return err;
}
-static void sprom_extract_r1(struct ssb_sprom_r1 *out, const u16 *in)
-{
- int i;
- u16 v;
-
- SPEX(pci_spid, SSB_SPROM1_SPID, 0xFFFF, 0);
- SPEX(pci_svid, SSB_SPROM1_SVID, 0xFFFF, 0);
- SPEX(pci_pid, SSB_SPROM1_PID, 0xFFFF, 0);
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM1_ET0MAC) + i];
- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
- }
- for (i = 0; i < 3; i++) {
- v = in[SPOFF(SSB_SPROM1_ET1MAC) + i];
- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
- }
- SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
- SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
- SSB_SPROM1_ETHPHY_ET1A_SHIFT);
- SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
- SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
- SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
- SSB_SPROM1_BINF_CCODE_SHIFT);
- SPEX(antenna_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
- SSB_SPROM1_BINF_ANTA_SHIFT);
- SPEX(antenna_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
- SSB_SPROM1_BINF_ANTBG_SHIFT);
- SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
- SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
- SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
- SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0);
- SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0);
- SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0);
- SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0);
- SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1,
- SSB_SPROM1_GPIOA_P1_SHIFT);
- SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0);
- SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3,
- SSB_SPROM1_GPIOB_P3_SHIFT);
- SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A,
- SSB_SPROM1_MAXPWR_A_SHIFT);
- SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0);
- SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A,
- SSB_SPROM1_ITSSI_A_SHIFT);
- SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
- SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
- SPEX(antenna_gain_a, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_A, 0);
- SPEX(antenna_gain_bg, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_BG,
- SSB_SPROM1_AGAIN_BG_SHIFT);
-}
-
static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
{
int i;
int i;
u16 v;
- /* extract the r1 variables */
+ /* extract the equivalent of the r1 variables */
for (i = 0; i < 3; i++) {
v = in[SPOFF(SSB_SPROM4_IL0MAC) + i];
*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
SPEX(antenna_gain_a, SSB_SPROM4_AGAIN, SSB_SPROM4_AGAIN_0, 0);
SPEX(antenna_gain_bg, SSB_SPROM4_AGAIN, SSB_SPROM4_AGAIN_1,
SSB_SPROM4_AGAIN_1_SHIFT);
+ SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
+ SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
+ SSB_SPROM4_ITSSI_BG_SHIFT);
+ SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
+ SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
+ SSB_SPROM4_ITSSI_A_SHIFT);
+ SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
+ SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
+ SSB_SPROM4_GPIOA_P1_SHIFT);
+ SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
+ SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
+ SSB_SPROM4_GPIOB_P3_SHIFT);
/* TODO - get remaining rev 4 stuff needed */
}
memset(out, 0, sizeof(*out));
out->revision = in[size - 1] & 0x00FF;
+ ssb_printk(KERN_INFO PFX "SPROM revision %d detected.\n", out->revision);
if ((bus->chip_id & 0xFF00) == 0x4400) {
/* Workaround: The BCM44XX chip has a stupid revision
* number stored in the SPROM.
* Always extract r1. */
out->revision = 1;
sprom_extract_r123(out, in);
- sprom_extract_r1(&out->r1, in);
} else if (bus->chip_id == 0x4321) {
/* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
out->revision = 4;
goto unsupported;
if (out->revision >= 1 && out->revision <= 3) {
sprom_extract_r123(out, in);
- sprom_extract_r1(&out->r1, in);
}
if (out->revision == 4)
sprom_extract_r4(out, in);
unsupported:
ssb_printk(KERN_WARNING PFX "Unsupported SPROM revision %d "
"detected. Will extract v1\n", out->revision);
- sprom_extract_r1(&out->r1, in);
+ sprom_extract_r123(out, in);
return 0;
}
struct ssb_bus;
struct ssb_driver;
-
-struct ssb_sprom_r1 {
- u16 pci_spid; /* Subsystem Product ID for PCI */
- u16 pci_svid; /* Subsystem Vendor ID for PCI */
- u16 pci_pid; /* Product ID for PCI */
- u8 il0mac[6]; /* MAC address for 802.11b/g */
- u8 et0mac[6]; /* MAC address for Ethernet */
- u8 et1mac[6]; /* MAC address for 802.11a */
- u8 et0phyaddr:5; /* MII address for enet0 */
- u8 et1phyaddr:5; /* MII address for enet1 */
- u8 et0mdcport:1; /* MDIO for enet0 */
- u8 et1mdcport:1; /* MDIO for enet1 */
- u8 board_rev; /* Board revision */
- u8 country_code:4; /* Country Code */
- u8 antenna_a:2; /* Antenna 0/1 available for A-PHY */
- u8 antenna_bg:2; /* Antenna 0/1 available for B-PHY and G-PHY */
- u16 pa0b0;
- u16 pa0b1;
- u16 pa0b2;
- u16 pa1b0;
- u16 pa1b1;
- u16 pa1b2;
- u8 gpio0; /* GPIO pin 0 */
- u8 gpio1; /* GPIO pin 1 */
- u8 gpio2; /* GPIO pin 2 */
- u8 gpio3; /* GPIO pin 3 */
- u16 maxpwr_a; /* A-PHY Power Amplifier Max Power (in dBm Q5.2) */
- u16 maxpwr_bg; /* B/G-PHY Power Amplifier Max Power (in dBm Q5.2) */
- u8 itssi_a; /* Idle TSSI Target for A-PHY */
- u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
- u16 boardflags_lo; /* Boardflags (low 16 bits) */
- u8 antenna_gain_a; /* A-PHY Antenna gain (in dBm Q5.2) */
- u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */
- u8 oem[8]; /* OEM string (rev 1 only) */
-};
-
-struct ssb_sprom_r2 {
- u16 boardflags_hi; /* Boardflags (high 16 bits) */
- u8 maxpwr_a_lo; /* A-PHY Max Power Low */
- u8 maxpwr_a_hi; /* A-PHY Max Power High */
- u16 pa1lob0; /* A-PHY PA Low Settings */
- u16 pa1lob1; /* A-PHY PA Low Settings */
- u16 pa1lob2; /* A-PHY PA Low Settings */
- u16 pa1hib0; /* A-PHY PA High Settings */
- u16 pa1hib1; /* A-PHY PA High Settings */
- u16 pa1hib2; /* A-PHY PA High Settings */
- u8 ofdm_pwr_off; /* OFDM Power Offset from CCK Level */
- u8 country_str[2]; /* Two char Country Code */
-};
-
-struct ssb_sprom_r3 {
- u32 ofdmapo; /* A-PHY OFDM Mid Power Offset */
- u32 ofdmalpo; /* A-PHY OFDM Low Power Offset */
- u32 ofdmahpo; /* A-PHY OFDM High Power Offset */
- u8 gpioldc_on_cnt; /* GPIO LED Powersave Duty Cycle ON count */
- u8 gpioldc_off_cnt; /* GPIO LED Powersave Duty Cycle OFF count */
- u8 cckpo_1M:4; /* CCK Power Offset for Rate 1M */
- u8 cckpo_2M:4; /* CCK Power Offset for Rate 2M */
- u8 cckpo_55M:4; /* CCK Power Offset for Rate 5.5M */
- u8 cckpo_11M:4; /* CCK Power Offset for Rate 11M */
- u32 ofdmgpo; /* G-PHY OFDM Power Offset */
-};
-
struct ssb_sprom {
u8 revision;
- u8 temp_fill[2 * sizeof(struct ssb_sprom_r1)];
u8 il0mac[6]; /* MAC address for 802.11b/g */
u8 et0mac[6]; /* MAC address for Ethernet */
u8 et1mac[6]; /* MAC address for 802.11a */
u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */
/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
- /* The valid r# fields are selected by the "revision".
- * Revision 3 and lower inherit from lower revisions.
- */
- union {
- struct {
- struct ssb_sprom_r1 r1;
- struct ssb_sprom_r2 r2;
- struct ssb_sprom_r3 r3;
- };
- };
};
/* Information about the PCB the circuitry is soldered on. */
#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */
#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */
#define SSB_SPROM_REVISION_CRC_SHIFT 8
+
/* SPROM Revision 1 */
#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */
#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */
#define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */
#define SSB_SPROM1_AGAIN_BG 0xFF00 /* B-PHY and G-PHY */
#define SSB_SPROM1_AGAIN_BG_SHIFT 8
-#define SSB_SPROM1_OEM 0x1076 /* 8 bytes OEM string (rev 1 only) */
+
/* SPROM Revision 2 (inherits from rev 1) */
#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */
#define SSB_SPROM2_OPO_VALUE 0x00FF
#define SSB_SPROM2_OPO_UNUSED 0xFF00
#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */
+
/* SPROM Revision 3 (inherits most data from rev 2) */
#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */
#define SSB_SPROM3_CCKPO_11M 0xF000 /* 11M Rate PO */
#define SSB_SPROM3_CCKPO_11M_SHIFT 12
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+
/* SPROM Revision 4 entries with ?? in comment are unknown */
-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for b/g */
+#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */
#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */
-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings */
+#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_AGAIN_1 0xFF00 /* Antenna 1 */
#define SSB_SPROM4_AGAIN_1_SHIFT 8
#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
-#define SSB_SPROM4_MAXP_A 0x1000 /* Max Power A ?? */
-#define SSB_SPROM4_MAXP_A_HI 0x00FF /* Mask for Hi */
-#define SSB_SPROM4_MAXP_A_LO 0xFF00 /* Mask for Lo */
-#define SSB_SPROM4_MAXP_A_LO_SHIFT 16 /* Shift for Lo */
-#define SSB_SPROM4_PA1LOB0 0x1000 /* ?? */
-#define SSB_SPROM4_PA1LOB1 0x1000 /* ?? */
-#define SSB_SPROM4_PA1LOB2 0x1000 /* ?? */
-#define SSB_SPROM4_PA1HIB0 0x1000 /* ?? */
-#define SSB_SPROM4_PA1HIB1 0x1000 /* ?? */
-#define SSB_SPROM4_PA1HIB2 0x1000 /* ?? */
-#define SSB_SPROM4_OPO 0x1000 /* ?? */
-#define SSB_SPROM4_OPO_VALUE 0x0000 /* ?? */
-#define SSB_SPROM4_GPIOLDC 0x105A /* LED Powersave Duty Cycle */
-#define SSB_SPROM4_GPIOLDC_OFF 0x0000FF00 /* Off Count */
-#define SSB_SPROM4_GPIOLDC_OFF_SHIFT 8
-#define SSB_SPROM4_GPIOLDC_ON 0x00FF0000 /* On Count */
-#define SSB_SPROM4_GPIOLDC_ON_SHIFT 16
-
+#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
+#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
+#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
+#define SSB_SPROM4_ITSSI_BG_SHIFT 8
+#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */
+#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */
+#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
+#define SSB_SPROM4_ITSSI_A_SHIFT 8
+#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */
+#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */
+#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */
+#define SSB_SPROM4_GPIOA_P1_SHIFT 8
+#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */
+#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */
+#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */
+#define SSB_SPROM4_GPIOB_P3_SHIFT 8
+#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */
+#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */
+#define SSB_SPROM4_PA0B2 0x1086
+#define SSB_SPROM4_PA1B0 0x108E
+#define SSB_SPROM4_PA1B1 0x1090
+#define SSB_SPROM4_PA1B2 0x1092
/* Values for SSB_SPROM1_BINF_CCODE */
enum {
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff