[SCSI] hpsa: improve error messages for driver initiated commands

On encountering unexpected error conditions from driver initiated
commands, print something useful like CDB and sense data rather than
something useless like the kernel virtual address of the command buffer.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 6e5dbbf58bee6a1c88018e9d2dfa44fd7ffc7778..e36e3102c45c9eb378a65aea8da9bc0115ef766d 100644 (file)
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1847,17 +1847,37 @@ static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
        hpsa_pci_unmap(h->pdev, c, 1, data_direction);
 }
 
-static void hpsa_scsi_interpret_error(struct CommandList *cp)
+static void hpsa_print_cmd(struct ctlr_info *h, char *txt,
+                               struct CommandList *c)
 {
-       struct ErrorInfo *ei;
+       const u8 *cdb = c->Request.CDB;
+       const u8 *lun = c->Header.LUN.LunAddrBytes;
+
+       dev_warn(&h->pdev->dev, "%s: LUN:%02x%02x%02x%02x%02x%02x%02x%02x"
+       " CDB:%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+               txt, lun[0], lun[1], lun[2], lun[3],
+               lun[4], lun[5], lun[6], lun[7],
+               cdb[0], cdb[1], cdb[2], cdb[3],
+               cdb[4], cdb[5], cdb[6], cdb[7],
+               cdb[8], cdb[9], cdb[10], cdb[11],
+               cdb[12], cdb[13], cdb[14], cdb[15]);
+}
+
+static void hpsa_scsi_interpret_error(struct ctlr_info *h,
+                       struct CommandList *cp)
+{
+       const struct ErrorInfo *ei = cp->err_info;
        struct device *d = &cp->h->pdev->dev;
+       const u8 *sd = ei->SenseInfo;
 
-       ei = cp->err_info;
        switch (ei->CommandStatus) {
        case CMD_TARGET_STATUS:
-               dev_warn(d, "cmd %p has completed with errors\n", cp);
-               dev_warn(d, "cmd %p has SCSI Status = %x\n", cp,
-                               ei->ScsiStatus);
+               hpsa_print_cmd(h, "SCSI status", cp);
+               if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION)
+                       dev_warn(d, "SCSI Status = 02, Sense key = %02x, ASC = %02x, ASCQ = %02x\n",
+                               sd[2] & 0x0f, sd[12], sd[13]);
+               else
+                       dev_warn(d, "SCSI Status = %02x\n", ei->ScsiStatus);
                if (ei->ScsiStatus == 0)
                        dev_warn(d, "SCSI status is abnormally zero.  "
                        "(probably indicates selection timeout "
@@ -1865,48 +1885,45 @@ static void hpsa_scsi_interpret_error(struct CommandList *cp)
                        "firmware bug, circa July, 2001.)\n");
                break;
        case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
-                       dev_info(d, "UNDERRUN\n");
                break;
        case CMD_DATA_OVERRUN:
-               dev_warn(d, "cp %p has completed with data overrun\n", cp);
+               hpsa_print_cmd(h, "overrun condition", cp);
                break;
        case CMD_INVALID: {
                /* controller unfortunately reports SCSI passthru's
                 * to non-existent targets as invalid commands.
                 */
-               dev_warn(d, "cp %p is reported invalid (probably means "
-                       "target device no longer present)\n", cp);
-               /* print_bytes((unsigned char *) cp, sizeof(*cp), 1, 0);
-               print_cmd(cp);  */
+               hpsa_print_cmd(h, "invalid command", cp);
+               dev_warn(d, "probably means device no longer present\n");
                }
                break;
        case CMD_PROTOCOL_ERR:
-               dev_warn(d, "cp %p has protocol error \n", cp);
+               hpsa_print_cmd(h, "protocol error", cp);
                break;
        case CMD_HARDWARE_ERR:
-               /* cmd->result = DID_ERROR << 16; */
-               dev_warn(d, "cp %p had hardware error\n", cp);
+               hpsa_print_cmd(h, "hardware error", cp);
                break;
        case CMD_CONNECTION_LOST:
-               dev_warn(d, "cp %p had connection lost\n", cp);
+               hpsa_print_cmd(h, "connection lost", cp);
                break;
        case CMD_ABORTED:
-               dev_warn(d, "cp %p was aborted\n", cp);
+               hpsa_print_cmd(h, "aborted", cp);
                break;
        case CMD_ABORT_FAILED:
-               dev_warn(d, "cp %p reports abort failed\n", cp);
+               hpsa_print_cmd(h, "abort failed", cp);
                break;
        case CMD_UNSOLICITED_ABORT:
-               dev_warn(d, "cp %p aborted due to an unsolicited abort\n", cp);
+               hpsa_print_cmd(h, "unsolicited abort", cp);
                break;
        case CMD_TIMEOUT:
-               dev_warn(d, "cp %p timed out\n", cp);
+               hpsa_print_cmd(h, "timed out", cp);
                break;
        case CMD_UNABORTABLE:
-               dev_warn(d, "Command unabortable\n");
+               hpsa_print_cmd(h, "unabortable", cp);
                break;
        default:
-               dev_warn(d, "cp %p returned unknown status %x\n", cp,
+               hpsa_print_cmd(h, "unknown status", cp);
+               dev_warn(d, "Unknown command status %x\n",
                                ei->CommandStatus);
        }
 }
@@ -1934,7 +1951,7 @@ static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
        hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
-               hpsa_scsi_interpret_error(c);
+               hpsa_scsi_interpret_error(h, c);
                rc = -1;
        }
 out:
@@ -1965,7 +1982,7 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
 
        ei = c->err_info;
        if (ei->CommandStatus != 0) {
-               hpsa_scsi_interpret_error(c);
+               hpsa_scsi_interpret_error(h, c);
                rc = -1;
        }
        cmd_special_free(h, c);
@@ -2089,7 +2106,7 @@ static int hpsa_get_raid_map(struct ctlr_info *h,
        hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_FROMDEVICE);
        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
-               hpsa_scsi_interpret_error(c);
+               hpsa_scsi_interpret_error(h, c);
                cmd_special_free(h, c);
                return -1;
        }
@@ -2231,7 +2248,7 @@ static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
        ei = c->err_info;
        if (ei->CommandStatus != 0 &&
            ei->CommandStatus != CMD_DATA_UNDERRUN) {
-               hpsa_scsi_interpret_error(c);
+               hpsa_scsi_interpret_error(h, c);
                rc = -1;
        } else {
                if (buf->extended_response_flag != extended_response) {
@@ -3975,7 +3992,7 @@ static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
        default:
                dev_dbg(&h->pdev->dev, "%s: Tag:0x%08x:%08x: interpreting error.\n",
                        __func__, tagupper, taglower);
-               hpsa_scsi_interpret_error(c);
+               hpsa_scsi_interpret_error(h, c);
                rc = -1;
                break;
        }