L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
-F: arch/arm/mach-bcm2835/
+F: arch/arm/mach-bcm/board_bcm2835.c
F: arch/arm/boot/dts/bcm2835*
F: arch/arm/configs/bcm2835_defconfig
F: drivers/*/*bcm2835*
source "arch/arm/mach-bcm/Kconfig"
-source "arch/arm/mach-bcm2835/Kconfig"
-
source "arch/arm/mach-berlin/Kconfig"
source "arch/arm/mach-clps711x/Kconfig"
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_BCM) += bcm
-machine-$(CONFIG_ARCH_BCM2835) += bcm2835
machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
CONFIG_JUMP_LABEL=y
CONFIG_ARCH_MULTI_V6=y
# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
BCM11130, BCM11140, BCM11351, BCM28145 and
BCM28155 variants.
+config ARCH_BCM2835
+ bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_ERRATA_411920
+ select ARM_TIMER_SP804
+ select CLKDEV_LOOKUP
+ select CLKSRC_OF
+ select CPU_V6
+ select GENERIC_CLOCKEVENTS
+ select PINCTRL
+ select PINCTRL_BCM2835
+ help
+ This enables support for the Broadcom BCM2835 SoC. This SoC is
+ used in the Raspberry Pi and Roku 2 devices.
+
endmenu
endif
# GNU General Public License for more details.
obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
+obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
+
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
--- /dev/null
+/*
+ * Copyright (C) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/clk/bcm2835.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#define PM_RSTC 0x1c
+#define PM_RSTS 0x20
+#define PM_WDOG 0x24
+
+#define PM_PASSWORD 0x5a000000
+#define PM_RSTC_WRCFG_MASK 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTS_HADWRH_SET 0x00000040
+
+#define BCM2835_PERIPH_PHYS 0x20000000
+#define BCM2835_PERIPH_VIRT 0xf0000000
+#define BCM2835_PERIPH_SIZE SZ_16M
+
+static void __iomem *wdt_regs;
+
+/*
+ * The machine restart method can be called from an atomic context so we won't
+ * be able to ioremap the regs then.
+ */
+static void bcm2835_setup_restart(void)
+{
+ struct device_node *np = of_find_compatible_node(NULL, NULL,
+ "brcm,bcm2835-pm-wdt");
+ if (WARN(!np, "unable to setup watchdog restart"))
+ return;
+
+ wdt_regs = of_iomap(np, 0);
+ WARN(!wdt_regs, "failed to remap watchdog regs");
+}
+
+static void bcm2835_restart(enum reboot_mode mode, const char *cmd)
+{
+ u32 val;
+
+ if (!wdt_regs)
+ return;
+
+ /* use a timeout of 10 ticks (~150us) */
+ writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG);
+ val = readl_relaxed(wdt_regs + PM_RSTC);
+ val &= ~PM_RSTC_WRCFG_MASK;
+ val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
+ writel_relaxed(val, wdt_regs + PM_RSTC);
+
+ /* No sleeping, possibly atomic. */
+ mdelay(1);
+}
+
+/*
+ * We can't really power off, but if we do the normal reset scheme, and
+ * indicate to bootcode.bin not to reboot, then most of the chip will be
+ * powered off.
+ */
+static void bcm2835_power_off(void)
+{
+ u32 val;
+
+ /*
+ * We set the watchdog hard reset bit here to distinguish this reset
+ * from the normal (full) reset. bootcode.bin will not reboot after a
+ * hard reset.
+ */
+ val = readl_relaxed(wdt_regs + PM_RSTS);
+ val &= ~PM_RSTC_WRCFG_MASK;
+ val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
+ writel_relaxed(val, wdt_regs + PM_RSTS);
+
+ /* Continue with normal reset mechanism */
+ bcm2835_restart(REBOOT_HARD, "");
+}
+
+static struct map_desc io_map __initdata = {
+ .virtual = BCM2835_PERIPH_VIRT,
+ .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
+ .length = BCM2835_PERIPH_SIZE,
+ .type = MT_DEVICE
+};
+
+static void __init bcm2835_map_io(void)
+{
+ iotable_init(&io_map, 1);
+}
+
+static void __init bcm2835_init(void)
+{
+ int ret;
+
+ bcm2835_setup_restart();
+ if (wdt_regs)
+ pm_power_off = bcm2835_power_off;
+
+ bcm2835_init_clocks();
+
+ ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
+ NULL);
+ if (ret) {
+ pr_err("of_platform_populate failed: %d\n", ret);
+ BUG();
+ }
+}
+
+static const char * const bcm2835_compat[] = {
+ "brcm,bcm2835",
+ NULL
+};
+
+DT_MACHINE_START(BCM2835, "BCM2835")
+ .map_io = bcm2835_map_io,
+ .init_irq = irqchip_init,
+ .init_machine = bcm2835_init,
+ .restart = bcm2835_restart,
+ .dt_compat = bcm2835_compat
+MACHINE_END
+++ /dev/null
-config ARCH_BCM2835
- bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select ARM_ERRATA_411920
- select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
- select CLKSRC_OF
- select CPU_V6
- select GENERIC_CLOCKEVENTS
- select PINCTRL
- select PINCTRL_BCM2835
- help
- This enables support for the Broadcom BCM2835 SoC. This SoC is
- used in the Raspberry Pi and Roku 2 devices.
+++ /dev/null
-obj-y += bcm2835.o
+++ /dev/null
-/*
- * Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irqchip.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/clk/bcm2835.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#define PM_RSTC 0x1c
-#define PM_RSTS 0x20
-#define PM_WDOG 0x24
-
-#define PM_PASSWORD 0x5a000000
-#define PM_RSTC_WRCFG_MASK 0x00000030
-#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
-#define PM_RSTS_HADWRH_SET 0x00000040
-
-#define BCM2835_PERIPH_PHYS 0x20000000
-#define BCM2835_PERIPH_VIRT 0xf0000000
-#define BCM2835_PERIPH_SIZE SZ_16M
-
-static void __iomem *wdt_regs;
-
-/*
- * The machine restart method can be called from an atomic context so we won't
- * be able to ioremap the regs then.
- */
-static void bcm2835_setup_restart(void)
-{
- struct device_node *np = of_find_compatible_node(NULL, NULL,
- "brcm,bcm2835-pm-wdt");
- if (WARN(!np, "unable to setup watchdog restart"))
- return;
-
- wdt_regs = of_iomap(np, 0);
- WARN(!wdt_regs, "failed to remap watchdog regs");
-}
-
-static void bcm2835_restart(enum reboot_mode mode, const char *cmd)
-{
- u32 val;
-
- if (!wdt_regs)
- return;
-
- /* use a timeout of 10 ticks (~150us) */
- writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG);
- val = readl_relaxed(wdt_regs + PM_RSTC);
- val &= ~PM_RSTC_WRCFG_MASK;
- val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
- writel_relaxed(val, wdt_regs + PM_RSTC);
-
- /* No sleeping, possibly atomic. */
- mdelay(1);
-}
-
-/*
- * We can't really power off, but if we do the normal reset scheme, and
- * indicate to bootcode.bin not to reboot, then most of the chip will be
- * powered off.
- */
-static void bcm2835_power_off(void)
-{
- u32 val;
-
- /*
- * We set the watchdog hard reset bit here to distinguish this reset
- * from the normal (full) reset. bootcode.bin will not reboot after a
- * hard reset.
- */
- val = readl_relaxed(wdt_regs + PM_RSTS);
- val &= ~PM_RSTC_WRCFG_MASK;
- val |= PM_PASSWORD | PM_RSTS_HADWRH_SET;
- writel_relaxed(val, wdt_regs + PM_RSTS);
-
- /* Continue with normal reset mechanism */
- bcm2835_restart(REBOOT_HARD, "");
-}
-
-static struct map_desc io_map __initdata = {
- .virtual = BCM2835_PERIPH_VIRT,
- .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS),
- .length = BCM2835_PERIPH_SIZE,
- .type = MT_DEVICE
-};
-
-static void __init bcm2835_map_io(void)
-{
- iotable_init(&io_map, 1);
-}
-
-static void __init bcm2835_init(void)
-{
- int ret;
-
- bcm2835_setup_restart();
- if (wdt_regs)
- pm_power_off = bcm2835_power_off;
-
- bcm2835_init_clocks();
-
- ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
- NULL);
- if (ret) {
- pr_err("of_platform_populate failed: %d\n", ret);
- BUG();
- }
-}
-
-static const char * const bcm2835_compat[] = {
- "brcm,bcm2835",
- NULL
-};
-
-DT_MACHINE_START(BCM2835, "BCM2835")
- .map_io = bcm2835_map_io,
- .init_irq = irqchip_init,
- .init_machine = bcm2835_init,
- .restart = bcm2835_restart,
- .dt_compat = bcm2835_compat
-MACHINE_END
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff