[POWERPC] Put mpc52xx support file in platforms/52xx

platforms/embedded6xx is probably going away, and 52xx boards need
some extra support the 52xx interrupt controller and DMA engine
anyway.  It makes sense to group all the 52xx bits into a single path.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 836caf1e943968170eb3a691de3862f4e01e28e9..a6bc221ad1b0c47e69daec7c8b988cc6c095e57e 100644 (file)
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -410,6 +410,10 @@ config PPC_CHRP
        select PPC_NATIVE
        default y
 
+config PPC_MPC52xx
+       bool
+       default n
+
 config PPC_EFIKA
        bool "bPlan Efika 5k2. MPC5200B based computer"
        depends on PPC_MULTIPLATFORM && PPC32

diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 234a861870a86672562ff07d3f37fb2f84fd5986..910d50a8333a59a520bc0baeee4a89b8d1f83f0d 100644 (file)
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -146,15 +146,6 @@ config PQ2FADS
          Select PQ2FADS if you wish to configure for a Freescale
          PQ2FADS board (-VR or -ZU).
 
-config LITE5200
-       bool "Freescale LITE5200 / (IceCube)"
-       select PPC_MPC52xx
-       help
-         Support for the LITE5200 dev board for the MPC5200 from Freescale.
-         This is for the LITE5200 version 2.0 board. Don't know if it changes
-         much but it's only been tested on this board version. I think this
-         board is also known as IceCube.
-
 config EV64360
        bool "Marvell-EV64360BP"
        help
@@ -172,9 +163,6 @@ config TQM8xxL
        depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
        default y
 
-config PPC_MPC52xx
-       bool
-
 config 8260
        bool "CPM2 Support" if WILLOW
        depends on 6xx