PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver
authorLinus Walleij <linus.walleij@linaro.org>
Sun, 12 Mar 2017 22:24:03 +0000 (23:24 +0100)
committerBjorn Helgaas <bhelgaas@google.com>
Fri, 24 Mar 2017 15:31:17 +0000 (10:31 -0500)
Add a host bridge driver for the Faraday Technology FPPCI100 host bridge,
used for Cortina Systems Gemini SoC (SL3516) PCI Host Bridge.

This code is inspired by the out-of-tree OpenWRT patch and then extensively
rewritten for device tree and using the modern helpers to cut down and
modernize the code to all new PCI frameworks.  A driver exists in U-Boot as
well.

Tested on the ITian Square One SQ201 NAS with the following result in the
boot log (trimmed to relevant parts):

  OF: PCI: host bridge /soc/pci@50000000 ranges:
  OF: PCI:    IO 0x50000000..0x500fffff -> 0x00000000
  OF: PCI:   MEM 0x58000000..0x5fffffff -> 0x58000000
  ftpci100 50000000.pci: PCI host bridge to bus 0000:00
  pci_bus 0000:00: root bus resource [bus 00-ff]
  pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]
  pci_bus 0000:00: root bus resource [mem 0x58000000-0x5fffffff]
  ftpci100 50000000.pci:
    DMA MEM1 BASE: 0x0000000000000000 -> 0x0000000007ffffff config 00070000
  ftpci100 50000000.pci:
    DMA MEM2 BASE: 0x0000000000000000 -> 0x0000000003ffffff config 00060000
  ftpci100 50000000.pci:
    DMA MEM3 BASE: 0x0000000000000000 -> 0x0000000003ffffff config 00060000
  PCI: bus0: Fast back to back transfers disabled
  pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
  pci 0000:00:0c.0: BAR 0: assigned [mem 0x58000000-0x58007fff]
  pci 0000:00:09.2: BAR 0: assigned [mem 0x58008000-0x580080ff]
  pci 0000:00:09.0: BAR 4: assigned [io  0x1000-0x101f]
  pci 0000:00:09.1: BAR 4: assigned [io  0x1020-0x103f]
  pci 0000:00:09.0: enabling device (0140 -> 0141)
  pci 0000:00:09.0: HCRESET not completed yet!
  pci 0000:00:09.1: enabling device (0140 -> 0141)
  pci 0000:00:09.1: HCRESET not completed yet!
  pci 0000:00:09.2: enabling device (0140 -> 0142)
  rt61pci 0000:00:0c.0: enabling device (0140 -> 0142)
  ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected -
     rt: 2561, rf: 0003, rev: 000c
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  ehci-pci 0000:00:09.2: EHCI Host Controller
  ehci-pci 0000:00:09.2: new USB bus registered, assigned bus number 1
  ehci-pci 0000:00:09.2: irq 125, io mem 0x58008000
  ehci-pci 0000:00:09.2: USB 2.0 started, EHCI 1.00
  hub 1-0:1.0: USB hub found
  hub 1-0:1.0: 4 ports detected
  uhci_hcd: USB Universal Host Controller Interface driver
  uhci_hcd 0000:00:09.0: UHCI Host Controller
  uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
  uhci_hcd 0000:00:09.0: HCRESET not completed yet!
  uhci_hcd 0000:00:09.0: irq 123, io base 0x00001000
  hub 2-0:1.0: USB hub found
  hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  uhci_hcd 0000:00:09.1: UHCI Host Controller
  uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3
  uhci_hcd 0000:00:09.1: HCRESET not completed yet!
  uhci_hcd 0000:00:09.1: irq 124, io base 0x00001020
  hub 3-0:1.0: USB hub found
  hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
  scsi 0:0:0:0: Direct-Access     USB      Flash Disk       1.00 PQ: 0 ANSI: 2
  sd 0:0:0:0: [sda] 7900336 512-byte logical blocks: (4.04 GB/3.77 GiB)
  sd 0:0:0:0: [sda] Write Protect is off
  sd 0:0:0:0: [sda] No Caching mode page found
  sd 0:0:0:0: [sda] Assuming drive cache: write through
   sda: sda1 sda2 sda3
  sd 0:0:0:0: [sda] Attached SCSI removable disk
  ieee80211 phy0: rt2x00lib_request_firmware: Info -
     Loading firmware file 'rt2561s.bin'
  ieee80211 phy0: rt2x00lib_request_firmware: Info -
     Firmware detected - version: 0.8
  IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

  $ lspci
  00:00.0 Class 0600: 159b:4321
  00:09.2 Class 0c03: 1106:3104
  00:09.0 Class 0c03: 1106:3038
  00:09.1 Class 0c03: 1106:3038
  00:0c.0 Class 0280: 1814:0301

  $ cat /proc/interrupts
     CPU0
  123:          0       PCI   0 Edge      uhci_hcd:usb2
  124:          0       PCI   1 Edge      uhci_hcd:usb3
  125:        159       PCI   2 Edge      ehci_hcd:usb1
  126:       1082       PCI   3 Edge      rt61pci

  $ cat /proc/iomem
  50000000-500000ff : /soc/pci@50000000
  58000000-5fffffff : Gemini PCI MEM
    58000000-58007fff : 0000:00:0c.0
      58000000-58007fff : 0000:00:0c.0
    58008000-580080ff : 0000:00:09.2
      58008000-580080ff : ehci_hcd

The EHCI USB hub works fine; I can mount and manage files and the IRQs just
keep ticking up.  I can issue iwlist wlan0 scanning and see all the WLANs
here.  I don't have wpa_supplicant so have not tried connecting to them.

[bhelgaas: fold in %pap change from Arnd Bergmann <arnd@arndb.de>]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Janos Laube <janos.dev@gmail.com>
CC: Paulius Zaleckas <paulius.zaleckas@gmail.com>
CC: Hans Ulli Kroll <ulli.kroll@googlemail.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
CC: Feng-Hsin Chiang <john453@faraday-tech.com>
CC: Greentime Hu <green.hu@gmail.com>
drivers/pci/host/Kconfig
drivers/pci/host/Makefile
drivers/pci/host/pci-ftpci100.c [new file with mode: 0644]

index f7c1d4d5c665b5c2df520d2dfeabd4e80c6e224d..aa23b70d61eb5f7c85c8736fb76aa78d9b6fd5a8 100644 (file)
@@ -27,6 +27,12 @@ config PCIE_XILINX_NWL
         or End Point. The current option selection will only
         support root port enabling.
 
+config PCI_FTPCI100
+       bool "Faraday Technology FTPCI100 PCI controller"
+       depends on OF
+       depends on ARM
+       default ARCH_GEMINI
+
 config PCI_TEGRA
        bool "NVIDIA Tegra PCIe controller"
        depends on ARCH_TEGRA
index 4d3686676cc3c9ea21ae2e9933f4208631fc09d7..cab879578003f6c287adbbb058d00aab5d90ff99 100644 (file)
@@ -1,3 +1,4 @@
+obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
 obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
diff --git a/drivers/pci/host/pci-ftpci100.c b/drivers/pci/host/pci-ftpci100.c
new file mode 100644 (file)
index 0000000..c0f29d1
--- /dev/null
@@ -0,0 +1,562 @@
+/*
+ * Support for Faraday Technology FTPC100 PCI Controller
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the out-of-tree OpenWRT patch for Cortina Gemini:
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ * Copyright (C) 2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Based on SL2312 PCI controller code
+ * Storlink (C) 2003
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/bitops.h>
+#include <linux/irq.h>
+
+/*
+ * Special configuration registers directly in the first few words
+ * in I/O space.
+ */
+#define PCI_IOSIZE     0x00
+#define PCI_PROT       0x04 /* AHB protection */
+#define PCI_CTRL       0x08 /* PCI control signal */
+#define PCI_SOFTRST    0x10 /* Soft reset counter and response error enable */
+#define PCI_CONFIG     0x28 /* PCI configuration command register */
+#define PCI_DATA       0x2C
+
+#define FARADAY_PCI_PMC                        0x40 /* Power management control */
+#define FARADAY_PCI_PMCSR              0x44 /* Power management status */
+#define FARADAY_PCI_CTRL1              0x48 /* Control register 1 */
+#define FARADAY_PCI_CTRL2              0x4C /* Control register 2 */
+#define FARADAY_PCI_MEM1_BASE_SIZE     0x50 /* Memory base and size #1 */
+#define FARADAY_PCI_MEM2_BASE_SIZE     0x54 /* Memory base and size #2 */
+#define FARADAY_PCI_MEM3_BASE_SIZE     0x58 /* Memory base and size #3 */
+
+/* Bits 31..28 gives INTD..INTA status */
+#define PCI_CTRL2_INTSTS_SHIFT         28
+#define PCI_CTRL2_INTMASK_CMDERR       BIT(27)
+#define PCI_CTRL2_INTMASK_PARERR       BIT(26)
+/* Bits 25..22 masks INTD..INTA */
+#define PCI_CTRL2_INTMASK_SHIFT                22
+#define PCI_CTRL2_INTMASK_MABRT_RX     BIT(21)
+#define PCI_CTRL2_INTMASK_TABRT_RX     BIT(20)
+#define PCI_CTRL2_INTMASK_TABRT_TX     BIT(19)
+#define PCI_CTRL2_INTMASK_RETRY4       BIT(18)
+#define PCI_CTRL2_INTMASK_SERR_RX      BIT(17)
+#define PCI_CTRL2_INTMASK_PERR_RX      BIT(16)
+/* Bit 15 reserved */
+#define PCI_CTRL2_MSTPRI_REQ6          BIT(14)
+#define PCI_CTRL2_MSTPRI_REQ5          BIT(13)
+#define PCI_CTRL2_MSTPRI_REQ4          BIT(12)
+#define PCI_CTRL2_MSTPRI_REQ3          BIT(11)
+#define PCI_CTRL2_MSTPRI_REQ2          BIT(10)
+#define PCI_CTRL2_MSTPRI_REQ1          BIT(9)
+#define PCI_CTRL2_MSTPRI_REQ0          BIT(8)
+/* Bits 7..4 reserved */
+/* Bits 3..0 TRDYW */
+
+/*
+ * Memory configs:
+ * Bit 31..20 defines the PCI side memory base
+ * Bit 19..16 (4 bits) defines the size per below
+ */
+#define FARADAY_PCI_MEMBASE_MASK       0xfff00000
+#define FARADAY_PCI_MEMSIZE_1MB                0x0
+#define FARADAY_PCI_MEMSIZE_2MB                0x1
+#define FARADAY_PCI_MEMSIZE_4MB                0x2
+#define FARADAY_PCI_MEMSIZE_8MB                0x3
+#define FARADAY_PCI_MEMSIZE_16MB       0x4
+#define FARADAY_PCI_MEMSIZE_32MB       0x5
+#define FARADAY_PCI_MEMSIZE_64MB       0x6
+#define FARADAY_PCI_MEMSIZE_128MB      0x7
+#define FARADAY_PCI_MEMSIZE_256MB      0x8
+#define FARADAY_PCI_MEMSIZE_512MB      0x9
+#define FARADAY_PCI_MEMSIZE_1GB                0xa
+#define FARADAY_PCI_MEMSIZE_2GB                0xb
+#define FARADAY_PCI_MEMSIZE_SHIFT      16
+
+/*
+ * The DMA base is set to 0x0 for all memory segments, it reflects the
+ * fact that the memory of the host system starts at 0x0.
+ */
+#define FARADAY_PCI_DMA_MEM1_BASE      0x00000000
+#define FARADAY_PCI_DMA_MEM2_BASE      0x00000000
+#define FARADAY_PCI_DMA_MEM3_BASE      0x00000000
+
+/* Defines for PCI configuration command register */
+#define PCI_CONF_ENABLE                BIT(31)
+#define PCI_CONF_WHERE(r)      ((r) & 0xFC)
+#define PCI_CONF_BUS(b)                (((b) & 0xFF) << 16)
+#define PCI_CONF_DEVICE(d)     (((d) & 0x1F) << 11)
+#define PCI_CONF_FUNCTION(f)   (((f) & 0x07) << 8)
+
+/**
+ * struct faraday_pci_variant - encodes IP block differences
+ * @cascaded_irq: this host has cascaded IRQs from an interrupt controller
+ *     embedded in the host bridge.
+ */
+struct faraday_pci_variant {
+       bool cascaded_irq;
+};
+
+struct faraday_pci {
+       struct device *dev;
+       void __iomem *base;
+       struct irq_domain *irqdomain;
+       struct pci_bus *bus;
+};
+
+static int faraday_res_to_memcfg(resource_size_t mem_base,
+                                resource_size_t mem_size, u32 *val)
+{
+       u32 outval;
+
+       switch (mem_size) {
+       case SZ_1M:
+               outval = FARADAY_PCI_MEMSIZE_1MB;
+               break;
+       case SZ_2M:
+               outval = FARADAY_PCI_MEMSIZE_2MB;
+               break;
+       case SZ_4M:
+               outval = FARADAY_PCI_MEMSIZE_4MB;
+               break;
+       case SZ_8M:
+               outval = FARADAY_PCI_MEMSIZE_8MB;
+               break;
+       case SZ_16M:
+               outval = FARADAY_PCI_MEMSIZE_16MB;
+               break;
+       case SZ_32M:
+               outval = FARADAY_PCI_MEMSIZE_32MB;
+               break;
+       case SZ_64M:
+               outval = FARADAY_PCI_MEMSIZE_64MB;
+               break;
+       case SZ_128M:
+               outval = FARADAY_PCI_MEMSIZE_128MB;
+               break;
+       case SZ_256M:
+               outval = FARADAY_PCI_MEMSIZE_256MB;
+               break;
+       case SZ_512M:
+               outval = FARADAY_PCI_MEMSIZE_512MB;
+               break;
+       case SZ_1G:
+               outval = FARADAY_PCI_MEMSIZE_1GB;
+               break;
+       case SZ_2G:
+               outval = FARADAY_PCI_MEMSIZE_2GB;
+               break;
+       default:
+               return -EINVAL;
+       }
+       outval <<= FARADAY_PCI_MEMSIZE_SHIFT;
+
+       /* This is probably not good */
+       if (mem_base & ~(FARADAY_PCI_MEMBASE_MASK))
+               pr_warn("truncated PCI memory base\n");
+       /* Translate to bridge side address space */
+       outval |= (mem_base & FARADAY_PCI_MEMBASE_MASK);
+       pr_debug("Translated pci base @%pap, size %pap to config %08x\n",
+                &mem_base, &mem_size, outval);
+
+       *val = outval;
+       return 0;
+}
+
+static int faraday_pci_read_config(struct pci_bus *bus, unsigned int fn,
+                                  int config, int size, u32 *value)
+{
+       struct faraday_pci *p = bus->sysdata;
+
+       writel(PCI_CONF_BUS(bus->number) |
+                       PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+                       PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+                       PCI_CONF_WHERE(config) |
+                       PCI_CONF_ENABLE,
+                       p->base + PCI_CONFIG);
+
+       *value = readl(p->base + PCI_DATA);
+
+       if (size == 1)
+               *value = (*value >> (8 * (config & 3))) & 0xFF;
+       else if (size == 2)
+               *value = (*value >> (8 * (config & 3))) & 0xFFFF;
+
+       dev_dbg(&bus->dev,
+               "[read]  slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+               PCI_SLOT(fn), PCI_FUNC(fn), config, size, *value);
+
+       return PCIBIOS_SUCCESSFUL;
+}
+
+static int faraday_pci_write_config(struct pci_bus *bus, unsigned int fn,
+                                   int config, int size, u32 value)
+{
+       struct faraday_pci *p = bus->sysdata;
+       int ret = PCIBIOS_SUCCESSFUL;
+
+       dev_dbg(&bus->dev,
+               "[write] slt: %.2d, fnc: %d, cnf: 0x%.2X, val (%d bytes): 0x%.8X\n",
+               PCI_SLOT(fn), PCI_FUNC(fn), config, size, value);
+
+       writel(PCI_CONF_BUS(bus->number) |
+                       PCI_CONF_DEVICE(PCI_SLOT(fn)) |
+                       PCI_CONF_FUNCTION(PCI_FUNC(fn)) |
+                       PCI_CONF_WHERE(config) |
+                       PCI_CONF_ENABLE,
+                       p->base + PCI_CONFIG);
+
+       switch (size) {
+       case 4:
+               writel(value, p->base + PCI_DATA);
+               break;
+       case 2:
+               writew(value, p->base + PCI_DATA + (config & 3));
+               break;
+       case 1:
+               writeb(value, p->base + PCI_DATA + (config & 3));
+               break;
+       default:
+               ret = PCIBIOS_BAD_REGISTER_NUMBER;
+       }
+
+       return ret;
+}
+
+static struct pci_ops faraday_pci_ops = {
+       .read   = faraday_pci_read_config,
+       .write  = faraday_pci_write_config,
+};
+
+static void faraday_pci_ack_irq(struct irq_data *d)
+{
+       struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+       unsigned int reg;
+
+       faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+       reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+       reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTSTS_SHIFT);
+       faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_mask_irq(struct irq_data *d)
+{
+       struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+       unsigned int reg;
+
+       faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+       reg &= ~((0xF << PCI_CTRL2_INTSTS_SHIFT)
+                | BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT));
+       faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_unmask_irq(struct irq_data *d)
+{
+       struct faraday_pci *p = irq_data_get_irq_chip_data(d);
+       unsigned int reg;
+
+       faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+       reg &= ~(0xF << PCI_CTRL2_INTSTS_SHIFT);
+       reg |= BIT(irqd_to_hwirq(d) + PCI_CTRL2_INTMASK_SHIFT);
+       faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, reg);
+}
+
+static void faraday_pci_irq_handler(struct irq_desc *desc)
+{
+       struct faraday_pci *p = irq_desc_get_handler_data(desc);
+       struct irq_chip *irqchip = irq_desc_get_chip(desc);
+       unsigned int irq_stat, reg, i;
+
+       faraday_pci_read_config(p->bus, 0, FARADAY_PCI_CTRL2, 4, &reg);
+       irq_stat = reg >> PCI_CTRL2_INTSTS_SHIFT;
+
+       chained_irq_enter(irqchip, desc);
+
+       for (i = 0; i < 4; i++) {
+               if ((irq_stat & BIT(i)) == 0)
+                       continue;
+               generic_handle_irq(irq_find_mapping(p->irqdomain, i));
+       }
+
+       chained_irq_exit(irqchip, desc);
+}
+
+static struct irq_chip faraday_pci_irq_chip = {
+       .name = "PCI",
+       .irq_ack = faraday_pci_ack_irq,
+       .irq_mask = faraday_pci_mask_irq,
+       .irq_unmask = faraday_pci_unmask_irq,
+};
+
+static int faraday_pci_irq_map(struct irq_domain *domain, unsigned int irq,
+                              irq_hw_number_t hwirq)
+{
+       irq_set_chip_and_handler(irq, &faraday_pci_irq_chip, handle_level_irq);
+       irq_set_chip_data(irq, domain->host_data);
+
+       return 0;
+}
+
+static const struct irq_domain_ops faraday_pci_irqdomain_ops = {
+       .map = faraday_pci_irq_map,
+};
+
+static int faraday_pci_setup_cascaded_irq(struct faraday_pci *p)
+{
+       struct device_node *intc = of_get_next_child(p->dev->of_node, NULL);
+       int irq;
+       int i;
+
+       if (!intc) {
+               dev_err(p->dev, "missing child interrupt-controller node\n");
+               return -EINVAL;
+       }
+
+       /* All PCI IRQs cascade off this one */
+       irq = of_irq_get(intc, 0);
+       if (!irq) {
+               dev_err(p->dev, "failed to get parent IRQ\n");
+               return -EINVAL;
+       }
+
+       p->irqdomain = irq_domain_add_linear(intc, 4,
+                                            &faraday_pci_irqdomain_ops, p);
+       if (!p->irqdomain) {
+               dev_err(p->dev, "failed to create Gemini PCI IRQ domain\n");
+               return -EINVAL;
+       }
+
+       irq_set_chained_handler_and_data(irq, faraday_pci_irq_handler, p);
+
+       for (i = 0; i < 4; i++)
+               irq_create_mapping(p->irqdomain, i);
+
+       return 0;
+}
+
+static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
+                                    struct device_node *node)
+{
+       const int na = 3, ns = 2;
+       int rlen;
+
+       parser->node = node;
+       parser->pna = of_n_addr_cells(node);
+       parser->np = parser->pna + na + ns;
+
+       parser->range = of_get_property(node, "dma-ranges", &rlen);
+       if (!parser->range)
+               return -ENOENT;
+       parser->end = parser->range + rlen / sizeof(__be32);
+
+       return 0;
+}
+
+static int faraday_pci_parse_map_dma_ranges(struct faraday_pci *p,
+                                           struct device_node *np)
+{
+       struct of_pci_range range;
+       struct of_pci_range_parser parser;
+       struct device *dev = p->dev;
+       u32 confreg[3] = {
+               FARADAY_PCI_MEM1_BASE_SIZE,
+               FARADAY_PCI_MEM2_BASE_SIZE,
+               FARADAY_PCI_MEM3_BASE_SIZE,
+       };
+       int i = 0;
+       u32 val;
+
+       if (pci_dma_range_parser_init(&parser, np)) {
+               dev_err(dev, "missing dma-ranges property\n");
+               return -EINVAL;
+       }
+
+       /*
+        * Get the dma-ranges from the device tree
+        */
+       for_each_of_pci_range(&parser, &range) {
+               u64 end = range.pci_addr + range.size - 1;
+               int ret;
+
+               ret = faraday_res_to_memcfg(range.pci_addr, range.size, &val);
+               if (ret) {
+                       dev_err(dev,
+                               "DMA range %d: illegal MEM resource size\n", i);
+                       return -EINVAL;
+               }
+
+               dev_info(dev, "DMA MEM%d BASE: 0x%016llx -> 0x%016llx config %08x\n",
+                        i + 1, range.pci_addr, end, val);
+               if (i <= 2) {
+                       faraday_pci_write_config(p->bus, 0, confreg[i],
+                                                4, val);
+               } else {
+                       dev_err(dev, "ignore extraneous dma-range %d\n", i);
+                       break;
+               }
+
+               i++;
+       }
+
+       return 0;
+}
+
+static int faraday_pci_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       const struct faraday_pci_variant *variant =
+               of_device_get_match_data(dev);
+       struct resource *regs;
+       resource_size_t io_base;
+       struct resource_entry *win;
+       struct faraday_pci *p;
+       struct resource *mem;
+       struct resource *io;
+       struct pci_host_bridge *host;
+       int ret;
+       u32 val;
+       LIST_HEAD(res);
+
+       host = pci_alloc_host_bridge(sizeof(*p));
+       if (!host)
+               return -ENOMEM;
+
+       host->dev.parent = dev;
+       host->ops = &faraday_pci_ops;
+       host->busnr = 0;
+       host->msi = NULL;
+       p = pci_host_bridge_priv(host);
+       host->sysdata = p;
+       p->dev = dev;
+
+       regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       p->base = devm_ioremap_resource(dev, regs);
+       if (IS_ERR(p->base))
+               return PTR_ERR(p->base);
+
+       ret = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff,
+                                              &res, &io_base);
+       if (ret)
+               return ret;
+
+       ret = devm_request_pci_bus_resources(dev, &res);
+       if (ret)
+               return ret;
+
+       /* Get the I/O and memory ranges from DT */
+       resource_list_for_each_entry(win, &res) {
+               switch (resource_type(win->res)) {
+               case IORESOURCE_IO:
+                       io = win->res;
+                       io->name = "Gemini PCI I/O";
+                       if (!faraday_res_to_memcfg(io->start - win->offset,
+                                                  resource_size(io), &val)) {
+                               /* setup I/O space size */
+                               writel(val, p->base + PCI_IOSIZE);
+                       } else {
+                               dev_err(dev, "illegal IO mem size\n");
+                               return -EINVAL;
+                       }
+                       ret = pci_remap_iospace(io, io_base);
+                       if (ret) {
+                               dev_warn(dev, "error %d: failed to map resource %pR\n",
+                                        ret, io);
+                               continue;
+                       }
+                       break;
+               case IORESOURCE_MEM:
+                       mem = win->res;
+                       mem->name = "Gemini PCI MEM";
+                       break;
+               case IORESOURCE_BUS:
+                       break;
+               default:
+                       break;
+               }
+       }
+
+       /* Setup hostbridge */
+       val = readl(p->base + PCI_CTRL);
+       val |= PCI_COMMAND_IO;
+       val |= PCI_COMMAND_MEMORY;
+       val |= PCI_COMMAND_MASTER;
+       writel(val, p->base + PCI_CTRL);
+
+       list_splice_init(&res, &host->windows);
+       ret = pci_register_host_bridge(host);
+       if (ret) {
+               dev_err(dev, "failed to register host: %d\n", ret);
+               return ret;
+       }
+       p->bus = host->bus;
+
+       /* Mask and clear all interrupts */
+       faraday_pci_write_config(p->bus, 0, FARADAY_PCI_CTRL2 + 2, 2, 0xF000);
+       if (variant->cascaded_irq) {
+               ret = faraday_pci_setup_cascaded_irq(p);
+               if (ret) {
+                       dev_err(dev, "failed to setup cascaded IRQ\n");
+                       return ret;
+               }
+       }
+
+       ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node);
+       if (ret)
+               return ret;
+
+       pci_scan_child_bus(p->bus);
+       pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+       pci_bus_assign_resources(p->bus);
+       pci_bus_add_devices(p->bus);
+       pci_free_resource_list(&res);
+
+       return 0;
+}
+
+/*
+ * We encode bridge variants here, we have at least two so it doesn't
+ * hurt to have infrastructure to encompass future variants as well.
+ */
+const struct faraday_pci_variant faraday_regular = {
+       .cascaded_irq = true,
+};
+
+const struct faraday_pci_variant faraday_dual = {
+       .cascaded_irq = false,
+};
+
+static const struct of_device_id faraday_pci_of_match[] = {
+       {
+               .compatible = "faraday,ftpci100",
+               .data = &faraday_regular,
+       },
+       {
+               .compatible = "faraday,ftpci100-dual",
+               .data = &faraday_dual,
+       },
+       {},
+};
+
+static struct platform_driver faraday_pci_driver = {
+       .driver = {
+               .name = "ftpci100",
+               .of_match_table = of_match_ptr(faraday_pci_of_match),
+       },
+       .probe  = faraday_pci_probe,
+};
+builtin_platform_driver(faraday_pci_driver);