Input: pmic8xxx-keypad - fix build by removing gpio configuration
authorStephen Boyd <sboyd@codeaurora.org>
Sat, 29 Mar 2014 19:32:06 +0000 (12:32 -0700)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Sun, 30 Mar 2014 20:25:17 +0000 (13:25 -0700)
The gpio configuration in this driver doesn't work because the
gpio.h include doesn't exist. Remove the configuration as it
isn't strictly necessary, allowing us to actually compile this
driver. If it's needed in the future, it should be done via a
pinctrl driver.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
drivers/input/keyboard/pmic8xxx-keypad.c

index 2c9f19ac35ea098a4749ded573c20c3f53d7bc34..c4aa882c8fb96ae29f9b9da1fab1c151c4e8e091 100644 (file)
@@ -21,7 +21,6 @@
 #include <linux/mutex.h>
 
 #include <linux/mfd/pm8xxx/core.h>
-#include <linux/mfd/pm8xxx/gpio.h>
 #include <linux/input/pmic8xxx-keypad.h>
 
 #define PM8XXX_MAX_ROWS                18
@@ -447,27 +446,6 @@ static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp)
 
 }
 
-static int  pmic8xxx_kp_config_gpio(int gpio_start, int num_gpios,
-                       struct pmic8xxx_kp *kp, struct pm_gpio *gpio_config)
-{
-       int     rc, i;
-
-       if (gpio_start < 0 || num_gpios < 0)
-               return -EINVAL;
-
-       for (i = 0; i < num_gpios; i++) {
-               rc = pm8xxx_gpio_config(gpio_start + i, gpio_config);
-               if (rc) {
-                       dev_err(kp->dev, "%s: FAIL pm8xxx_gpio_config():"
-                                       "for PM GPIO [%d] rc=%d.\n",
-                                       __func__, gpio_start + i, rc);
-                       return rc;
-               }
-        }
-
-       return 0;
-}
-
 static int pmic8xxx_kp_enable(struct pmic8xxx_kp *kp)
 {
        int rc;
@@ -527,27 +505,6 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
        int rc;
        u8 ctrl_val;
 
-       struct pm_gpio kypd_drv = {
-               .direction      = PM_GPIO_DIR_OUT,
-               .output_buffer  = PM_GPIO_OUT_BUF_OPEN_DRAIN,
-               .output_value   = 0,
-               .pull           = PM_GPIO_PULL_NO,
-               .vin_sel        = PM_GPIO_VIN_S3,
-               .out_strength   = PM_GPIO_STRENGTH_LOW,
-               .function       = PM_GPIO_FUNC_1,
-               .inv_int_pol    = 1,
-       };
-
-       struct pm_gpio kypd_sns = {
-               .direction      = PM_GPIO_DIR_IN,
-               .pull           = PM_GPIO_PULL_UP_31P5,
-               .vin_sel        = PM_GPIO_VIN_S3,
-               .out_strength   = PM_GPIO_STRENGTH_NO,
-               .function       = PM_GPIO_FUNC_NORMAL,
-               .inv_int_pol    = 1,
-       };
-
-
        if (!pdata || !pdata->num_cols || !pdata->num_rows ||
                pdata->num_cols > PM8XXX_MAX_COLS ||
                pdata->num_rows > PM8XXX_MAX_ROWS ||
@@ -653,20 +610,6 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
                goto err_get_irq;
        }
 
-       rc = pmic8xxx_kp_config_gpio(pdata->cols_gpio_start,
-                                       pdata->num_cols, kp, &kypd_sns);
-       if (rc < 0) {
-               dev_err(&pdev->dev, "unable to configure keypad sense lines\n");
-               goto err_gpio_config;
-       }
-
-       rc = pmic8xxx_kp_config_gpio(pdata->rows_gpio_start,
-                                       pdata->num_rows, kp, &kypd_drv);
-       if (rc < 0) {
-               dev_err(&pdev->dev, "unable to configure keypad drive lines\n");
-               goto err_gpio_config;
-       }
-
        rc = request_any_context_irq(kp->key_sense_irq, pmic8xxx_kp_irq,
                                 IRQF_TRIGGER_RISING, "pmic-keypad", kp);
        if (rc < 0) {
@@ -703,7 +646,6 @@ err_pmic_reg_read:
        free_irq(kp->key_stuck_irq, kp);
 err_req_stuck_irq:
        free_irq(kp->key_sense_irq, kp);
-err_gpio_config:
 err_get_irq:
        input_free_device(kp->input);
 err_alloc_device: