gpio: etraxfs: add support for ARTPEC-3

Add support for the GIO block in the ARTPEC-3 SoC.  The basic
functionality is essentialy the same as the version in the ETRAX FS,
except for a different set of ports, including a read-only port.

Cc: devicetree@vger.kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt
index abf4db736c6e3f64d6b685f5ea6075530f374a4b..170194af3027005a7aaa5e583c94e19ee555f4eb 100644 (file)
--- a/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt
@@ -2,8 +2,9 @@ Axis ETRAX FS General I/O controller bindings
 
 Required properties:
 
-- compatible:
+- compatible: one of:
   - "axis,etraxfs-gio"
+  - "axis,artpec3-gio"
 - reg: Physical base address and length of the controller's registers.
 - #gpio-cells: Should be 3
   - The first cell is the gpio offset number.

diff --git a/drivers/gpio/gpio-etraxfs.c b/drivers/gpio/gpio-etraxfs.c
index 625a9ed411dacc4fa08a7a7d2f76fa3ac98d0218..27e5d8855205f29d79b42ad311ef3bdaeaed68a8 100644 (file)
--- a/drivers/gpio/gpio-etraxfs.c
+++ b/drivers/gpio/gpio-etraxfs.c
@@ -26,6 +26,17 @@
 #define ETRAX_FS_r_pe_din      84
 #define ETRAX_FS_rw_pe_oe      88
 
+#define ARTPEC3_r_pa_din       0
+#define ARTPEC3_rw_pa_dout     4
+#define ARTPEC3_rw_pa_oe       8
+#define ARTPEC3_r_pb_din       44
+#define ARTPEC3_rw_pb_dout     48
+#define ARTPEC3_rw_pb_oe       52
+#define ARTPEC3_r_pc_din       88
+#define ARTPEC3_rw_pc_dout     92
+#define ARTPEC3_rw_pc_oe       96
+#define ARTPEC3_r_pd_din       116
+
 struct etraxfs_gpio_port {
        const char *label;
        unsigned int oe;
@@ -82,6 +93,40 @@ static const struct etraxfs_gpio_info etraxfs_gpio_etraxfs = {
        .ports = etraxfs_gpio_etraxfs_ports,
 };
 
+static const struct etraxfs_gpio_port etraxfs_gpio_artpec3_ports[] = {
+       {
+               .label  = "A",
+               .ngpio  = 32,
+               .oe     = ARTPEC3_rw_pa_oe,
+               .dout   = ARTPEC3_rw_pa_dout,
+               .din    = ARTPEC3_r_pa_din,
+       },
+       {
+               .label  = "B",
+               .ngpio  = 32,
+               .oe     = ARTPEC3_rw_pb_oe,
+               .dout   = ARTPEC3_rw_pb_dout,
+               .din    = ARTPEC3_r_pb_din,
+       },
+       {
+               .label  = "C",
+               .ngpio  = 16,
+               .oe     = ARTPEC3_rw_pc_oe,
+               .dout   = ARTPEC3_rw_pc_dout,
+               .din    = ARTPEC3_r_pc_din,
+       },
+       {
+               .label  = "D",
+               .ngpio  = 32,
+               .din    = ARTPEC3_r_pd_din,
+       },
+};
+
+static const struct etraxfs_gpio_info etraxfs_gpio_artpec3 = {
+       .num_ports = ARRAY_SIZE(etraxfs_gpio_artpec3_ports),
+       .ports = etraxfs_gpio_artpec3_ports,
+};
+
 static int etraxfs_gpio_of_xlate(struct gpio_chip *gc,
                               const struct of_phandle_args *gpiospec,
                               u32 *flags)
@@ -101,6 +146,10 @@ static const struct of_device_id etraxfs_gpio_of_table[] = {
                .compatible = "axis,etraxfs-gio",
                .data = &etraxfs_gpio_etraxfs,
        },
+       {
+               .compatible = "axis,artpec3-gio",
+               .data = &etraxfs_gpio_artpec3,
+       },
        {},
 };
 
@@ -133,14 +182,19 @@ static int etraxfs_gpio_probe(struct platform_device *pdev)
        for (i = 0; i < info->num_ports; i++) {
                struct bgpio_chip *bgc = &chips[i];
                const struct etraxfs_gpio_port *port = &info->ports[i];
+               unsigned long flags = BGPIOF_READ_OUTPUT_REG_SET;
+               void __iomem *dat = regs + port->din;
+               void __iomem *set = regs + port->dout;
+               void __iomem *dirout = regs + port->oe;
+
+               if (dirout == set) {
+                       dirout = set = NULL;
+                       flags = BGPIOF_NO_OUTPUT;
+               }
 
                ret = bgpio_init(bgc, dev, 4,
-                                regs + port->din,      /* dat */
-                                regs + port->dout,     /* set */
-                                NULL,                  /* clr */
-                                regs + port->oe,       /* dirout */
-                                NULL,                  /* dirin */
-                                BGPIOF_READ_OUTPUT_REG_SET);
+                                dat, set, NULL, dirout, NULL,
+                                flags);
                if (ret)
                        return ret;