---help---
This will enable the support for the Atheros wireless drivers.
ath5k, ath9k and ar9170 drivers share some common code, this option
- enables the common ath.ko module which currently shares just common
- regulatory EEPROM helpers but will likely be extended later to share
- more between modules.
+ enables the common ath.ko module which shares common helpers.
For more information and documentation on this module you can visit:
--- /dev/null
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH_H
+#define ATH_H
+
+#include <linux/skbuff.h>
+
+struct ath_common {
+ u16 cachelsz;
+};
+
+struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
+ u32 len,
+ gfp_t gfp_mask);
+
+#endif /* ATH_H */
#include "hw.h"
#include "rc.h"
#include "debug.h"
+#include "../ath.h"
struct ath_node;
struct ieee80211_hw *hw;
struct device *dev;
+ struct ath_common common;
+
spinlock_t wiphy_lock; /* spinlock to protect ath_wiphy data */
struct ath_wiphy *pri_wiphy;
struct ath_wiphy **sec_wiphy; /* secondary wiphys (virtual radios); may
u32 sc_flags; /* SC_OP_* */
u16 curtxpow;
u16 curaid;
- u16 cachelsz;
u8 nbcnvifs;
u16 nvifs;
u8 tx_chainmask;
*/
ath_read_cachesize(sc, &csz);
/* XXX assert csz is non-zero */
- sc->cachelsz = csz << 2; /* convert to bytes */
+ sc->common.cachelsz = csz << 2; /* convert to bytes */
ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
if (!ah) {
return (tsf & ~0x7fff) | rstamp;
}
-static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, u32 len, gfp_t gfp_mask)
-{
- struct sk_buff *skb;
- u32 off;
-
- /*
- * Cache-line-align. This is important (for the
- * 5210 at least) as not doing so causes bogus data
- * in rx'd frames.
- */
-
- /* Note: the kernel can allocate a value greater than
- * what we ask it to give us. We really only need 4 KB as that
- * is this hardware supports and in fact we need at least 3849
- * as that is the MAX AMSDU size this hardware supports.
- * Unfortunately this means we may get 8 KB here from the
- * kernel... and that is actually what is observed on some
- * systems :( */
- skb = __dev_alloc_skb(len + sc->cachelsz - 1, gfp_mask);
- if (skb != NULL) {
- off = ((unsigned long) skb->data) % sc->cachelsz;
- if (off != 0)
- skb_reserve(skb, sc->cachelsz - off);
- } else {
- DPRINTF(sc, ATH_DBG_FATAL,
- "skbuff alloc of size %u failed\n", len);
- return NULL;
- }
-
- return skb;
-}
-
/*
* For Decrypt or Demic errors, we only mark packet status here and always push
* up the frame up to let mac80211 handle the actual error case, be it no
spin_lock_init(&sc->rx.rxbuflock);
sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
- min(sc->cachelsz, (u16)64));
+ min(sc->common.cachelsz, (u16)64));
DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
- sc->cachelsz, sc->rx.bufsize);
+ sc->common.cachelsz, sc->rx.bufsize);
/* Initialize rx descriptors */
}
list_for_each_entry(bf, &sc->rx.rxbuf, list) {
- skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_KERNEL);
+ skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_KERNEL);
if (skb == NULL) {
error = -ENOMEM;
goto err;
/* Ensure we always have an skb to requeue once we are done
* processing the current buffer's skb */
- requeue_skb = ath_rxbuf_alloc(sc, sc->rx.bufsize, GFP_ATOMIC);
+ requeue_skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_ATOMIC);
/* If there is no memory we ignore the current RX'd frame,
* tell hardware it can give us a new frame using the old
#include <linux/kernel.h>
#include <linux/module.h>
+#include "ath.h"
+
MODULE_AUTHOR("Atheros Communications");
MODULE_DESCRIPTION("Shared library for Atheros wireless LAN cards.");
MODULE_LICENSE("Dual BSD/GPL");
+
+struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
+ u32 len,
+ gfp_t gfp_mask)
+{
+ struct sk_buff *skb;
+ u32 off;
+
+ /*
+ * Cache-line-align. This is important (for the
+ * 5210 at least) as not doing so causes bogus data
+ * in rx'd frames.
+ */
+
+ /* Note: the kernel can allocate a value greater than
+ * what we ask it to give us. We really only need 4 KB as that
+ * is this hardware supports and in fact we need at least 3849
+ * as that is the MAX AMSDU size this hardware supports.
+ * Unfortunately this means we may get 8 KB here from the
+ * kernel... and that is actually what is observed on some
+ * systems :( */
+ skb = __dev_alloc_skb(len + common->cachelsz - 1, gfp_mask);
+ if (skb != NULL) {
+ off = ((unsigned long) skb->data) % common->cachelsz;
+ if (off != 0)
+ skb_reserve(skb, common->cachelsz - off);
+ } else {
+ printk(KERN_ERR "skbuff alloc of size %u failed\n", len);
+ return NULL;
+ }
+
+ return skb;
+}
+EXPORT_SYMBOL(ath_rxbuf_alloc);