[MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 203f90a024db8ed4e5bf6ae7e3889caecf2090f5..3db77eec0ed2539031c807732858dda2a21c39fc 100644 (file)
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -135,6 +135,16 @@ config MTD_NAND_NDFC
        help
         NDFC Nand Flash Controllers are integrated in EP44x SoCs
 
+config MTD_NAND_S3C2410_CLKSTOP
+       bool "S3C2410 NAND IDLE clock stop"
+       depends on MTD_NAND_S3C2410
+       default n
+       help
+         Stop the clock to the NAND controller when there is no chip
+         selected to save power. This will mean there is a small delay
+         when the is NAND chip selected or released, but will save
+         approximately 5mA of power when there is nothing happening.
+
 config MTD_NAND_DISKONCHIP
        tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
        depends on MTD_NAND && EXPERIMENTAL

diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index d6365a668874f5c040d0db44f532aa357832d89c..fd78fb83549ebd7b95e1706382d6244e26bdd6f8 100644 (file)
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -18,8 +18,9 @@
  *     20-Jun-2005  BJD  Updated s3c2440 support, fixed timing bug
  *     08-Jul-2005  BJD  Fix OOPS when no platform data supplied
  *     20-Oct-2005  BJD  Fix timing calculation bug
+ *     14-Jan-2006  BJD  Allow clock to be stopped when idle
  *
- * $Id: s3c2410.c,v 1.20 2005/11/07 11:14:31 gleixner Exp $
+ * $Id: s3c2410.c,v 1.23 2006/04/01 18:06:29 bjd Exp $
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -36,9 +37,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-#include <config/mtd/nand/s3c2410/hwecc.h>
-#include <config/mtd/nand/s3c2410/debug.h>
-
 #ifdef CONFIG_MTD_NAND_S3C2410_DEBUG
 #define DEBUG
 #endif
@@ -73,6 +71,13 @@ static int hardware_ecc = 1;
 static int hardware_ecc = 0;
 #endif
 
+#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
+static int clock_stop = 1;
+#else
+static const int clock_stop = 0;
+#endif
+
+
 /* new oob placement block for use with hardware ecc generation
  */
 
@@ -134,6 +139,11 @@ static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev)
        return dev->dev.platform_data;
 }
 
+static inline int allow_clk_stop(struct s3c2410_nand_info *info)
+{
+       return clock_stop;
+}
+
 /* timing calculations */
 
 #define NS_IN_KHZ 1000000
@@ -201,6 +211,11 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info, struct platform_d
                cfg = S3C2440_NFCONF_TACLS(tacls - 1);
                cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
                cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+
+               /* enable the controller and de-assert nFCE */
+
+               writel(S3C2440_NFCONT_ENABLE | S3C2440_NFCONT_ENABLE,
+                      info->regs + S3C2440_NFCONT);
        }
 
        pr_debug(PFX "NF_CONF is 0x%lx\n", cfg);
@@ -226,6 +241,9 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
        bit = (info->is_s3c2440) ? S3C2440_NFCONT_nFCE : S3C2410_NFCONF_nFCE;
        reg = info->regs + ((info->is_s3c2440) ? S3C2440_NFCONT : S3C2410_NFCONF);
 
+       if (chip != -1 && allow_clk_stop(info))
+               clk_enable(info->clk);
+
        cur = readl(reg);
 
        if (chip == -1) {
@@ -245,6 +263,9 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
        }
 
        writel(cur, reg);
+
+       if (chip == -1 && allow_clk_stop(info))
+               clk_disable(info->clk);
 }
 
 /* command and control functions
@@ -417,7 +438,8 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
        /* free the common resources */
 
        if (info->clk != NULL && !IS_ERR(info->clk)) {
-               clk_disable(info->clk);
+               if (!allow_clk_stop(info))
+                       clk_disable(info->clk);
                clk_put(info->clk);
        }
 
@@ -627,6 +649,11 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
                        sets++;
        }
 
+       if (allow_clk_stop(info)) {
+               dev_info(&pdev->dev, "clock idle support enabled\n");
+               clk_disable(info->clk);
+       }
+
        pr_debug("initialised ok\n");
        return 0;
 
@@ -638,6 +665,41 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, int is_s3c2440)
        return err;
 }
 
+/* PM Support */
+#ifdef CONFIG_PM
+
+static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
+{
+       struct s3c2410_nand_info *info = platform_get_drvdata(dev);
+
+       if (info) {
+               if (!allow_clk_stop(info))
+                       clk_disable(info->clk);
+       }
+
+       return 0;
+}
+
+static int s3c24xx_nand_resume(struct platform_device *dev)
+{
+       struct s3c2410_nand_info *info = platform_get_drvdata(dev);
+
+       if (info) {
+               clk_enable(info->clk);
+               s3c2410_nand_inithw(info, dev);
+
+               if (allow_clk_stop(info))
+                       clk_disable(info->clk);
+       }
+
+       return 0;
+}
+
+#else
+#define s3c24xx_nand_suspend NULL
+#define s3c24xx_nand_resume NULL
+#endif
+
 /* driver device registration */
 
 static int s3c2410_nand_probe(struct platform_device *dev)
@@ -653,6 +715,8 @@ static int s3c2440_nand_probe(struct platform_device *dev)
 static struct platform_driver s3c2410_nand_driver = {
        .probe          = s3c2410_nand_probe,
        .remove         = s3c2410_nand_remove,
+       .suspend        = s3c24xx_nand_suspend,
+       .resume         = s3c24xx_nand_resume,
        .driver         = {
                .name   = "s3c2410-nand",
                .owner  = THIS_MODULE,
@@ -662,6 +726,8 @@ static struct platform_driver s3c2410_nand_driver = {
 static struct platform_driver s3c2440_nand_driver = {
        .probe          = s3c2440_nand_probe,
        .remove         = s3c2410_nand_remove,
+       .suspend        = s3c24xx_nand_suspend,
+       .resume         = s3c24xx_nand_resume,
        .driver         = {
                .name   = "s3c2440-nand",
                .owner  = THIS_MODULE,