}
EXPORT_SYMBOL_GPL(iwl_mac_tx_last_beacon);
-static int iwl_set_mode(struct iwl_priv *priv, struct ieee80211_vif *vif)
+static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
- struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
iwl_connection_init_rx_config(priv, ctx);
if (priv->cfg->ops->hcmd->set_rxon_chain)
return iwlcore_commit_rxon(priv, ctx);
}
+static int iwl_setup_interface(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ struct ieee80211_vif *vif = ctx->vif;
+ int err;
+
+ lockdep_assert_held(&priv->mutex);
+
+ /*
+ * This variable will be correct only when there's just
+ * a single context, but all code using it is for hardware
+ * that supports only one context.
+ */
+ priv->iw_mode = vif->type;
+
+ ctx->is_active = true;
+
+ err = iwl_set_mode(priv, ctx);
+ if (err) {
+ if (!ctx->always_active)
+ ctx->is_active = false;
+ return err;
+ }
+
+ if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist &&
+ vif->type == NL80211_IFTYPE_ADHOC) {
+ /*
+ * pretend to have high BT traffic as long as we
+ * are operating in IBSS mode, as this will cause
+ * the rate scaling etc. to behave as intended.
+ */
+ priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
+ }
+
+ return 0;
+}
+
int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *tmp, *ctx = NULL;
- int err = 0;
+ int err;
IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n",
vif->type, vif->addr);
vif_priv->ctx = ctx;
ctx->vif = vif;
- /*
- * This variable will be correct only when there's just
- * a single context, but all code using it is for hardware
- * that supports only one context.
- */
- priv->iw_mode = vif->type;
-
- ctx->is_active = true;
-
- err = iwl_set_mode(priv, vif);
- if (err) {
- if (!ctx->always_active)
- ctx->is_active = false;
- goto out_err;
- }
-
- if (priv->cfg->bt_params &&
- priv->cfg->bt_params->advanced_bt_coexist &&
- vif->type == NL80211_IFTYPE_ADHOC) {
- /*
- * pretend to have high BT traffic as long as we
- * are operating in IBSS mode, as this will cause
- * the rate scaling etc. to behave as intended.
- */
- priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
- }
- goto out;
+ err = iwl_setup_interface(priv, ctx);
+ if (!err)
+ goto out;
- out_err:
ctx->vif = NULL;
priv->iw_mode = NL80211_IFTYPE_STATION;
out:
}
EXPORT_SYMBOL(iwl_mac_add_interface);
-void iwl_mac_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
+static void iwl_teardown_interface(struct iwl_priv *priv,
+ struct ieee80211_vif *vif,
+ bool mode_change)
{
- struct iwl_priv *priv = hw->priv;
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
- IWL_DEBUG_MAC80211(priv, "enter\n");
-
- mutex_lock(&priv->mutex);
-
- WARN_ON(ctx->vif != vif);
- ctx->vif = NULL;
+ lockdep_assert_held(&priv->mutex);
if (priv->scan_vif == vif) {
iwl_scan_cancel_timeout(priv, 200);
iwl_force_scan_end(priv);
}
- iwl_set_mode(priv, vif);
- if (!ctx->always_active)
- ctx->is_active = false;
+ if (!mode_change) {
+ iwl_set_mode(priv, ctx);
+ if (!ctx->always_active)
+ ctx->is_active = false;
+ }
/*
* When removing the IBSS interface, overwrite the
*/
if (vif->type == NL80211_IFTYPE_ADHOC)
priv->bt_traffic_load = priv->notif_bt_traffic_load;
+}
+
+void iwl_mac_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct iwl_priv *priv = hw->priv;
+ struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+
+ IWL_DEBUG_MAC80211(priv, "enter\n");
+
+ mutex_lock(&priv->mutex);
+
+ WARN_ON(ctx->vif != vif);
+ ctx->vif = NULL;
+
+ iwl_teardown_interface(priv, vif, false);
memset(priv->bssid, 0, ETH_ALEN);
mutex_unlock(&priv->mutex);
return 0;
}
+int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ enum nl80211_iftype newtype, bool newp2p)
+{
+ struct iwl_priv *priv = hw->priv;
+ struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+ struct iwl_rxon_context *tmp;
+ u32 interface_modes;
+ int err;
+
+ newtype = ieee80211_iftype_p2p(newtype, newp2p);
+
+ mutex_lock(&priv->mutex);
+
+ interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
+
+ if (!(interface_modes & BIT(newtype))) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ if (ctx->exclusive_interface_modes & BIT(newtype)) {
+ for_each_context(priv, tmp) {
+ if (ctx == tmp)
+ continue;
+
+ if (!tmp->vif)
+ continue;
+
+ /*
+ * The current mode switch would be exclusive, but
+ * another context is active ... refuse the switch.
+ */
+ err = -EBUSY;
+ goto out;
+ }
+ }
+
+ /* success */
+ iwl_teardown_interface(priv, vif, true);
+ vif->type = newtype;
+ err = iwl_setup_interface(priv, ctx);
+ WARN_ON(err);
+ /*
+ * We've switched internally, but submitting to the
+ * device may have failed for some reason. Mask this
+ * error, because otherwise mac80211 will not switch
+ * (and set the interface type back) and we'll be
+ * out of sync with it.
+ */
+ err = 0;
+
+ out:
+ mutex_unlock(&priv->mutex);
+ return err;
+}
+EXPORT_SYMBOL(iwl_mac_change_interface);
+
/**
* iwl_bg_monitor_recover - Timer callback to check for stuck queue and recover
*
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff