#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
-#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
+#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
/* PLL_DIV Macros */
#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-/* VR_CTL Masks */
-#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
+/* VR_CTL Masks */
+#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN 0x000C /* Voltage Level Gain */
-#define GAIN_5 0x0000 /* GAIN = 5 */
-#define GAIN_10 0x0004 /* GAIN = 10 */
-#define GAIN_20 0x0008 /* GAIN = 20 */
-#define GAIN_50 0x000C /* GAIN = 50 */
#define VLEV 0x00F0 /* Internal Voltage Level */
#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */
+#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
-#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
-#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
-#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
+#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
+#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
+#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */
#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */
#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */
#define IRQ_TWI 0x00000200 /* TWI Interrupt */
#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */
-#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
+#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */
#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */
#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */
#define WDEV_NONE 0x0006 /* no event on roll over */
#define WDEN 0x0FF0 /* enable watchdog */
#define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */
+#define WDRO 0x8000 /* watchdog rolled over latch */
/* depreciated WDOG_CTL Register Masks for legacy code */
#define NINT 0x01 /* Pending Interrupt */
#define IIR_TX_READY 0x02 /* UART_THR empty */
#define IIR_RX_READY 0x04 /* Receive data ready */
-#define IIR_LINE_CHANGE 0x06 /* Receive line status */
+#define IIR_LINE_CHANGE 0x06 /* Receive line status */
#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */
/* UARTx_GCTL Masks */
/* entry addresses of the user-callable Boot ROM functions */
-#define _BOOTROM_RESET 0xEF000000
-#define _BOOTROM_FINAL_INIT 0xEF000002
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
-#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
-#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
-#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
/* Bit masks for CNT_CONFIG */
#define CNTE 0x1 /* Counter Enable */
-#define nCNTE 0x0
+#define nCNTE 0x0
#define DEBE 0x2 /* Debounce Enable */
-#define nDEBE 0x0
+#define nDEBE 0x0
#define CDGINV 0x10 /* CDG Pin Polarity Invert */
-#define nCDGINV 0x0
+#define nCDGINV 0x0
#define CUDINV 0x20 /* CUD Pin Polarity Invert */
-#define nCUDINV 0x0
+#define nCUDINV 0x0
#define CZMINV 0x40 /* CZM Pin Polarity Invert */
-#define nCZMINV 0x0
+#define nCZMINV 0x0
#define CNTMODE 0x700 /* Counter Operating Mode */
#define ZMZC 0x800 /* CZM Zeroes Counter Enable */
-#define nZMZC 0x0
+#define nZMZC 0x0
#define BNDMODE 0x3000 /* Boundary register Mode */
#define INPDIS 0x8000 /* CUG and CDG Input Disable */
-#define nINPDIS 0x0
+#define nINPDIS 0x0
/* Bit masks for CNT_IMASK */
#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */
-#define nICIE 0x0
+#define nICIE 0x0
#define UCIE 0x2 /* Up count Interrupt Enable */
-#define nUCIE 0x0
+#define nUCIE 0x0
#define DCIE 0x4 /* Down count Interrupt Enable */
-#define nDCIE 0x0
+#define nDCIE 0x0
#define MINCIE 0x8 /* Min Count Interrupt Enable */
-#define nMINCIE 0x0
+#define nMINCIE 0x0
#define MAXCIE 0x10 /* Max Count Interrupt Enable */
-#define nMAXCIE 0x0
+#define nMAXCIE 0x0
#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */
-#define nCOV31IE 0x0
+#define nCOV31IE 0x0
#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */
-#define nCOV15IE 0x0
+#define nCOV15IE 0x0
#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */
-#define nCZEROIE 0x0
+#define nCZEROIE 0x0
#define CZMIE 0x100 /* CZM Pin Interrupt Enable */
-#define nCZMIE 0x0
+#define nCZMIE 0x0
#define CZMEIE 0x200 /* CZM Error Interrupt Enable */
-#define nCZMEIE 0x0
+#define nCZMEIE 0x0
#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */
-#define nCZMZIE 0x0
+#define nCZMZIE 0x0
/* Bit masks for CNT_STATUS */
#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */
-#define nICII 0x0
+#define nICII 0x0
#define UCII 0x2 /* Up count Interrupt Identifier */
-#define nUCII 0x0
+#define nUCII 0x0
#define DCII 0x4 /* Down count Interrupt Identifier */
-#define nDCII 0x0
+#define nDCII 0x0
#define MINCII 0x8 /* Min Count Interrupt Identifier */
-#define nMINCII 0x0
+#define nMINCII 0x0
#define MAXCII 0x10 /* Max Count Interrupt Identifier */
-#define nMAXCII 0x0
+#define nMAXCII 0x0
#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */
-#define nCOV31II 0x0
+#define nCOV31II 0x0
#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */
-#define nCOV15II 0x0
+#define nCOV15II 0x0
#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */
-#define nCZEROII 0x0
+#define nCZEROII 0x0
#define CZMII 0x100 /* CZM Pin Interrupt Identifier */
-#define nCZMII 0x0
+#define nCZMII 0x0
#define CZMEII 0x200 /* CZM Error Interrupt Identifier */
-#define nCZMEII 0x0
+#define nCZMEII 0x0
#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */
-#define nCZMZII 0x0
+#define nCZMZII 0x0
/* Bit masks for CNT_COMMAND */
#define W1LMIN 0xf0 /* Load Min Register */
#define W1LMAX 0xf00 /* Load Max Register */
#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */
-#define nW1ZMONCE 0x0
+#define nW1ZMONCE 0x0
/* Bit masks for CNT_DEBOUNCE */
#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
-#define nFIEN 0x0
+#define nFIEN 0x0
#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
-#define nFTESTDEC 0x0
+#define nFTESTDEC 0x0
#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
-#define nFWRTEST 0x0
+#define nFWRTEST 0x0
#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
-#define nFRDEN 0x0
+#define nFRDEN 0x0
#define FWREN 0x8000 /* OTP/Fuse Write Enable */
-#define nFWREN 0x0
+#define nFWREN 0x0
/* Bit masks for OTP_BEN */
/* Bit masks for OTP_STATUS */
#define FCOMP 0x1 /* OTP/Fuse Access Complete */
-#define nFCOMP 0x0
+#define nFCOMP 0x0
#define FERROR 0x2 /* OTP/Fuse Access Error */
-#define nFERROR 0x0
+#define nFERROR 0x0
#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
-#define nMMRGLOAD 0x0
+#define nMMRGLOAD 0x0
#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
-#define nMMRGLOCK 0x0
+#define nMMRGLOCK 0x0
#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
-#define nFPGMEN 0x0
+#define nFPGMEN 0x0
/* Bit masks for OTP_TIMING */
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
-#define nEMUDABL 0x0
+#define nEMUDABL 0x0
#define RSTDABL 0x2 /* Reset Disable */
-#define nRSTDABL 0x0
+#define nRSTDABL 0x0
#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
#define DMA0OVR 0x800 /* DMA0 Memory Access Override */
-#define nDMA0OVR 0x0
+#define nDMA0OVR 0x0
#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
-#define nDMA1OVR 0x0
+#define nDMA1OVR 0x0
#define EMUOVR 0x4000 /* Emulation Override */
-#define nEMUOVR 0x0
+#define nEMUOVR 0x0
#define OTPSEN 0x8000 /* OTP Secrets Enable. */
-#define nOTPSEN 0x0
+#define nOTPSEN 0x0
#define L2DABL 0x70000 /* L2 Memory Disable. */
/* Bit masks for SECURE_CONTROL */
#define SECURE0 0x1 /* SECURE 0 */
-#define nSECURE0 0x0
+#define nSECURE0 0x0
#define SECURE1 0x2 /* SECURE 1 */
-#define nSECURE1 0x0
+#define nSECURE1 0x0
#define SECURE2 0x4 /* SECURE 2 */
-#define nSECURE2 0x0
+#define nSECURE2 0x0
#define SECURE3 0x8 /* SECURE 3 */
-#define nSECURE3 0x0
+#define nSECURE3 0x0
/* Bit masks for SECURE_STATUS */
#define SECMODE 0x3 /* Secured Mode Control State */
#define NMI 0x4 /* Non Maskable Interrupt */
-#define nNMI 0x0
+#define nNMI 0x0
#define AFVALID 0x8 /* Authentication Firmware Valid */
-#define nAFVALID 0x0
+#define nAFVALID 0x0
#define AFEXIT 0x10 /* Authentication Firmware Exit */
-#define nAFEXIT 0x0
+#define nAFEXIT 0x0
#define SECSTAT 0xe0 /* Secure Status */
/* Bit masks for NFC_CTL */
#define WR_DLY 0xf /* Write Strobe Delay */
#define RD_DLY 0xf0 /* Read Strobe Delay */
#define NWIDTH 0x100 /* NAND Data Width */
-#define nNWIDTH 0x0
+#define nNWIDTH 0x0
#define PG_SIZE 0x200 /* Page Size */
-#define nPG_SIZE 0x0
+#define nPG_SIZE 0x0
/* Bit masks for NFC_STAT */
#define NBUSY 0x1 /* Not Busy */
-#define nNBUSY 0x0
+#define nNBUSY 0x0
#define WB_FULL 0x2 /* Write Buffer Full */
-#define nWB_FULL 0x0
+#define nWB_FULL 0x0
#define PG_WR_STAT 0x4 /* Page Write Pending */
-#define nPG_WR_STAT 0x0
+#define nPG_WR_STAT 0x0
#define PG_RD_STAT 0x8 /* Page Read Pending */
-#define nPG_RD_STAT 0x0
+#define nPG_RD_STAT 0x0
#define WB_EMPTY 0x10 /* Write Buffer Empty */
-#define nWB_EMPTY 0x0
+#define nWB_EMPTY 0x0
/* Bit masks for NFC_IRQSTAT */
#define NBUSYIRQ 0x1 /* Not Busy IRQ */
-#define nNBUSYIRQ 0x0
+#define nNBUSYIRQ 0x0
#define WB_OVF 0x2 /* Write Buffer Overflow */
-#define nWB_OVF 0x0
+#define nWB_OVF 0x0
#define WB_EDGE 0x4 /* Write Buffer Edge Detect */
-#define nWB_EDGE 0x0
+#define nWB_EDGE 0x0
#define RD_RDY 0x8 /* Read Data Ready */
-#define nRD_RDY 0x0
+#define nRD_RDY 0x0
#define WR_DONE 0x10 /* Page Write Done */
-#define nWR_DONE 0x0
+#define nWR_DONE 0x0
/* Bit masks for NFC_IRQMASK */
#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */
-#define nMASK_BUSYIRQ 0x0
+#define nMASK_BUSYIRQ 0x0
#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */
-#define nMASK_WBOVF 0x0
+#define nMASK_WBOVF 0x0
#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */
-#define nMASK_WBEMPTY 0x0
+#define nMASK_WBEMPTY 0x0
#define MASK_RDRDY 0x8 /* Mask Read Data Ready */
-#define nMASK_RDRDY 0x0
+#define nMASK_RDRDY 0x0
#define MASK_WRDONE 0x10 /* Mask Write Done */
-#define nMASK_WRDONE 0x0
+#define nMASK_WRDONE 0x0
/* Bit masks for NFC_RST */
#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */
-#define nECC_RST 0x0
+#define nECC_RST 0x0
/* Bit masks for NFC_PGCTL */
#define PG_RD_START 0x1 /* Page Read Start */
-#define nPG_RD_START 0x0
+#define nPG_RD_START 0x0
#define PG_WR_START 0x2 /* Page Write Start */
-#define nPG_WR_START 0x0
+#define nPG_WR_START 0x0
/* Bit masks for NFC_ECC0 */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff