arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values

The latter are error-prone because the bank number is one less than one
would read in the documentation.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Eric Benard <eric@eukrea.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 14a5ffc939ad96a78ded2c34ebb3f7fd8dffe59b..80761474c0f873887e42eb8610c4f8190b47daba 100644 (file)
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -165,8 +165,8 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
        MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
-#define GPIO_LED1      (2 * 32 + 29)
-#define GPIO_SWITCH1   (2 * 32 + 25)
+#define GPIO_LED1      IMX_GPIO_NR(3, 29)
+#define GPIO_SWITCH1   IMX_GPIO_NR(3, 25)
 #define GPIO_LCDPWR    (4)
 
 static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,

diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 6db0520e8794ae00df86fa59696f2c56769b2a16..a42f1a98f1a23c70ad5ddad5ed10678cf462be0d 100644 (file)
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -60,7 +60,7 @@ static struct tsc2007_platform_data tsc2007_info = {
        .x_plate_ohms           = 180,
 };
 
-#define TSC2007_IRQGPIO                (2 * 32 + 2)
+#define TSC2007_IRQGPIO                IMX_GPIO_NR(3, 2)
 static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
        {
                I2C_BOARD_INFO("pcf8563", 0x51),

diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 6c662c73aaa3635ce80672ee58f81a10010b5b06..262af17db44c60d58be0ff656a62c2b4ab34e23b 100644 (file)
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -219,9 +219,9 @@ static iomux_v3_cfg_t pcm043_pads[] = {
        MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
-#define AC97_GPIO_TXFS (1 * 32 + 31)
-#define AC97_GPIO_TXD  (1 * 32 + 28)
-#define AC97_GPIO_RESET        (1 * 32 + 0)
+#define AC97_GPIO_TXFS IMX_GPIO_NR(2, 31)
+#define AC97_GPIO_TXD  IMX_GPIO_NR(2, 28)
+#define AC97_GPIO_RESET        IMX_GPIO_NR(2, 0)
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {