pata_radisys: support cable_detect

Signed-off-by: Alan Cox <number6@the-village.bc.nu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 9a9132c9e3317a034ab0f402cc45ae1f6289ac39..1c54673e008d0a0d2f5e7c3f821ac260d162522d 100644 (file)
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -24,40 +24,12 @@
 #include <linux/ata.h>
 
 #define DRV_NAME       "pata_radisys"
-#define DRV_VERSION    "0.4.1"
-
-/**
- *     radisys_probe_init              -       probe begin
- *     @ap: ATA port
- *
- *     Set up cable type and use generic probe init
- */
-
-static int radisys_pre_reset(struct ata_port *ap)
-{
-       ap->cbl = ATA_CBL_PATA80;
-       return ata_std_prereset(ap);
-}
-
-
-/**
- *     radisys_pata_error_handler - Probe specified port on PATA host controller
- *     @ap: Port to probe
- *     @classes:
- *
- *     LOCKING:
- *     None (inherited from caller).
- */
-
-static void radisys_pata_error_handler(struct ata_port *ap)
-{
-       ata_bmdma_drive_eh(ap, radisys_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
+#define DRV_VERSION    "0.4.4"
 
 /**
  *     radisys_set_piomode - Initialize host controller PATA PIO timings
- *     @ap: Port whose timings we are configuring
- *     @adev: um
+ *     @ap: ATA port
+ *     @adev: Device whose timings we are configuring
  *
  *     Set PIO mode for device, in host controller PCI config space.
  *
@@ -248,8 +220,9 @@ static const struct ata_port_operations radisys_pata_ops = {
 
        .freeze                 = ata_bmdma_freeze,
        .thaw                   = ata_bmdma_thaw,
-       .error_handler          = radisys_pata_error_handler,
+       .error_handler          = ata_bmdma_error_handler,
        .post_internal_cmd      = ata_bmdma_post_internal_cmd,
+       .cable_detect           = ata_cable_unknown,
 
        .bmdma_setup            = ata_bmdma_setup,
        .bmdma_start            = ata_bmdma_start,