u32 off;
struct pci_dev *pdev = adapter->pdev;
- /* resetall */
+ QLCWR32(adapter, CRB_CMDPEG_STATE, 0);
+ QLCWR32(adapter, CRB_RCVPEG_STATE, 0);
+
qlcnic_rom_lock(adapter);
QLCWR32(adapter, QLCNIC_ROMUSB_GLB_SW_RESET, 0xfeffffff);
qlcnic_rom_unlock(adapter);
+ /* Init HW CRB block */
if (qlcnic_rom_fast_read(adapter, 0, &n) != 0 || (n != 0xcafecafe) ||
qlcnic_rom_fast_read(adapter, 4, &n) != 0) {
dev_err(&pdev->dev, "ERROR Reading crb_init area: val:%x\n", n);
}
kfree(buf);
- /* p2dn replyCount */
+ /* Initialize protocol process engine */
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_D + 0xec, 0x1e);
- /* disable_peg_cache 0 & 1*/
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_D + 0x4c, 8);
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_I + 0x4c, 8);
-
- /* peg_clr_all */
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_0 + 0x8, 0);
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_0 + 0xc, 0);
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_1 + 0x8, 0);
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_2 + 0xc, 0);
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_3 + 0x8, 0);
QLCWR32(adapter, QLCNIC_CRB_PEG_NET_3 + 0xc, 0);
+ QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x8, 0);
+ QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0xc, 0);
+ msleep(1);
+ QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0);
+ QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0);
return 0;
}
+int
+qlcnic_check_fw_status(struct qlcnic_adapter *adapter)
+{
+ u32 heartbit, ret = -EIO;
+ int retries = QLCNIC_HEARTBEAT_RETRY_COUNT;
+
+ adapter->heartbit = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER);
+ do {
+ msleep(QLCNIC_HEARTBEAT_PERIOD_MSECS);
+ heartbit = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER);
+ if (heartbit != adapter->heartbit) {
+ /* Complete firmware handshake */
+ QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
+ ret = QLCNIC_RCODE_SUCCESS;
+ break;
+ }
+ } while (--retries);
+
+ return ret;
+}
+
int
qlcnic_setup_idc_param(struct qlcnic_adapter *adapter) {
int
qlcnic_need_fw_reset(struct qlcnic_adapter *adapter)
{
- u32 count, old_count;
u32 val, version, major, minor, build;
- int i, timeout;
if (adapter->need_fw_reset)
return 1;
- /* last attempt had failed */
- if (QLCRD32(adapter, CRB_CMDPEG_STATE) == PHAN_INITIALIZE_FAILED)
- return 1;
-
- old_count = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER);
-
- for (i = 0; i < 10; i++) {
-
- timeout = msleep_interruptible(200);
- if (timeout) {
- QLCWR32(adapter, CRB_CMDPEG_STATE,
- PHAN_INITIALIZE_FAILED);
- return -EINTR;
- }
-
- count = QLCRD32(adapter, QLCNIC_PEG_ALIVE_COUNTER);
- if (count != old_count)
- break;
- }
-
- /* firmware is dead */
- if (count == old_count)
+ if (qlcnic_check_fw_status(adapter))
return 1;
/* check if we have got newer or different file firmware */
adapter->fw = NULL;
}
-static int qlcnic_cmd_peg_ready(struct qlcnic_adapter *adapter)
-{
- u32 val;
- int retries = 60;
-
- do {
- val = QLCRD32(adapter, CRB_CMDPEG_STATE);
-
- switch (val) {
- case PHAN_INITIALIZE_COMPLETE:
- case PHAN_INITIALIZE_ACK:
- return 0;
- case PHAN_INITIALIZE_FAILED:
- goto out_err;
- default:
- break;
- }
-
- msleep(500);
-
- } while (--retries);
-
- QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED);
-
-out_err:
- dev_err(&adapter->pdev->dev, "Command Peg initialization not "
- "complete, state: 0x%x.\n", val);
- return -EIO;
-}
-
-static int
-qlcnic_receive_peg_ready(struct qlcnic_adapter *adapter)
-{
- u32 val;
- int retries = 2000;
-
- do {
- val = QLCRD32(adapter, CRB_RCVPEG_STATE);
-
- if (val == PHAN_PEG_RCV_INITIALIZED)
- return 0;
-
- msleep(10);
-
- } while (--retries);
-
- if (!retries) {
- dev_err(&adapter->pdev->dev, "Receive Peg initialization not "
- "complete, state: 0x%x.\n", val);
- return -EIO;
- }
-
- return 0;
-}
-
-int qlcnic_init_firmware(struct qlcnic_adapter *adapter)
-{
- int err;
-
- err = qlcnic_cmd_peg_ready(adapter);
- if (err)
- return err;
-
- err = qlcnic_receive_peg_ready(adapter);
- if (err)
- return err;
-
- QLCWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_ACK);
-
- return err;
-}
-
static void
qlcnic_handle_linkevent(struct qlcnic_adapter *adapter,
struct qlcnic_fw_msg *msg)
static int
qlcnic_start_firmware(struct qlcnic_adapter *adapter)
{
- int val, err, first_boot;
+ int err;
err = qlcnic_can_start_firmware(adapter);
if (err < 0)
return err;
else if (!err)
- goto wait_init;
-
- first_boot = QLCRD32(adapter, QLCNIC_CAM_RAM(0x1fc));
- if (first_boot == 0x55555555)
- /* This is the first boot after power up */
- QLCWR32(adapter, QLCNIC_CAM_RAM(0x1fc), QLCNIC_BDINFO_MAGIC);
+ goto check_fw_status;
if (load_fw_file)
qlcnic_request_firmware(adapter);
}
err = qlcnic_need_fw_reset(adapter);
- if (err < 0)
- goto err_out;
if (err == 0)
- goto wait_init;
-
- if (first_boot != 0x55555555) {
- QLCWR32(adapter, CRB_CMDPEG_STATE, 0);
- QLCWR32(adapter, CRB_RCVPEG_STATE, 0);
- qlcnic_pinit_from_rom(adapter);
- msleep(1);
- }
-
- QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS1, 0);
- QLCWR32(adapter, QLCNIC_PEG_HALT_STATUS2, 0);
+ goto set_dev_ready;
+ err = qlcnic_pinit_from_rom(adapter);
+ if (err)
+ goto err_out;
qlcnic_set_port_mode(adapter);
err = qlcnic_load_firmware(adapter);
goto err_out;
qlcnic_release_firmware(adapter);
+ QLCWR32(adapter, CRB_DRIVER_VERSION, QLCNIC_DRIVER_VERSION);
- val = (_QLCNIC_LINUX_MAJOR << 16)
- | ((_QLCNIC_LINUX_MINOR << 8))
- | (_QLCNIC_LINUX_SUBVERSION);
- QLCWR32(adapter, CRB_DRIVER_VERSION, val);
-
-wait_init:
- /* Handshake with the card before we register the devices. */
- err = qlcnic_init_firmware(adapter);
+check_fw_status:
+ err = qlcnic_check_fw_status(adapter);
if (err)
goto err_out;
+set_dev_ready:
QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_READY);
qlcnic_idc_debug_info(adapter, 1);
err = qlcnic_check_npar_opertional(adapter);