# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
#
-obj-y := atlas_int.o atlas_setup.o
+obj-y := atlas_int.o atlas-irq.o atlas_setup.o
obj-$(CONFIG_KGDB) += atlas_gdb.o
--- /dev/null
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Interrupt exception dispatch code.
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/mips-boards/atlasint.h>
+
+/*
+ * Furthermore, the IRQs on the MIPS board look basically (barring software
+ * IRQs which we don't use at all and all external interrupt sources are
+ * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Combined hardware interrupt (hw0)
+ * 3 Hardware (ignored)
+ * 4 Hardware (ignored)
+ * 5 Hardware (ignored)
+ * 6 Hardware (ignored)
+ * 7 R4k timer (what we use)
+ *
+ * Note: On the SEAD board thing are a little bit different.
+ * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
+ * wired to UART1.
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Lowest ---- Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(mipsIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE # get irq bits
+ mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
+ and s0, s1
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
+#else
+ beqz s0, spurious
+ li a0, 7
+
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
+#endif
+
+ li a1, MIPSCPU_INT_ATLAS
+ bne a0, a1, 1f
+ addu a0, MIPSCPU_INT_BASE
+
+ jal atlas_hw0_irqdispatch
+ move a0, sp
+
+ j ret_from_irq
+ nop
+
+1: jal do_IRQ
+ move a1, sp
+
+ j ret_from_irq
+ nop
+
+spurious:
+ j spurious_interrupt
+ nop
+ END(mipsIRQ)
# Makefile for the MIPS boards generic routines under Linux.
#
-obj-y := mipsIRQ.o reset.o display.o init.o memory.o \
- printf.o cmdline.o time.o
+obj-y := reset.o display.o init.o memory.o printf.o \
+ cmdline.o time.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_KGDB) += gdb_hook.o
+++ /dev/null
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Interrupt exception dispatch code.
- *
- */
-#include <linux/config.h>
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlasint.h>
-#define CASCADE_IRQ MIPSCPU_INT_ATLAS
-#define CASCADE_DISPATCH atlas_hw0_irqdispatch
-#endif
-#ifdef CONFIG_MIPS_MALTA
-#include <asm/mips-boards/maltaint.h>
-#define CASCADE_IRQ MIPSCPU_INT_I8259A
-#define CASCADE_DISPATCH malta_hw0_irqdispatch
-#endif
-#ifdef CONFIG_MIPS_SEAD
-#include <asm/mips-boards/seadint.h>
-#endif
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- * all the pending IRQ bits in the cause register is _NOT_ the answer, the
- * common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- * would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- * between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the MIPS board look basically (barring software
- * IRQs which we don't use at all and all external interrupt sources are
- * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- * MIPS IRQ Source
- * -------- ------
- * 0 Software (ignored)
- * 1 Software (ignored)
- * 2 Combined hardware interrupt (hw0)
- * 3 Hardware (ignored)
- * 4 Hardware (ignored)
- * 5 Hardware (ignored)
- * 6 Hardware (ignored)
- * 7 R4k timer (what we use)
- *
- * Note: On the SEAD board thing are a little bit different.
- * Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
- * wired to UART1.
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ---- R4k Timer
- * Lowest ---- Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
- .text
- .set noreorder
- .set noat
- .align 5
- NESTED(mipsIRQ, PT_SIZE, sp)
- SAVE_ALL
- CLI
- .set at
-
- mfc0 s0, CP0_CAUSE # get irq bits
- mfc0 s1, CP0_STATUS # get irq mask
- andi s0, ST0_IM # CAUSE.CE may be non-zero!
- and s0, s1
-
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
- .set mips32
- clz a0, s0
- .set mips0
- negu a0
- addu a0, 31-CAUSEB_IP
- bltz a0, spurious
-#else
- beqz s0, spurious
- li a0, 7
-
- and t0, s0, 0xf000
- sltiu t0, t0, 1
- sll t0, 2
- subu a0, t0
- sll s0, t0
-
- and t0, s0, 0xc000
- sltiu t0, t0, 1
- sll t0, 1
- subu a0, t0
- sll s0, t0
-
- and t0, s0, 0x8000
- sltiu t0, t0, 1
- # sll t0, 0
- subu a0, t0
- # sll s0, t0
-#endif
-
-#ifdef CASCADE_IRQ
- li a1, CASCADE_IRQ
- bne a0, a1, 1f
- addu a0, MIPSCPU_INT_BASE
-
- jal CASCADE_DISPATCH
- move a0, sp
-
- j ret_from_irq
- nop
-1:
-#else
- addu a0, MIPSCPU_INT_BASE
-#endif
-
- jal do_IRQ
- move a1, sp
-
- j ret_from_irq
- nop
-
-
-spurious:
- jal spurious_interrupt
- nop
- j ret_from_irq
- nop
- END(mipsIRQ)
# under Linux.
#
-obj-y := malta_int.o malta_setup.o
+obj-y := malta_int.o malta-irq.o malta_setup.o
--- /dev/null
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/mips-boards/maltaint.h>
+
+/*
+ * IRQs on the Malta board look basically (barring software IRQs which we
+ * don't use at all and all external interrupt sources are combined together
+ * on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 Combined hardware interrupt (hw0)
+ * 3 Hardware (ignored)
+ * 4 Hardware (ignored)
+ * 5 Hardware (ignored)
+ * 6 Hardware (ignored)
+ * 7 R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Lowest ---- Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(mipsIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE # get irq bits
+ mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
+ and s0, s1
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
+#else
+ beqz s0, spurious
+ li a0, 7
+
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
+#endif
+
+ li a1, MIPSCPU_INT_I8259A
+ bne a0, a1, 1f
+ addu a0, MIPSCPU_INT_BASE
+
+ jal malta_hw0_irqdispatch
+ move a0, sp
+
+ j ret_from_irq
+ nop
+1:
+
+ jal do_IRQ
+ move a1, sp
+
+ j ret_from_irq
+ nop
+
+spurious:
+ j spurious_interrupt
+ nop
+ END(mipsIRQ)
# under Linux.
#
-obj-y := sead_int.o sead_setup.o
+obj-y := sead_int.o sead-irq.o sead_setup.o
--- /dev/null
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
+ *
+ * ########################################################################
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Interrupt exception dispatch code.
+ *
+ */
+#include <linux/config.h>
+
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/mips-boards/seadint.h>
+
+/*
+ * IRQs on the SEAD board look basically are combined together on hardware
+ * interrupt 0 (MIPS IRQ 2)) like:
+ *
+ * MIPS IRQ Source
+ * -------- ------
+ * 0 Software (ignored)
+ * 1 Software (ignored)
+ * 2 UART0 (hw0)
+ * 3 UART1 (hw1)
+ * 4 Hardware (ignored)
+ * 5 Hardware (ignored)
+ * 6 Hardware (ignored)
+ * 7 R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ---- R4k Timer
+ * Lowest ---- Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+ .text
+ .set noreorder
+ .set noat
+ .align 5
+ NESTED(mipsIRQ, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 s0, CP0_CAUSE # get irq bits
+ mfc0 s1, CP0_STATUS # get irq mask
+ andi s0, ST0_IM # CAUSE.CE may be non-zero!
+ and s0, s1
+
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+ .set mips32
+ clz a0, s0
+ .set mips0
+ negu a0
+ addu a0, 31-CAUSEB_IP
+ bltz a0, spurious
+#else
+ beqz s0, spurious
+ li a0, 7
+
+ and t0, s0, 0xf000
+ sltiu t0, t0, 1
+ sll t0, 2
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0xc000
+ sltiu t0, t0, 1
+ sll t0, 1
+ subu a0, t0
+ sll s0, t0
+
+ and t0, s0, 0x8000
+ sltiu t0, t0, 1
+ # sll t0, 0
+ subu a0, t0
+ # sll s0, t0
+#endif
+
+ addu a0, MIPSCPU_INT_BASE
+ jal do_IRQ
+ move a1, sp
+
+ j ret_from_irq
+ nop
+
+spurious:
+ j spurious_interrupt
+ nop
+ END(mipsIRQ)
#define ATLAS_RTC_ADR_REG 0x1f000800
#define ATLAS_RTC_DAT_REG 0x1f000808
-
/*
* Atlas interrupt controller register base.
*/
#define ATLAS_ICTRL_REGS_BASE 0x1f000000
+/*
+ * Atlas registers are memory mapped on 64-bit aligned boundaries and
+ * only word access are allowed.
+ */
+struct atlas_ictrl_regs {
+ volatile unsigned int intraw;
+ int dummy1;
+ volatile unsigned int intseten;
+ int dummy2;
+ volatile unsigned int intrsten;
+ int dummy3;
+ volatile unsigned int intenable;
+ int dummy4;
+ volatile unsigned int intstatus;
+ int dummy5;
+};
+
/*
* Atlas UART register base.
*/
#define ATLASINT_RES31 (ATLASINT_BASE+31)
#define ATLASINT_END (ATLASINT_BASE+31)
-/*
- * Atlas registers are memory mapped on 64-bit aligned boundaries and
- * only word access are allowed.
- */
-struct atlas_ictrl_regs {
- volatile unsigned int intraw;
- int dummy1;
- volatile unsigned int intseten;
- int dummy2;
- volatile unsigned int intrsten;
- int dummy3;
- volatile unsigned int intenable;
- int dummy4;
- volatile unsigned int intstatus;
- int dummy5;
-};
-
-extern void atlasint_init(void);
-
#endif /* !(_MIPS_ATLASINT_H) */
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff