usb: dwc2: Update parameter types

Update the param types to appropriately sized ints and bools.

Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 7256b9f7097a12acd102d2a1609cc4361c2604e4..c6f62648ad97f172bfeaace0efbb31eeb0c309c7 100644 (file)
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -452,50 +452,50 @@ enum dwc2_ep0_state {
  * default described above.
  */
 struct dwc2_core_params {
-       int otg_cap;
+       u8 otg_cap;
 #define DWC2_CAP_PARAM_HNP_SRP_CAPABLE         0
 #define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE                1
 #define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE      2
 
-       int dma_desc_enable;
-       int dma_desc_fs_enable;
-       int speed;
+       bool dma_desc_enable;
+       bool dma_desc_fs_enable;
+       u8 speed;
 #define DWC2_SPEED_PARAM_HIGH  0
 #define DWC2_SPEED_PARAM_FULL  1
 #define DWC2_SPEED_PARAM_LOW   2
 
-       int enable_dynamic_fifo;
-       int en_multiple_tx_fifo;
-       int host_rx_fifo_size;
-       int host_nperio_tx_fifo_size;
-       int host_perio_tx_fifo_size;
-       int max_transfer_size;
-       int max_packet_count;
-       int host_channels;
-       int phy_type;
+       bool enable_dynamic_fifo;
+       bool en_multiple_tx_fifo;
+       u16 host_rx_fifo_size;
+       u16 host_nperio_tx_fifo_size;
+       u16 host_perio_tx_fifo_size;
+       u32 max_transfer_size;
+       u16 max_packet_count;
+       u8 host_channels;
+       u8 phy_type;
 #define DWC2_PHY_TYPE_PARAM_FS         0
 #define DWC2_PHY_TYPE_PARAM_UTMI       1
 #define DWC2_PHY_TYPE_PARAM_ULPI       2
 
-       int phy_utmi_width;
-       int phy_ulpi_ddr;
-       int phy_ulpi_ext_vbus;
+       u8 phy_utmi_width;
+       bool phy_ulpi_ddr;
+       bool phy_ulpi_ext_vbus;
 #define DWC2_PHY_ULPI_INTERNAL_VBUS    0
 #define DWC2_PHY_ULPI_EXTERNAL_VBUS    1
 
-       int i2c_enable;
-       int ulpi_fs_ls;
-       int host_support_fs_ls_low_power;
-       int host_ls_low_power_phy_clk;
+       bool i2c_enable;
+       bool ulpi_fs_ls;
+       bool host_support_fs_ls_low_power;
+       bool host_ls_low_power_phy_clk;
 #define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ     0
 #define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ      1
 
-       int ts_dline;
-       int reload_ctl;
-       int ahbcfg;
-       int uframe_sched;
-       int external_id_pin_ctl;
-       int hibernation;
+       bool ts_dline;
+       bool reload_ctl;
+       u32 ahbcfg;
+       bool uframe_sched;
+       bool external_id_pin_ctl;
+       bool hibernation;
 
        /*
         * The following parameters are *only* set via device