[media] si2168: Implement own I2C adapter locking
authorAntti Palosaari <crope@iki.fi>
Fri, 29 May 2015 19:42:33 +0000 (16:42 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Fri, 5 Jun 2015 09:32:05 +0000 (06:32 -0300)
We need own I2C locking because of tuner I2C adapter/repeater.
Firmware command is executed using I2C send + reply message. Default
I2C adapter locking protects only single I2C operation, not whole
send + reply sequence as needed. Due to that, it was possible tuner
I2C message interrupts firmware command sequence.

Reported-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/dvb-frontends/si2168.c
drivers/media/dvb-frontends/si2168_priv.h

index b68ab346b93be480fe0b3365807b980a99ece4dc..d6a4cb0688c3528305afb56642ca4eff470dbaac 100644 (file)
 
 static const struct dvb_frontend_ops si2168_ops;
 
+/* Own I2C adapter locking is needed because of I2C gate logic. */
+static int si2168_i2c_master_send_unlocked(const struct i2c_client *client,
+                                          const char *buf, int count)
+{
+       int ret;
+       struct i2c_msg msg = {
+               .addr = client->addr,
+               .flags = 0,
+               .len = count,
+               .buf = (char *)buf,
+       };
+
+       ret = __i2c_transfer(client->adapter, &msg, 1);
+       return (ret == 1) ? count : ret;
+}
+
+static int si2168_i2c_master_recv_unlocked(const struct i2c_client *client,
+                                          char *buf, int count)
+{
+       int ret;
+       struct i2c_msg msg = {
+               .addr = client->addr,
+               .flags = I2C_M_RD,
+               .len = count,
+               .buf = buf,
+       };
+
+       ret = __i2c_transfer(client->adapter, &msg, 1);
+       return (ret == 1) ? count : ret;
+}
+
 /* execute firmware command */
-static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd)
+static int si2168_cmd_execute_unlocked(struct i2c_client *client,
+                                      struct si2168_cmd *cmd)
 {
-       struct si2168_dev *dev = i2c_get_clientdata(client);
        int ret;
        unsigned long timeout;
 
-       mutex_lock(&dev->i2c_mutex);
-
        if (cmd->wlen) {
                /* write cmd and args for firmware */
-               ret = i2c_master_send(client, cmd->args, cmd->wlen);
+               ret = si2168_i2c_master_send_unlocked(client, cmd->args,
+                                                     cmd->wlen);
                if (ret < 0) {
-                       goto err_mutex_unlock;
+                       goto err;
                } else if (ret != cmd->wlen) {
                        ret = -EREMOTEIO;
-                       goto err_mutex_unlock;
+                       goto err;
                }
        }
 
@@ -43,12 +73,13 @@ static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd)
                #define TIMEOUT 70
                timeout = jiffies + msecs_to_jiffies(TIMEOUT);
                while (!time_after(jiffies, timeout)) {
-                       ret = i2c_master_recv(client, cmd->args, cmd->rlen);
+                       ret = si2168_i2c_master_recv_unlocked(client, cmd->args,
+                                                             cmd->rlen);
                        if (ret < 0) {
-                               goto err_mutex_unlock;
+                               goto err;
                        } else if (ret != cmd->rlen) {
                                ret = -EREMOTEIO;
-                               goto err_mutex_unlock;
+                               goto err;
                        }
 
                        /* firmware ready? */
@@ -63,24 +94,32 @@ static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd)
                /* error bit set? */
                if ((cmd->args[0] >> 6) & 0x01) {
                        ret = -EREMOTEIO;
-                       goto err_mutex_unlock;
+                       goto err;
                }
 
                if (!((cmd->args[0] >> 7) & 0x01)) {
                        ret = -ETIMEDOUT;
-                       goto err_mutex_unlock;
+                       goto err;
                }
        }
 
-       mutex_unlock(&dev->i2c_mutex);
        return 0;
-
-err_mutex_unlock:
-       mutex_unlock(&dev->i2c_mutex);
+err:
        dev_dbg(&client->dev, "failed=%d\n", ret);
        return ret;
 }
 
+static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd)
+{
+       int ret;
+
+       i2c_lock_adapter(client->adapter);
+       ret = si2168_cmd_execute_unlocked(client, cmd);
+       i2c_unlock_adapter(client->adapter);
+
+       return ret;
+}
+
 static int si2168_read_status(struct dvb_frontend *fe, fe_status_t *status)
 {
        struct i2c_client *client = fe->demodulator_priv;
@@ -569,60 +608,46 @@ static int si2168_get_tune_settings(struct dvb_frontend *fe,
 
 /*
  * I2C gate logic
- * We must use unlocked i2c_transfer() here because I2C lock is already taken
- * by tuner driver.
+ * We must use unlocked I2C I/O because I2C adapter lock is already taken
+ * by the caller (usually tuner driver).
  */
 static int si2168_select(struct i2c_adapter *adap, void *mux_priv, u32 chan)
 {
        struct i2c_client *client = mux_priv;
-       struct si2168_dev *dev = i2c_get_clientdata(client);
        int ret;
-       struct i2c_msg gate_open_msg = {
-               .addr = client->addr,
-               .flags = 0,
-               .len = 3,
-               .buf = "\xc0\x0d\x01",
-       };
-
-       mutex_lock(&dev->i2c_mutex);
+       struct si2168_cmd cmd;
 
-       /* open tuner I2C gate */
-       ret = __i2c_transfer(client->adapter, &gate_open_msg, 1);
-       if (ret != 1) {
-               dev_warn(&client->dev, "i2c write failed=%d\n", ret);
-               if (ret >= 0)
-                       ret = -EREMOTEIO;
-       } else {
-               ret = 0;
-       }
+       /* open I2C gate */
+       memcpy(cmd.args, "\xc0\x0d\x01", 3);
+       cmd.wlen = 3;
+       cmd.rlen = 0;
+       ret = si2168_cmd_execute_unlocked(client, &cmd);
+       if (ret)
+               goto err;
 
+       return 0;
+err:
+       dev_dbg(&client->dev, "failed=%d\n", ret);
        return ret;
 }
 
 static int si2168_deselect(struct i2c_adapter *adap, void *mux_priv, u32 chan)
 {
        struct i2c_client *client = mux_priv;
-       struct si2168_dev *dev = i2c_get_clientdata(client);
        int ret;
-       struct i2c_msg gate_close_msg = {
-               .addr = client->addr,
-               .flags = 0,
-               .len = 3,
-               .buf = "\xc0\x0d\x00",
-       };
-
-       /* close tuner I2C gate */
-       ret = __i2c_transfer(client->adapter, &gate_close_msg, 1);
-       if (ret != 1) {
-               dev_warn(&client->dev, "i2c write failed=%d\n", ret);
-               if (ret >= 0)
-                       ret = -EREMOTEIO;
-       } else {
-               ret = 0;
-       }
+       struct si2168_cmd cmd;
 
-       mutex_unlock(&dev->i2c_mutex);
+       /* close I2C gate */
+       memcpy(cmd.args, "\xc0\x0d\x00", 3);
+       cmd.wlen = 3;
+       cmd.rlen = 0;
+       ret = si2168_cmd_execute_unlocked(client, &cmd);
+       if (ret)
+               goto err;
 
+       return 0;
+err:
+       dev_dbg(&client->dev, "failed=%d\n", ret);
        return ret;
 }
 
@@ -679,8 +704,6 @@ static int si2168_probe(struct i2c_client *client,
                goto err;
        }
 
-       mutex_init(&dev->i2c_mutex);
-
        /* create mux i2c adapter for tuner */
        dev->adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
                        client, 0, 0, 0, si2168_select, si2168_deselect);
index d2589e3d2ff2f834334f6c4bbf3e5a96e2034cee..90b6b6eace24ce9f178145d8025bbf30fedb47ee 100644 (file)
@@ -30,7 +30,6 @@
 /* state struct */
 struct si2168_dev {
        struct i2c_adapter *adapter;
-       struct mutex i2c_mutex;
        struct dvb_frontend fe;
        fe_delivery_system_t delivery_system;
        fe_status_t fe_status;