dt-bindings: phy: tegra-xusb-padctl: Add Tegra210 support

Extend the binding to cover the set of feature found in Tegra210.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
index 6a5bb4311cfec09d80dc4e3cfa7933947dfe5a95..0bf1ae2435525c80683862c6ddab5569999ccb90 100644 (file)
--- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
+++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
@@ -35,6 +35,7 @@ Required properties:
 - compatible: Must be:
   - Tegra124: "nvidia,tegra124-xusb-padctl"
   - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"
+  - Tegra210: "nvidia,tegra210-xusb-padctl"
 - reg: Physical base address and length of the controller's registers.
 - resets: Must contain an entry for each entry in reset-names.
 - reset-names: Must include the following entries:
@@ -55,6 +56,44 @@ the pad and any of its lanes, this property must be set to "okay".
 For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie
 and sata. No extra resources are required for operation of these pads.
 
+For Tegra210, the following pads exist: usb2, hsic, pcie and sata. Below is
+a description of the properties of each pad.
+
+UTMI pad:
+---------
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Must contain the following entries:
+  - "trk": phandle and specifier referring to the USB2 tracking clock
+
+HSIC pad:
+---------
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Must contain the following entries:
+  - "trk": phandle and specifier referring to the HSIC tracking clock
+
+PCIe pad:
+---------
+
+Required properties:
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Must contain the following entries:
+  - "pll": phandle and specifier referring to the PLLE
+- resets: Must contain an entry for each entry in reset-names.
+- reset-names: Must contain the following entries:
+  - "phy": reset for the PCIe UPHY block
+
+SATA pad:
+---------
+
+Required properties:
+- resets: Must contain an entry for each entry in reset-names.
+- reset-names: Must contain the following entries:
+  - "phy": reset for the SATA UPHY block
+
 
 PHY nodes:
 ==========
@@ -84,6 +123,16 @@ For Tegra124 and Tegra132, the list of valid PHY nodes is given below:
 - sata: sata-0
   - functions: "usb3-ss", "sata"
 
+For Tegra210, the list of valid PHY nodes is given below:
+- utmi: utmi-0, utmi-1, utmi-2, utmi-3
+  - functions: "snps", "xusb", "uart"
+- hsic: hsic-0, hsic-1
+  - functions: "snps", "xusb"
+- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, pcie-5, pcie-6
+  - functions: "pcie-x1", "usb3-ss", "pcie-x4"
+- sata: sata-0
+  - functions: "usb3-ss", "sata"
+
 
 Port nodes:
 ===========
@@ -144,6 +193,7 @@ Required properties:
   to map this super-speed USB port to. The range of valid port numbers varies
   with the SoC generation:
   - 0-2: for Tegra124 and Tegra132
+  - 0-3: for Tegra210
 
 Optional properties:
 - nvidia,internal: A boolean property whose presence determines that a port
@@ -157,6 +207,11 @@ ports:
 - 2x HSIC: hsic-0, hsic-1
 - 2x super-speed USB: usb3-0, usb3-1
 
+For Tegra210, the XUSB pad controller exposes the following ports:
+- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3
+- 2x HSIC: hsic-0, hsic-1
+- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3
+
 
 Examples:
 =========
@@ -390,3 +445,289 @@ Board file:
                        };
                };
        };
+
+Tegra210:
+---------
+
+SoC include:
+
+       padctl@7009f000 {
+               compatible = "nvidia,tegra210-xusb-padctl";
+               reg = <0x0 0x7009f000 0x0 0x1000>;
+               resets = <&tegra_car 142>;
+               reset-names = "padctl";
+
+               status = "disabled";
+
+               pads {
+                       usb2 {
+                               clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>;
+                               clock-names = "trk";
+                               status = "disabled";
+
+                               lanes {
+                                       usb2-0 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       usb2-1 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       usb2-2 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       usb2-3 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+                               };
+                       };
+
+                       hsic {
+                               clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>;
+                               clock-names = "trk";
+                               status = "disabled";
+
+                               lanes {
+                                       hsic-0 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       hsic-1 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+                               };
+                       };
+
+                       pcie {
+                               clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+                               clock-names = "pll";
+                               resets = <&tegra_car 205>;
+                               reset-names = "phy";
+                               status = "disabled";
+
+                               lanes {
+                                       pcie-0 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       pcie-1 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       pcie-2 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       pcie-3 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       pcie-4 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       pcie-5 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+
+                                       pcie-6 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+                               };
+                       };
+
+                       sata {
+                               clocks = <&tegra_car TEGRA210_CLK_PLL_E>;
+                               clock-names = "pll";
+                               resets = <&tegra_car 204>;
+                               reset-names = "phy";
+                               status = "disabled";
+
+                               lanes {
+                                       sata-0 {
+                                               status = "disabled";
+                                               #phy-cells = <0>;
+                                       };
+                               };
+                       };
+               };
+
+               ports {
+                       usb2-0 {
+                               status = "disabled";
+                       };
+
+                       usb2-1 {
+                               status = "disabled";
+                       };
+
+                       usb2-2 {
+                               status = "disabled";
+                       };
+
+                       usb2-3 {
+                               status = "disabled";
+                       };
+
+                       hsic-0 {
+                               status = "disabled";
+                       };
+
+                       hsic-1 {
+                               status = "disabled";
+                       };
+
+                       usb3-0 {
+                               status = "disabled";
+                       };
+
+                       usb3-1 {
+                               status = "disabled";
+                       };
+
+                       usb3-2 {
+                               status = "disabled";
+                       };
+
+                       usb3-3 {
+                               status = "disabled";
+                       };
+               };
+       };
+
+Board file:
+
+       padctl@7009f000 {
+               status = "okay";
+
+               pads {
+                       usb2 {
+                               status = "okay";
+
+                               lanes {
+                                       usb2-0 {
+                                               nvidia,function = "xusb";
+                                               status = "okay";
+                                       };
+
+                                       usb2-1 {
+                                               nvidia,function = "xusb";
+                                               status = "okay";
+                                       };
+
+                                       usb2-2 {
+                                               nvidia,function = "xusb";
+                                               status = "okay";
+                                       };
+
+                                       usb2-3 {
+                                               nvidia,function = "xusb";
+                                               status = "okay";
+                                       };
+                               };
+                       };
+
+                       pcie {
+                               status = "okay";
+
+                               lanes {
+                                       pcie-0 {
+                                               nvidia,function = "pcie-x1";
+                                               status = "okay";
+                                       };
+
+                                       pcie-1 {
+                                               nvidia,function = "pcie-x4";
+                                               status = "okay";
+                                       };
+
+                                       pcie-2 {
+                                               nvidia,function = "pcie-x4";
+                                               status = "okay";
+                                       };
+
+                                       pcie-3 {
+                                               nvidia,function = "pcie-x4";
+                                               status = "okay";
+                                       };
+
+                                       pcie-4 {
+                                               nvidia,function = "pcie-x4";
+                                               status = "okay";
+                                       };
+
+                                       pcie-5 {
+                                               nvidia,function = "usb3-ss";
+                                               status = "okay";
+                                       };
+
+                                       pcie-6 {
+                                               nvidia,function = "usb3-ss";
+                                               status = "okay";
+                                       };
+                               };
+                       };
+
+                       sata {
+                               status = "okay";
+
+                               lanes {
+                                       sata-0 {
+                                               nvidia,function = "sata";
+                                               status = "okay";
+                                       };
+                               };
+                       };
+               };
+
+               ports {
+                       usb2-0 {
+                               status = "okay";
+                               mode = "otg";
+                       };
+
+                       usb2-1 {
+                               status = "okay";
+                               vbus-supply = <&vdd_5v0_rtl>;
+                               mode = "host";
+                       };
+
+                       usb2-2 {
+                               status = "okay";
+                               vbus-supply = <&vdd_usb_vbus>;
+                               mode = "host";
+                       };
+
+                       usb2-3 {
+                               status = "okay";
+                               mode = "host";
+                       };
+
+                       usb3-0 {
+                               status = "okay";
+                               nvidia,lanes = "pcie-6";
+                               nvidia,port = <1>;
+                       };
+
+                       usb3-1 {
+                               status = "okay";
+                               nvidia,lanes = "pcie-5";
+                               nvidia,port = <2>;
+                       };
+               };
+       };