Blackfin: bf537-stamp: add resources for AD1938 audio card

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index d619313b1a714214a3328ac21ad3488a5929d89c..b9da9790a4445bda8a289bb2ca965e77a58bc72a 100644 (file)
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -524,6 +524,15 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) \
+       || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
+       .enable_dma = 0,
+       .bits_per_word = 8,
+       .cs_gpio = GPIO_PF5,
+};
+#endif
+
 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
        .enable_dma = 0,
@@ -754,6 +763,18 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &ad1836_spi_chip_info,
        },
 #endif
+
+#if defined(CONFIG_SND_BF5XX_SOC_AD1938) || defined(CONFIG_SND_BF5XX_SOC_AD1938_MODULE)
+       {
+               .modalias = "ad1938-spi",
+               .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+               .chip_select = 0,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
+               .controller_data = &ad1938_spi_chip_info,
+               .mode = SPI_MODE_3,
+       },
+#endif
+
 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
        {
                .modalias = "ad9960-spi",