ARM: dts: cm-t335: add support for bluetooth

bluetooth HW is WLS1271 chip connected to UART1.

Device tree modifications:
- Pinmux for UART1.
- Pinmux for bluetooth enable GPIO.

Bluetooth enable GPIO is set to enable during startup by setting the
relevant pinmux pin to pull-up.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
index ae2366e1eb4cfca6dd0c862c1128070f3ba2cd65..42e9b665582ab2672f6b112549d4178e5dc63d38 100644 (file)
--- a/arch/arm/boot/dts/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -50,7 +50,7 @@
 
 &am33xx_pinmux {
        pinctrl-names = "default";
-       pinctrl-0 = <>;
+       pinctrl-0 = <&bluetooth_pins>;
 
        i2c0_pins: pinmux_i2c0_pins {
                pinctrl-single,pins = <
@@ -121,6 +121,19 @@
                >;
        };
 
+       uart1_pins: pinmux_uart1_pins {
+               pinctrl-single,pins = <
+                       /* uart1_ctsn.uart1_ctsn */
+                       AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
+                       /* uart1_rtsn.uart1_rtsn */
+                       AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+                       /* uart1_rxd.uart1_rxd */
+                       AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
+                       /* uart1_txd.uart1_txd */
+                       AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+               >;
+       };
+
        ecap0_pins: pinmux_ecap0_pins {
                pinctrl-single,pins = <
                        /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
@@ -209,6 +222,14 @@
                        AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
                >;
        };
+
+       /* wl1271 bluetooth */
+       bluetooth_pins: pinmux_bluetooth_pins {
+               pinctrl-single,pins = <
+                       /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+                       AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
+               >;
+       };
 };
 
 &uart0 {
@@ -218,6 +239,14 @@
        status = "okay";
 };
 
+/* WLS1271 bluetooth */
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
 &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&i2c0_pins>;