0651d396734acfac8b8b35626f9b2 100644 (file)
@@ -623,7 +623,6 @@ struct qib_chippport_specific {
        u8 ibmalfusesnap;
        struct qib_qsfp_data qsfp_data;
        char epmsgbuf[192]; /* for port error interrupt msg buffer */
-       u8 bounced;
 };
 
 static struct {
@@ -1881,23 +1880,7 @@ static noinline void handle_7322_p_errors(struct qib_pportdata *ppd)
                    IB_PHYSPORTSTATE_DISABLED)
                        qib_set_ib_7322_lstate(ppd, 0,
                               QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
-               else {
-                       u32 lstate;
-                       /*
-                        * We need the current logical link state before
-                        * lflags are set in handle_e_ibstatuschanged.
-                        */
-                       lstate = qib_7322_iblink_state(ibcs);
-
-                       if (IS_QMH(dd) && !ppd->cpspec->bounced &&
-                           ltstate == IB_PHYSPORTSTATE_LINKUP &&
-                           (lstate >= IB_PORT_INIT &&
-                               lstate <= IB_PORT_ACTIVE)) {
-                               ppd->cpspec->bounced = 1;
-                               qib_7322_set_ib_cfg(ppd, QIB_IB_CFG_LSTATE,
-                                       IB_LINKCMD_DOWN | IB_LINKINITCMD_POLL);
-                       }
-
+               else
                        /*
                         * Since going into a recovery state causes the link
                         * state to go down and since recovery is transitory,
@@ -1911,7 +1894,6 @@ static noinline void handle_7322_p_errors(struct qib_pportdata *ppd)
                            ltstate != IB_PHYSPORTSTATE_RECOVERY_WAITRMT &&
                            ltstate != IB_PHYSPORTSTATE_RECOVERY_IDLE)
                                qib_handle_e_ibstatuschanged(ppd, ibcs);
-               }
        }
        if (*msg && iserr)
                qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
@@ -2381,6 +2363,11 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd)
        qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl);
        spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
 
+       /* Hold the link state machine for mezz boards */
+       if (IS_QMH(dd) || IS_QME(dd))
+               qib_set_ib_7322_lstate(ppd, 0,
+                                      QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+
        /* Also enable IBSTATUSCHG interrupt.  */
        val = qib_read_kreg_port(ppd, krp_errmask);
        qib_write_kreg_port(ppd, krp_errmask,
@@ -5702,6 +5689,11 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change)
                                ppd->cpspec->h1_val = h1;
                        /* now change the IBC and serdes, overriding generic */
                        init_txdds_table(ppd, 1);
+                       /* Re-enable the physical state machine on mezz boards
+                        * now that the correct settings have been set. */
+                       if (IS_QMH(dd) || IS_QME(dd))
+                               qib_set_ib_7322_lstate(ppd, 0,
+                                           QLOGIC_IB_IBCC_LINKINITCMD_SLEEP);
                        any++;
                }
                if (*nxt == '\n')