hwmon: (gl518sm) Avoid forward declaration

Reorder functions to avoid forward declaration.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 1e9830513045e5bb0ecf145170904a5b24352e0c..0307d8218f872211f96330caf08de44a1fdad055 100644 (file)
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -137,33 +137,98 @@ struct gl518_data {
        u8 beep_enable;         /* Boolean */
 };
 
-static int gl518_probe(struct i2c_client *client,
-                      const struct i2c_device_id *id);
-static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info);
-static void gl518_init_client(struct i2c_client *client);
-static int gl518_remove(struct i2c_client *client);
-static int gl518_read_value(struct i2c_client *client, u8 reg);
-static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
-static struct gl518_data *gl518_update_device(struct device *dev);
+/*
+ * Registers 0x07 to 0x0c are word-sized, others are byte-sized
+ * GL518 uses a high-byte first convention, which is exactly opposite to
+ * the SMBus standard.
+ */
+static int gl518_read_value(struct i2c_client *client, u8 reg)
+{
+       if ((reg >= 0x07) && (reg <= 0x0c))
+               return i2c_smbus_read_word_swapped(client, reg);
+       else
+               return i2c_smbus_read_byte_data(client, reg);
+}
 
-static const struct i2c_device_id gl518_id[] = {
-       { "gl518sm", 0 },
-       { }
-};
-MODULE_DEVICE_TABLE(i2c, gl518_id);
+static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
+{
+       if ((reg >= 0x07) && (reg <= 0x0c))
+               return i2c_smbus_write_word_swapped(client, reg, value);
+       else
+               return i2c_smbus_write_byte_data(client, reg, value);
+}
 
-/* This is the driver that will be inserted */
-static struct i2c_driver gl518_driver = {
-       .class          = I2C_CLASS_HWMON,
-       .driver = {
-               .name   = "gl518sm",
-       },
-       .probe          = gl518_probe,
-       .remove         = gl518_remove,
-       .id_table       = gl518_id,
-       .detect         = gl518_detect,
-       .address_list   = normal_i2c,
-};
+static struct gl518_data *gl518_update_device(struct device *dev)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct gl518_data *data = i2c_get_clientdata(client);
+       int val;
+
+       mutex_lock(&data->update_lock);
+
+       if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+           || !data->valid) {
+               dev_dbg(&client->dev, "Starting gl518 update\n");
+
+               data->alarms = gl518_read_value(client, GL518_REG_INT);
+               data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
+
+               val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
+               data->voltage_min[0] = val & 0xff;
+               data->voltage_max[0] = (val >> 8) & 0xff;
+               val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
+               data->voltage_min[1] = val & 0xff;
+               data->voltage_max[1] = (val >> 8) & 0xff;
+               val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
+               data->voltage_min[2] = val & 0xff;
+               data->voltage_max[2] = (val >> 8) & 0xff;
+               val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
+               data->voltage_min[3] = val & 0xff;
+               data->voltage_max[3] = (val >> 8) & 0xff;
+
+               val = gl518_read_value(client, GL518_REG_FAN_COUNT);
+               data->fan_in[0] = (val >> 8) & 0xff;
+               data->fan_in[1] = val & 0xff;
+
+               val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
+               data->fan_min[0] = (val >> 8) & 0xff;
+               data->fan_min[1] = val & 0xff;
+
+               data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
+               data->temp_max =
+                   gl518_read_value(client, GL518_REG_TEMP_MAX);
+               data->temp_hyst =
+                   gl518_read_value(client, GL518_REG_TEMP_HYST);
+
+               val = gl518_read_value(client, GL518_REG_MISC);
+               data->fan_div[0] = (val >> 6) & 0x03;
+               data->fan_div[1] = (val >> 4) & 0x03;
+               data->fan_auto1  = (val >> 3) & 0x01;
+
+               data->alarms &= data->alarm_mask;
+
+               val = gl518_read_value(client, GL518_REG_CONF);
+               data->beep_enable = (val >> 2) & 1;
+
+               if (data->type != gl518sm_r00) {
+                       data->voltage_in[0] =
+                           gl518_read_value(client, GL518_REG_VDD);
+                       data->voltage_in[1] =
+                           gl518_read_value(client, GL518_REG_VIN1);
+                       data->voltage_in[2] =
+                           gl518_read_value(client, GL518_REG_VIN2);
+               }
+               data->voltage_in[3] =
+                   gl518_read_value(client, GL518_REG_VIN3);
+
+               data->last_updated = jiffies;
+               data->valid = 1;
+       }
+
+       mutex_unlock(&data->update_lock);
+
+       return data;
+}
 
 /*
  * Sysfs stuff
@@ -539,6 +604,26 @@ static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info)
        return 0;
 }
 
+/*
+ * Called when we have found a new GL518SM.
+ * Note that we preserve D4:NoFan2 and D2:beep_enable.
+ */
+static void gl518_init_client(struct i2c_client *client)
+{
+       /* Make sure we leave D7:Reset untouched */
+       u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
+
+       /* Comparator mode (D3=0), standby mode (D6=0) */
+       gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
+
+       /* Never interrupts */
+       gl518_write_value(client, GL518_REG_MASK, 0x00);
+
+       /* Clear status register (D5=1), start (D6=1) */
+       gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
+       gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
+}
+
 static int gl518_probe(struct i2c_client *client,
                       const struct i2c_device_id *id)
 {
@@ -584,27 +669,6 @@ exit_remove_files:
        return err;
 }
 
-
-/*
- * Called when we have found a new GL518SM.
- * Note that we preserve D4:NoFan2 and D2:beep_enable.
- */
-static void gl518_init_client(struct i2c_client *client)
-{
-       /* Make sure we leave D7:Reset untouched */
-       u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
-
-       /* Comparator mode (D3=0), standby mode (D6=0) */
-       gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
-
-       /* Never interrupts */
-       gl518_write_value(client, GL518_REG_MASK, 0x00);
-
-       /* Clear status register (D5=1), start (D6=1) */
-       gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
-       gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
-}
-
 static int gl518_remove(struct i2c_client *client)
 {
        struct gl518_data *data = i2c_get_clientdata(client);
@@ -617,98 +681,23 @@ static int gl518_remove(struct i2c_client *client)
        return 0;
 }
 
-/*
- * Registers 0x07 to 0x0c are word-sized, others are byte-sized
- * GL518 uses a high-byte first convention, which is exactly opposite to
- * the SMBus standard.
- */
-static int gl518_read_value(struct i2c_client *client, u8 reg)
-{
-       if ((reg >= 0x07) && (reg <= 0x0c))
-               return i2c_smbus_read_word_swapped(client, reg);
-       else
-               return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
-       if ((reg >= 0x07) && (reg <= 0x0c))
-               return i2c_smbus_write_word_swapped(client, reg, value);
-       else
-               return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-static struct gl518_data *gl518_update_device(struct device *dev)
-{
-       struct i2c_client *client = to_i2c_client(dev);
-       struct gl518_data *data = i2c_get_clientdata(client);
-       int val;
-
-       mutex_lock(&data->update_lock);
-
-       if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
-           || !data->valid) {
-               dev_dbg(&client->dev, "Starting gl518 update\n");
-
-               data->alarms = gl518_read_value(client, GL518_REG_INT);
-               data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
-
-               val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
-               data->voltage_min[0] = val & 0xff;
-               data->voltage_max[0] = (val >> 8) & 0xff;
-               val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
-               data->voltage_min[1] = val & 0xff;
-               data->voltage_max[1] = (val >> 8) & 0xff;
-               val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
-               data->voltage_min[2] = val & 0xff;
-               data->voltage_max[2] = (val >> 8) & 0xff;
-               val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
-               data->voltage_min[3] = val & 0xff;
-               data->voltage_max[3] = (val >> 8) & 0xff;
-
-               val = gl518_read_value(client, GL518_REG_FAN_COUNT);
-               data->fan_in[0] = (val >> 8) & 0xff;
-               data->fan_in[1] = val & 0xff;
-
-               val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
-               data->fan_min[0] = (val >> 8) & 0xff;
-               data->fan_min[1] = val & 0xff;
-
-               data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
-               data->temp_max =
-                   gl518_read_value(client, GL518_REG_TEMP_MAX);
-               data->temp_hyst =
-                   gl518_read_value(client, GL518_REG_TEMP_HYST);
-
-               val = gl518_read_value(client, GL518_REG_MISC);
-               data->fan_div[0] = (val >> 6) & 0x03;
-               data->fan_div[1] = (val >> 4) & 0x03;
-               data->fan_auto1  = (val >> 3) & 0x01;
-
-               data->alarms &= data->alarm_mask;
-
-               val = gl518_read_value(client, GL518_REG_CONF);
-               data->beep_enable = (val >> 2) & 1;
-
-               if (data->type != gl518sm_r00) {
-                       data->voltage_in[0] =
-                           gl518_read_value(client, GL518_REG_VDD);
-                       data->voltage_in[1] =
-                           gl518_read_value(client, GL518_REG_VIN1);
-                       data->voltage_in[2] =
-                           gl518_read_value(client, GL518_REG_VIN2);
-               }
-               data->voltage_in[3] =
-                   gl518_read_value(client, GL518_REG_VIN3);
-
-               data->last_updated = jiffies;
-               data->valid = 1;
-       }
-
-       mutex_unlock(&data->update_lock);
+static const struct i2c_device_id gl518_id[] = {
+       { "gl518sm", 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, gl518_id);
 
-       return data;
-}
+static struct i2c_driver gl518_driver = {
+       .class          = I2C_CLASS_HWMON,
+       .driver = {
+               .name   = "gl518sm",
+       },
+       .probe          = gl518_probe,
+       .remove         = gl518_remove,
+       .id_table       = gl518_id,
+       .detect         = gl518_detect,
+       .address_list   = normal_i2c,
+};
 
 module_i2c_driver(gl518_driver);