staging: bcm: Remove Developer Debug prints in InterfaceIdleMode.c

Removed the developer debug prints BCM_DEBUG_PRINT()
as per the TODO list, also removed braces for the
if-statement to match coding style

Signed-off-by: Gokulnath Avanashilingam <Gokulnath.Avanashilingam@in.bosch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index 5959fbdcd1bef322bbc6b823cb8e5d4a20b31413..32c1e237d758c981db7cdc9a767e674900968b1f 100644 (file)
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -48,26 +48,18 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
        unsigned int    uiRegRead = 0;
        int bytes;
 
-       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer));
-
        if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
-               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
                if (ntohl(*(puiBuffer+1)) == 0 ) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W");
 
                        status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
-                       if (status) {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
+                       if (status)
                                return status;
-                       }
 
                        if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
                                uiRegRead = 0x00000000 ;
                                status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
-                               if (status) {
-                                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode    Reg");
+                               if (status)
                                        return status;
-                               }
                        }
                        /* Below Register should not br read in case of Manual and Protocol Idle mode */
                        else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
@@ -75,18 +67,15 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
                                bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
                                if (bytes < 0) {
                                        status = bytes;
-                                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
                                        return status;
                                }
                                /* clear on read Register */
                                bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
                                if (bytes < 0) {
                                        status = bytes;
-                                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort    Reg1");
                                        return status;
                                }
                        }
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
 
                        /* Set Idle Mode Flag to False and Clear IdleMode reg. */
                        Adapter->IdleMode = false;
@@ -96,13 +85,9 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
 
                } else {
                        if (TRUE == Adapter->IdleMode)
-                       {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode....");
                                return status ;
-                       }
 
                        uiRegRead = 0;
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");
 
                        if (Adapter->chip_id == BCS220_2 ||
                                Adapter->chip_id == BCS220_2BC ||
@@ -112,7 +97,6 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
                                bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
                                if (bytes < 0) {
                                        status = bytes;
-                                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
                                        return status;
                                }
 
@@ -120,16 +104,12 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
                                uiRegRead |= (1<<17);
 
                                status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
-                               if (status) {
-                                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
+                               if (status)
                                        return status;
-                               }
-
                        }
                        SendIdleModeResponse(Adapter);
                }
        } else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
-               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
                OverrideServiceFlowParams(Adapter, puiBuffer);
        }
        return status;
@@ -147,11 +127,8 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
        struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;
 
        /* Abort Bus suspend if its already suspended */
-       if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
+       if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend))
                status = usb_autopm_get_interface(psInterfaceAdapter->interface);
-               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status);
-
-       }
 
        if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
                                                                        ||
@@ -159,20 +136,15 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
                /* write the SW abort pattern. */
                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
                status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
-               if (status) {
-                               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
-                               return status;
-               }
+               if (status)
+                       return status;
        }
 
        if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
                value = 0x80000000;
                status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
                if (status)
-               {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
                        return status;
-               }
        } else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
                /*
                 * Get a Interrupt Out URB and send 8 Bytes Down
@@ -186,12 +158,10 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
                        8,
                        &lenwritten,
                        5000);
-               if (status) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status);
+               if (status)
                        return status;
-               } else {
+               else
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
-               }
 
                /* mdelay(25); */
 
@@ -210,10 +180,8 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr);
 
                status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
-               if (status) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
+               if (status)
                        return status;
-               }
        }
        return status;
 }
@@ -223,7 +191,6 @@ int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
        if (Adapter->bTriedToWakeUpFromlowPowerMode) {
                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
        } else {
-               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n");
                Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
                InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern);
 
@@ -241,10 +208,8 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
                /* clear idlemode interrupt. */
                uiRegVal = 0;
                Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
-               if (Status) {
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
+               if (Status)
                        return;
-               }
        }
 
     else {
@@ -253,14 +218,12 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
                bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
                if (bytes < 0) {
                        Status = bytes;
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
                        return;
                }
 
                bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
                if (bytes < 0) {
                        Status = bytes;
-                       BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
                        return;
                }
        }