* Set up USB clock/mode in the CFGCHIP2 register.
* FYI: CFGCHIP2 is 0x0000ef00 initially.
*/
- cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+ cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* USB2.0 PHY reference clock is 24 MHz */
cfgchip2 &= ~CFGCHIP2_REFFREQ;
cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
#endif
- __raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+ __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* USB_REFCLKIN is not used. */
ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
if (!machine_is_davinci_da850_evm())
return 0;
- cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+ cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
val = __raw_readl(cfg_chip3_base);
void __init da830_init(void)
{
- da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
- if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
return;
davinci_soc_info_da830.jtag_id_base =
- DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
- davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+ DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG);
+ davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da830);
}
}
}
- v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+ v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
if (pllnum)
v |= CFGCHIP3_ASYNC3_CLKSRC;
else
v &= ~CFGCHIP3_ASYNC3_CLKSRC;
- __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+ __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
}
#ifdef CONFIG_CPU_FREQ
postdiv = opp->postdiv;
/* Unlock writing to PLL registers */
- v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+ v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
v &= ~CFGCHIP0_PLL_MASTER_LOCK;
- __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+ __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
if (WARN_ON(ret))
void __init da850_init(void)
{
- da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
- if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module"))
+ return;
+
+ da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
return;
davinci_soc_info_da850.jtag_id_base =
- DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
- davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+ DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG);
+ davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120);
davinci_common_init(&davinci_soc_info_da850);
#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
-void __iomem *da8xx_syscfg_base;
+void __iomem *da8xx_syscfg0_base;
+void __iomem *da8xx_syscfg1_base;
static struct plat_serial8250_port da8xx_serial_pdata[] = {
{
#include <mach/mmc.h>
#include <mach/usb.h>
-extern void __iomem *da8xx_syscfg_base;
+extern void __iomem *da8xx_syscfg0_base;
+extern void __iomem *da8xx_syscfg1_base;
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
#define DA8XX_CP_INTC_SIZE SZ_8K
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
-#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000)
-#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x))
+#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x))
#define DA8XX_JTAG_ID_REG 0x18
#define DA8XX_CFGCHIP0_REG 0x17c
#define DA8XX_CFGCHIP2_REG 0x184
#define DA8XX_CFGCHIP3_REG 0x188
+#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000)
+#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x))
+
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
#define DA8XX_TIMER64P0_BASE 0x01c20000